Didier Chicot

Professeur des universités CNU : SECTION 60 - MECANIQUE, GENIE MECANIQUE, GENIE CIVIL

ULR 4515 - LABORATOIRE DE GENIE CIVIL ET GEO-ENVIRONNEMENT

Publications

{ "response":{ "numFound":275, "start":0, "numFoundExact":true, "docs":[{ "citationRef_s":"Materials and structures, 2024, 57 (235), <a target=\"_blank\" href=\"https://dx.doi.org/10.1617/s11527-024-02522-8\">⟨10.1617/s11527-024-02522-8⟩</a>", "citationFull_s":"M. Taleb, D. Bulteel, A. Montagne, F. Roudet, S. Rémond, et al.. Influence of thermo-hygrometric conditions on the interface bond in 3D printed concrete. Materials and structures, 2024, 57 (235), <a target=\"_blank\" href=\"https://dx.doi.org/10.1617/s11527-024-02522-8\">⟨10.1617/s11527-024-02522-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-04790064v1\">⟨hal-04790064⟩</a>", "title_s":["Influence of thermo-hygrometric conditions on the interface bond in 3D printed concrete","Influence des conditions thermo-hygrométriques sur la liaison interfaciale dans le béton imprimé en 3D"], "authFullName_s":["M. Taleb","D. Bulteel","A. Montagne","F. Roudet","S. Rémond","Didier Chicot"], "halId_s":"hal-04790064", "docType_s":"ART", "producedDateY_i":2024 },{ "citationRef_s":"Experimental Mechanics, 2024, <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11340-024-01048-y\">⟨10.1007/s11340-024-01048-y⟩</a>", "citationFull_s":"Didier Chicot, A. Montagne, A. Mejias, F. Roudet, T. Coorevits. Improvement in Calibration Procedure in Nanoindentation: An Indenter Bluntness Indicator. Experimental Mechanics, 2024, <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11340-024-01048-y\">⟨10.1007/s11340-024-01048-y⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-04486607v1\">⟨hal-04486607⟩</a>", "title_s":["Improvement in Calibration Procedure in Nanoindentation: An Indenter Bluntness Indicator"], "authFullName_s":["Didier Chicot","A. Montagne","A. Mejias","F. Roudet","T. Coorevits"], "halId_s":"hal-04486607", "docType_s":"ART", "producedDateY_i":2024 },{ "citationRef_s":"3D Printing and Additive Manufacturing, 2023, 10 (2), pp.318-329. <a target=\"_blank\" href=\"https://dx.doi.org/10.1089/3dp.2021.0128\">⟨10.1089/3dp.2021.0128⟩</a>", "citationFull_s":"Maria Taleb, D. Bulteel, Damien Betrancourt, Francine Roudet, Sébastien Rémond, et al.. Interfacial Weakness Criterion by Indentation in 3D Printed Concrete. 3D Printing and Additive Manufacturing, 2023, 10 (2), pp.318-329. <a target=\"_blank\" href=\"https://dx.doi.org/10.1089/3dp.2021.0128\">⟨10.1089/3dp.2021.0128⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03659272v1\">⟨hal-03659272⟩</a>", "title_s":["Interfacial Weakness Criterion by Indentation in 3D Printed Concrete"], "authFullName_s":["Maria Taleb","D. Bulteel","Damien Betrancourt","Francine Roudet","Sébastien Rémond","Didier Chicot"], "halId_s":"hal-03659272", "docType_s":"ART", "producedDateY_i":2023 },{ "citationRef_s":"Materials and structures, 2023, 56 (1), pp.1-16. <a target=\"_blank\" href=\"https://dx.doi.org/10.1617/s11527-023-02114-y\">⟨10.1617/s11527-023-02114-y⟩</a>", "citationFull_s":"M. Taleb, D. Bulteel, Damien Betrancourt, Francine Roudet, S. Rémond, et al.. Multi-scale mechanical characterization of the interface in 3D printed concrete. Materials and structures, 2023, 56 (1), pp.1-16. <a target=\"_blank\" href=\"https://dx.doi.org/10.1617/s11527-023-02114-y\">⟨10.1617/s11527-023-02114-y⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03962200v1\">⟨hal-03962200⟩</a>", "title_s":["Multi-scale mechanical characterization of the interface in 3D printed concrete"], "authFullName_s":["M. Taleb","D. Bulteel","Damien Betrancourt","Francine Roudet","S. Rémond","A. Montagne","Didier Chicot"], "halId_s":"hal-03962200", "docType_s":"ART", "producedDateY_i":2023 },{ "citationRef_s":"Thin Solid Films, 2023, pp.139712. