Responsabilities

2018 – 2021: Project initiator, next leader of the Erasmus Mundus Joint Master Degree ‘European Master of Science in Advanced Solid Mechanics’ (STRAINS). Consortium: Université of Lille (France), Centrale Lille Institut (France), Catholic University of Louvain (Belgium), National Technical University of Athens (Greece), Wrocław University of Science and Technology (Poland), The University of Calabria (Cosenza, Italy)

2017 – 2020: French coordinator of the ANR-DFG project: « Systèmes dynamiques dissipatifs par méthodes géométriques et variationelles et application aux structures viscoplastiques soumises à des ondes de choc — Dissipative dynamische Systeme mit geometrischen Verfahren und Variationsmethoden, Anwendung für viskoplastische Strukturen unter Stoßwellenbelastung » (DDGV), with the Institut für Allgemeine Mechanik (IAM), RWTH Aachen University

2015 – 2019: Co-head of the Research team ‘Behaviour and Mechanisms of damage and fatigue: analysis and modeling (COREFoU)’. Laboratory of Mechanics, Multiphysics, Multiscales (LaMcube), UMR CNRS 9013.

2006 – 2012: Director of Doctoral Studies for ‘Mechanical Engineering, Civil Engineering, Energetics, Materials’ (240 Ph.D. students), Regional Doctoral School ‘Engineering Sciences’, France

2006 – 2007: Vice-Director of the Laboratory of Mechanics of Lille (CNRS mixed research laboratory, 200 members including 70 permanent academics and researchers), France

2004 – 2007: Project leader, next Director of the Bachelor of ‘Mechanics, Civil Engineering and Engineering Mechanics’, (3-year training, 120 students/year), University of Lille 1, France

2002 – 2006: Head of Department of Fundamental Mechanics (18 academics), University of Lille 1, France

2002 – 2005: Co-head of the research team ‘Mechanical reliability of materials and structures’ (24 permanent academics and researchers), Laboratory of Mechanics of Lille, France

2007-2015: Elected member of the National Council of Universities (CNU, committee carrying out the evaluation of Academics), Section ‘Mechanical and Civil Engineering’

 

 

► Colloquium, conference and congress organization

Chairman of the Selection and Monitoring Committee for the ’Congrès Français de Mécanique’ (CFM) in the ‘Association Française de Mécanique’ (AFM): 2013 in Bordeaux, 2015 in Lyon, and 2019 in Brest.

2015: Chairman of the scientific board of the Colloquium of the ‘Computational Structural Mechanics Association’ (CSMA, France), Giens, France

2013: Chairman of the Euromech Colloquium 548, ‘Direct and variational methods for nonsmooth problems in mechanics’, Amboise, France

2011 – Present: Chairman of 14 editions of the Souriau Colloquium (co-chairman in 2011 with Jean-Marie Souriau).

2015 – Present: Active participation in 8 éditions of the conference « Geometric Science of Information » (GSI), as co-chairman of the session « Geometric mechanics »

2022 – Present: Active participation in 3 éditions of the « International Conference on Nonlinear Solid Mechanics » (ICoNSoM), as co-chairman of the session « Continuum Mechanics and Geometry»

  • Prize

Best paper award of the international conference on "Geometric Science of Information" (GSI’25) for the paper « A new symmetry group for Physics to revisit the Kaluza-Klein theory », 31 October 2025

 

► Publishing activity

2020 – Present: associate editor of « Comptes-Rendus Mécanique » (journal in English of the French Academy of Sciences, https://comptes-rendus.academie-sciences.fr/mecanique)

In this journal: Géry De Saxce, Vladimir Salnikov (ed). Differential geometry and mechanics (special issue in preparation)

► Responsibilities held in learned societies

Elected member of the Steering Committee of the  group GTT-AUM (‘University Activities in Mechanics’) within the AFM (2005–2016).  This group is a key body of the French Association of Mechanics (AFM) which brings together academics and engineers. The GTT-AUM represents the university mechanics community at the national level.

Vice-Chairman of the GTT-AUM (2009-2013)

Chairman of the GTT-AUM (2013-2016)

Chair of the Jury for the Paul Germain Thesis Prize (CFM 2011 and 2013).

Elected member of the Steering Committee of the AFM (2019-Present)

2010-present: Member of the French National Committee of Mechanics (CNFM), France

Founding member of the “International Association on Direct Methods” (IADiMe, 2014) organizing a Workshop every 2 years, the last one 14 and 15 September 2026. The direct methods encompass the limit analysis and its powerful extension, the shakedown analysis when the structure is subjected to repeated variable loads, in particular to cyclic loads. They are elegant methods of calculation of the strength of structures which skips the elastoplastic loading by considering directly the collapse mechanism. The exact value of the collapse load can be reached by the static and kinematic approaches thanks to the so-called lower and upper bound theorems.