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2023.139712\">⟨10.1016/j.tsf.2023.139712⟩</a>", "citationFull_s":"Ayyoub Dziri, Alex Montagne, Francine Roudet, Katir Ziouche, Didier Chicot. Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation. Thin Solid Films, 2023, pp.139712. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2023.139712\">⟨10.1016/j.tsf.2023.139712⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03951065v1\">⟨hal-03951065⟩</a>", "title_s":["Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation"], "authFullName_s":["Ayyoub Dziri","Alex Montagne","Francine Roudet","Katir Ziouche","Didier Chicot"], "halId_s":"hal-03951065", "docType_s":"ART", "producedDateY_i":2023 },{ "citationRef_s":"Engineering Fracture Mechanics, 2022, pp.108796. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.engfracmech.2022.108796\">⟨10.1016/j.engfracmech.2022.108796⟩</a>", "citationFull_s":"A. Bouali, S. Grairia, D. Nettour, Y. Chrait, N. Arabi, et al.. Instrumented indentation based methods to assess fracture toughness (KIC) of self-compacting concrete: Influence of water to binder (w/b) ratio and type of concrete. Engineering Fracture Mechanics, 2022, pp.108796. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.engfracmech.2022.108796\">⟨10.1016/j.engfracmech.2022.108796⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03788221v1\">⟨hal-03788221⟩</a>", "title_s":["Instrumented indentation based methods to assess fracture toughness (KIC) of self-compacting concrete: Influence of water to binder (w/b) ratio and type of concrete"], "authFullName_s":["A. Bouali","S. Grairia","D. Nettour","Y. Chrait","N. Arabi","A. Montagne","A. Iost","Didier Chicot"], "halId_s":"hal-03788221", "docType_s":"ART", "producedDateY_i":2022 },{ "citationRef_s":"Journal of Materials Research, 2022, <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/s43578-022-00668-1\">⟨10.1557/s43578-022-00668-1⟩</a>", "citationFull_s":"Didier Chicot, Alberto Mejias, Francine Roudet, A. Montagne, Damien Betrancourt, et al.. Self-calibration in compliance and indenter tip defect for instrumented indentation. Journal of Materials Research, 2022, <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/s43578-022-00668-1\">⟨10.1557/s43578-022-00668-1⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03748331v1\">⟨hal-03748331⟩</a>", "title_s":["Self-calibration in compliance and indenter tip defect for instrumented indentation"], "authFullName_s":["Didier Chicot","Alberto Mejias","Francine Roudet","A. Montagne","Damien Betrancourt","T. Coorevits"], "halId_s":"hal-03748331", "docType_s":"ART", "producedDateY_i":2022 },{ "citationRef_s":"Surface and Coatings Technology, 2022, pp.128812. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2022.128812\">⟨10.1016/j.surfcoat.2022.128812⟩</a>", "citationFull_s":"Siyang Lu, Francine Roudet, A. Montagne, T. Coorevits, G. Guilbert, et al.. Vickers hardness of NiW coating as a potential replacement for Cr-VI: A methodology to consider size effect and tip defect in classical microindentation. Surface and Coatings Technology, 2022, pp.128812. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2022.128812\">⟨10.1016/j.surfcoat.2022.128812⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03760562v1\">⟨hal-03760562⟩</a>", "title_s":["Vickers hardness of NiW coating as a potential replacement for Cr-VI: A methodology to consider size effect and tip defect in classical microindentation"], "authFullName_s":["Siyang Lu","Francine Roudet","A. Montagne","T. Coorevits","G. Guilbert","A. Mouftiez","Damien Betrancourt","Didier Chicot"], "halId_s":"hal-03760562", "docType_s":"ART", "producedDateY_i":2022 },{ "citationRef_s":"Journal of the Indian Chemical Society, 2022, 99 (1), pp.100307. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jics.2021.100307\">⟨10.1016/j.jics.2021.100307⟩</a>", "citationFull_s":"Sofia Benamirouche, Abderrezak Abdi, Larbi Hemmouche, Alberto Mejias, Mohamed El Amine Belouchrani, et al.. Multiscale study of cold-rolling deformation on mechanical and corrosion behaviors of AA2024-T4 aluminum alloy. Journal of the Indian Chemical Society, 2022, 99 (1), pp.100307. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jics.2021.100307\">⟨10.1016/j.jics.2021.100307⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577548v1\">⟨hal-03577548⟩</a>", "title_s":["Multiscale study of cold-rolling deformation on mechanical and corrosion behaviors of AA2024-T4 aluminum alloy"], "authFullName_s":["Sofia Benamirouche","Abderrezak Abdi","Larbi Hemmouche","Alberto Mejias","Mohamed El Amine Belouchrani","Didier Chicot","Abdelwaheb Amrouche","Mohamed Trari"], "halId_s":"hal-03577548", "docType_s":"ART", "producedDateY_i":2022 },{ "citationRef_s":"Journal of Materials Engineering and Performance, 2022, 31 (1), pp.801-813. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11665-021-06230-0\">⟨10.1007/s11665-021-06230-0⟩</a>", "citationFull_s":"Geovana Drumond, Bianca Pinheiro, Ilson Pasqualino, Francine Roudet, Didier Chicot. Fatigue Life Prediction of Steel Pipelines Based on X-ray Diffraction Analyses. Journal of Materials Engineering and Performance, 2022, 31 (1), pp.801-813. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11665-021-06230-0\">⟨10.1007/s11665-021-06230-0⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577544v1\">⟨hal-03577544⟩</a>", "title_s":["Fatigue Life Prediction of Steel Pipelines Based on X-ray Diffraction Analyses"], "authFullName_s":["Geovana Drumond","Bianca Pinheiro","Ilson Pasqualino","Francine Roudet","Didier Chicot"], "halId_s":"hal-03577544", "docType_s":"ART", "producedDateY_i":2022 },{ "citationRef_s":"Ceramics International, 2021, 47 (18), pp.26168-26177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2021.06.024\">⟨10.1016/j.ceramint.2021.06.024⟩</a>", "citationFull_s":"M. Bentoumi, E.H. Raouache, Z. Driss, A. Montagne, A. Iost, et al.. Multicyclic indentation on brittle glasses. Ceramics International, 2021, 47 (18), pp.26168-26177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2021.06.024\">⟨10.1016/j.ceramint.2021.06.024⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577543v1\">⟨hal-03577543⟩</a>", "title_s":["Multicyclic indentation on brittle glasses"], "authFullName_s":["M. Bentoumi","E.H. Raouache","Z. Driss","A. Montagne","A. Iost","A. Mejias","Didier Chicot"], "halId_s":"hal-03577543", "docType_s":"ART", "producedDateY_i":2021 },{ "citationRef_s":"Journal of Materials Research, 2021, 36 (15), pp.3074-3085. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/s43578-021-00286-3\">⟨10.1557/s43578-021-00286-3⟩</a>", "citationFull_s":"S. Habibi, Didier Chicot, A. Mejias, B. Boutabout, E. Zareb, et al.. The P–h2 relationship on load–displacement curve considering pile-up deformation mode in instrumented indentation. Journal of Materials Research, 2021, 36 (15), pp.3074-3085. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/s43578-021-00286-3\">⟨10.1557/s43578-021-00286-3⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577538v1\">⟨hal-03577538⟩</a>", "title_s":["The P–h2 relationship on load–displacement curve considering pile-up deformation mode in instrumented indentation"], "authFullName_s":["S. Habibi","Didier Chicot","A. Mejias","B. Boutabout","E. Zareb","D. Semsoum","S. Benaissa","A. Mezough","H. Merzouk"], "halId_s":"hal-03577538", "docType_s":"ART", "producedDateY_i":2021 },{ "citationRef_s":"Newest Updates in Physical Science Research Vol. 14, Book Publisher International (a part of SCIENCEDOMAIN International), pp.154-165, 2021, <a target=\"_blank\" href=\"https://dx.doi.org/10.9734/bpi/nupsr/v14/10327D\">⟨10.9734/bpi/nupsr/v14/10327D⟩</a>", "citationFull_s":"Younès Benarioua, Bogdan Wendler, Didier Chicot. Study on Conversion Treatment of Thin Titanium Layer Deposited onto Carbon Steel: Application of Physical and Mechanical Investigation. Newest Updates in Physical Science Research Vol. 14, Book Publisher International (a part of SCIENCEDOMAIN International), pp.154-165, 2021, <a target=\"_blank\" href=\"https://dx.doi.org/10.9734/bpi/nupsr/v14/10327D\">⟨10.9734/bpi/nupsr/v14/10327D⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577554v1\">⟨hal-03577554⟩</a>", "title_s":["Study on Conversion Treatment of Thin Titanium Layer Deposited onto Carbon Steel: Application of Physical and Mechanical Investigation"], "authFullName_s":["Younès Benarioua","Bogdan Wendler","Didier Chicot"], "halId_s":"hal-03577554", "docType_s":"COUV", "producedDateY_i":2021 },{ "citationRef_s":"Journal of Applied Polymer Science, 2021, 138 (29), pp.50697. <a target=\"_blank\" href=\"https://dx.doi.org/10.1002/app.50697\">⟨10.1002/app.50697⟩</a>", "citationFull_s":"Zahraa Bouyahia, Ahmed Mdarhri, Anass Benayad, Christian Brosseau, Ilham Elaboudi, et al.. Analyzing the nanoindentation response of carbon black filled elastomers. Journal of Applied Polymer Science, 2021, 138 (29), pp.50697. <a target=\"_blank\" href=\"https://dx.doi.org/10.1002/app.50697\">⟨10.1002/app.50697⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03251023v1\">⟨hal-03251023⟩</a>", "title_s":["Analyzing the nanoindentation response of carbon black filled elastomers"], "authFullName_s":["Zahraa Bouyahia","Ahmed Mdarhri","Anass Benayad","Christian Brosseau","Ilham Elaboudi","Didier Chicot","Alain Iost","Delong He","Jinbo Bai"], "halId_s":"hal-03251023", "docType_s":"ART", "producedDateY_i":2021 },{ "citationRef_s":"Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/1.4047203\">⟨10.1115/1.4047203⟩</a>", "citationFull_s":"Geovana Drumond, Francine Roudet, Didier Chicot, Bianca Pinheiro, Ilson Pasqualino. A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements. Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/1.4047203\">⟨10.1115/1.4047203⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577553v1\">⟨hal-03577553⟩</a>", "title_s":["A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements"], "authFullName_s":["Geovana Drumond","Francine Roudet","Didier Chicot","Bianca Pinheiro","Ilson Pasqualino"], "halId_s":"hal-03577553", "docType_s":"ART", "producedDateY_i":2021 },{ "citationRef_s":"Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/1.4047203\">⟨10.1115/1.4047203⟩</a>", "citationFull_s":"G. Drumond, Francine Roudet, Didier Chicot, B. Pinheiro, I. Pasqualino. A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements. Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/1.4047203\">⟨10.1115/1.4047203⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03256541v1\">⟨hal-03256541⟩</a>", "title_s":["A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements"], "authFullName_s":["G. Drumond","Francine Roudet","Didier Chicot","B. Pinheiro","I. Pasqualino"], "halId_s":"hal-03256541", "docType_s":"ART", "producedDateY_i":2021 },{ "citationRef_s":"Ceramics International, 2020, 46 (12), pp.19843-19851. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2020.05.039\">⟨10.1016/j.ceramint.2020.05.039⟩</a>", "citationFull_s":"G. Ben Ghorbal, Arnaud Tricoteaux, A. Thuault, H. Ageorges, F. Roudet, et al.. Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation. Ceramics International, 2020, 46 (12), pp.19843-19851. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2020.05.039\">⟨10.1016/j.ceramint.2020.05.039⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577563v1\">⟨hal-03577563⟩</a>", "title_s":["Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation"], "authFullName_s":["G. Ben Ghorbal","Arnaud Tricoteaux","A. Thuault","H. Ageorges","F. Roudet","Didier Chicot"], "halId_s":"hal-03577563", "docType_s":"ART", "producedDateY_i":2020 },{ "citationRef_s":"Composite Interfaces , 2020, 27 (3), pp.307-326. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/09276440.2019.1626183\">⟨10.1080/09276440.2019.1626183⟩</a>", "citationFull_s":"Said Grairia, Yacine Chrait, Alex Montagne, Alberto Mejias, Alain Lost, et al.. Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests. Composite Interfaces , 2020, 27 (3), pp.307-326. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/09276440.2019.1626183\">⟨10.1080/09276440.2019.1626183⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577566v1\">⟨hal-03577566⟩</a>", "title_s":["Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests"], "authFullName_s":["Said Grairia","Yacine Chrait","Alex Montagne","Alberto Mejias","Alain Lost","Didier Chicot"], "halId_s":"hal-03577566", "docType_s":"ART", "producedDateY_i":2020 },{ "citationRef_s":"Composite Interfaces, 2020, 27 (3), pp.307-326. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/09276440.2019.1626183\">⟨10.1080/09276440.2019.1626183⟩</a>", "citationFull_s":"S. Grairia, Y. Chrait, A. Montagne, A. Mejias, A. Lost, et al.. Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests. Composite Interfaces, 2020, 27 (3), pp.307-326. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/09276440.2019.1626183\">⟨10.1080/09276440.2019.1626183⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03256454v1\">⟨hal-03256454⟩</a>", "title_s":["Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests"], "authFullName_s":["S. Grairia","Y. Chrait","A. Montagne","A. Mejias","A. Lost","Didier Chicot"], "halId_s":"hal-03256454", "docType_s":"ART", "producedDateY_i":2020 },{ "citationRef_s":"Ceramics International, 2020, 46 (12), pp.19843-19851. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2020.05.039\">⟨10.1016/j.ceramint.2020.05.039⟩</a>", "citationFull_s":"Ghailen Ben Ghorbal, Arnaud Tricoteaux, Anthony Thuault, H. Ageorges, F. Roudet, et al.. Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation. Ceramics International, 2020, 46 (12), pp.19843-19851. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ceramint.2020.05.039\">⟨10.1016/j.ceramint.2020.05.039⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02937709v1\">⟨hal-02937709⟩</a>", "title_s":["Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation"], "authFullName_s":["Ghailen Ben Ghorbal","Arnaud Tricoteaux","Anthony Thuault","H. Ageorges","F. Roudet","D. Chicot"], "halId_s":"hal-02937709", "docType_s":"ART", "producedDateY_i":2020 },{ "citationRef_s":"Acta Crystallographica Section A : Foundations and Advances [2014-..], 2019, 75 (a2), pp.e200-e200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1107/S2053273319093562\">⟨10.1107/S2053273319093562⟩</a>", "citationFull_s":"Khaled Boufala, Salim Ouhenia, Ghislain Louis, Damien Betrancourt, Didier Chicot, et al.. Structure and microstructure study of Charonia lampas lampas shell. Acta Crystallographica Section A : Foundations and Advances [2014-..], 2019, 75 (a2), pp.e200-e200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1107/S2053273319093562\">⟨10.1107/S2053273319093562⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03580179v1\">⟨hal-03580179⟩</a>", "title_s":["Structure and microstructure study of Charonia lampas lampas shell"], "authFullName_s":["Khaled Boufala","Salim Ouhenia","Ghislain Louis","Damien Betrancourt","Didier Chicot","Imad Belabbas"], "halId_s":"hal-03580179", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Journal of Materials Research, 2019, 34 (14), pp.2501-2516. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2019.203\">⟨10.1557/jmr.2019.203⟩</a>", "citationFull_s":"Thierry Coorevits, Stephania Kossman, Didier Chicot, François Hennebelle, Alex Montagne, et al.. Virtual machine concept applied to uncertainties estimation in instrumented indentation testing. Journal of Materials Research, 2019, 34 (14), pp.2501-2516. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2019.203\">⟨10.1557/jmr.2019.203⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577570v1\">⟨hal-03577570⟩</a>", "title_s":["Virtual machine concept applied to uncertainties estimation in instrumented indentation testing"], "authFullName_s":["Thierry Coorevits","Stephania Kossman","Didier Chicot","François Hennebelle","Alex Montagne","Alain Iost"], "halId_s":"hal-03577570", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Fizika Metallov i Metallovedenie / Physics of Metals and Metallography, 2019, 120 (5), pp.483-491. <a target=\"_blank\" href=\"https://dx.doi.org/10.1134/S0031918X1905003X\">⟨10.1134/S0031918X1905003X⟩</a>", "citationFull_s":"Firouz Fadaeifard, Mohamad Reza Pakmanesh, Morteza Shamanian Esfahani, Khamirul Amin Matori, Didier Chicot. Nanoindentation Analysis of Friction Stir Welded 6061-T6 Al Alloy in As-Weld and Post Weld Heat Treatment. Fizika Metallov i Metallovedenie / Physics of Metals and Metallography, 2019, 120 (5), pp.483-491. <a target=\"_blank\" href=\"https://dx.doi.org/10.1134/S0031918X1905003X\">⟨10.1134/S0031918X1905003X⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577578v1\">⟨hal-03577578⟩</a>", "title_s":["Nanoindentation Analysis of Friction Stir Welded 6061-T6 Al Alloy in As-Weld and Post Weld Heat Treatment"], "authFullName_s":["Firouz Fadaeifard","Mohamad Reza Pakmanesh","Morteza Shamanian Esfahani","Khamirul Amin Matori","Didier Chicot"], "halId_s":"hal-03577578", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Journal of Materials Science, 2019, 54 (6), pp.4647-4670. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s10853-018-3158-7\">⟨10.1007/s10853-018-3158-7⟩</a>", "citationFull_s":"Stephania Kossman, Alain Iost, Didier Chicot, David Mercier, Itziar Serrano-Muñoz, et al.. Mechanical characterization by multiscale instrumented indentation of highly heterogeneous materials for braking applications. Journal of Materials Science, 2019, 54 (6), pp.4647-4670. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s10853-018-3158-7\">⟨10.1007/s10853-018-3158-7⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577579v1\">⟨hal-03577579⟩</a>", "title_s":["Mechanical characterization by multiscale instrumented indentation of highly heterogeneous materials for braking applications"], "authFullName_s":["Stephania Kossman","Alain Iost","Didier Chicot","David Mercier","Itziar Serrano-Muñoz","Francine Roudet","Philippe Dufrénoy","Vincent Magnier","Anne-Lise Cristol"], "halId_s":"hal-03577579", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Construction and Building Materials, 2019, 199, pp.349-358. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.conbuildmat.2018.12.002\">⟨10.1016/j.conbuildmat.2018.12.002⟩</a>", "citationFull_s":"Damien Betrancourt, Didier Chicot, S. Kossman, G. Louis, Francine Roudet, et al.. Instrumented indentation study of slag in view of a better valorization. Construction and Building Materials, 2019, 199, pp.349-358. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.conbuildmat.2018.12.002\">⟨10.1016/j.conbuildmat.2018.12.002⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577581v1\">⟨hal-03577581⟩</a>", "title_s":["Instrumented indentation study of slag in view of a better valorization"], "authFullName_s":["Damien Betrancourt","Didier Chicot","S. Kossman","G. Louis","Francine Roudet","D. Bulteel"], "halId_s":"hal-03577581", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Journal of Manufacturing Processes, 2019, 37, pp.617-627. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmapro.2018.10.029\">⟨10.1016/j.jmapro.2018.10.029⟩</a>", "citationFull_s":"Mircea Vodă, Cosmin Codrean, Didier Chicot, Viorel-Aurel Şerban, Dragoş Uţu, et al.. Characterization of brazed joints by electrical resistance spot brazing with Ni-based amorphous self-flux alloys. Journal of Manufacturing Processes, 2019, 37, pp.617-627. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmapro.2018.10.029\">⟨10.1016/j.jmapro.2018.10.029⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577582v1\">⟨hal-03577582⟩</a>", "title_s":["Characterization of brazed joints by electrical resistance spot brazing with Ni-based amorphous self-flux alloys"], "authFullName_s":["Mircea Vodă","Cosmin Codrean","Didier Chicot","Viorel-Aurel Şerban","Dragoş Uţu","Emanoil Linul","Dragos Buzdugan"], "halId_s":"hal-03577582", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Journal of the mechanical behavior of biomedical materials, 2019, 89, pp.114-121. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2018.09.018\">⟨10.1016/j.jmbbm.2018.09.018⟩</a>", "citationFull_s":"K. Boufala, S. Ouhenia, G. Louis, Damien Betrancourt, Didier Chicot, et al.. Microstructure analysis and mechanical properties by instrumented indentation of Charonia Lampas Lampas shell. Journal of the mechanical behavior of biomedical materials, 2019, 89, pp.114-121. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2018.09.018\">⟨10.1016/j.jmbbm.2018.09.018⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577585v1\">⟨hal-03577585⟩</a>", "title_s":["Microstructure analysis and mechanical properties by instrumented indentation of Charonia Lampas Lampas shell"], "authFullName_s":["K. Boufala","S. Ouhenia","G. Louis","Damien Betrancourt","Didier Chicot","I. Belabbas"], "halId_s":"hal-03577585", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Optical Engineering, 2019, 58 (3), pp.034102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1117/1.OE.58.3.034102\">⟨10.1117/1.OE.58.3.034102⟩</a>", "citationFull_s":"Mohamed Bentoumi, Ahmed Mdarhri, Habib Benzaama, Alain Iost, Didier Chicot. Contribution of interferometry to Vickers indentation toughness determination of glass and ceramic glass. Optical Engineering, 2019, 58 (3), pp.034102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1117/1.OE.58.3.034102\">⟨10.1117/1.OE.58.3.034102⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02554750v1\">⟨hal-02554750⟩</a>", "title_s":["Contribution of interferometry to Vickers indentation toughness determination of glass and ceramic glass"], "authFullName_s":["Mohamed Bentoumi","Ahmed Mdarhri","Habib Benzaama","Alain Iost","Didier Chicot"], "halId_s":"hal-02554750", "docType_s":"ART", "producedDateY_i":2019 },{ "citationRef_s":"Materials Research Express, 2018, 5 (12), pp.125010. <a target=\"_blank\" href=\"https://dx.doi.org/10.1088/2053-1591/aadeb2\">⟨10.1088/2053-1591/aadeb2⟩</a>", "citationFull_s":"Jonathan Almirón, Hermann Alcazar, Rossibel Churata, Francine Roudet, Katir Ziouche, et al.. Effect of impregnation solutions on the synthesis of Ni-Cu/Al 2 O 3 catalyst to obtain carbon nanofibers. Materials Research Express, 2018, 5 (12), pp.125010. <a target=\"_blank\" href=\"https://dx.doi.org/10.1088/2053-1591/aadeb2\">⟨10.1088/2053-1591/aadeb2⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577588v1\">⟨hal-03577588⟩</a>", "title_s":["Effect of impregnation solutions on the synthesis of Ni-Cu/Al 2 O 3 catalyst to obtain carbon nanofibers"], "authFullName_s":["Jonathan Almirón","Hermann Alcazar","Rossibel Churata","Francine Roudet","Katir Ziouche","Didier Chicot"], "halId_s":"hal-03577588", "docType_s":"ART", "producedDateY_i":2018 },{ "citationRef_s":"Journal of Materials and Environmental Science , 2018, 9 (1), pp.189-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.26872/jmes.2018.9.1.22\">⟨10.26872/jmes.2018.9.1.22⟩</a>", "citationFull_s":"S. Graira, Y. Chrait, A. Montagne, Didier Chicot, A. Lost. Interfacial Indentation Test for the Study of Reinforcement bar/concrete matrix Adhesion i n High Performance Self Compacting Concretes. Journal of Materials and Environmental Science , 2018, 9 (1), pp.189-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.26872/jmes.2018.9.1.22\">⟨10.26872/jmes.2018.9.1.22⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577591v1\">⟨hal-03577591⟩</a>", "title_s":["Interfacial Indentation Test for the Study of Reinforcement bar/concrete matrix Adhesion i n High Performance Self Compacting Concretes"], "authFullName_s":["S. Graira","Y. Chrait","A. Montagne","Didier Chicot","A. Lost"], "halId_s":"hal-03577591", "docType_s":"ART", "producedDateY_i":2018 },{ "citationRef_s":"Surface and Coatings Technology, 2018, 334, pp.410-419. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2017.11.011\">⟨10.1016/j.surfcoat.2017.11.011⟩</a>", "citationFull_s":"A. Mejias, Didier Chicot, A. Pertuz, A. Iost, A. Montagne, et al.. Hardness evaluation from a bilayer coating system of Ni-P deposited on carbon steel plates by multicycle indentation tests. Surface and Coatings Technology, 2018, 334, pp.410-419. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2017.11.011\">⟨10.1016/j.surfcoat.2017.11.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577593v1\">⟨hal-03577593⟩</a>", "title_s":["Hardness evaluation from a bilayer coating system of Ni-P deposited on carbon steel plates by multicycle indentation tests"], "authFullName_s":["A. Mejias","Didier Chicot","A. Pertuz","A. Iost","A. Montagne","P. Cadenas"], "halId_s":"hal-03577593", "docType_s":"ART", "producedDateY_i":2018 },{ "citationRef_s":"Volume 4: Materials Technology, 2018, Madrid, Spain. pp.V004T03A025, <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/omae2018-78752\">⟨10.1115/omae2018-78752⟩</a>", "citationFull_s":"Geovana Drumond, Bianca Pinheiro, Ilson Pasqualino, Francine Roudet, Didier Chicot. High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads: Part II. Volume 4: Materials Technology, 2018, Madrid, Spain. pp.V004T03A025, <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/omae2018-78752\">⟨10.1115/omae2018-78752⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03254175v1\">⟨hal-03254175⟩</a>", "title_s":["High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads: Part II"], "authFullName_s":["Geovana Drumond","Bianca Pinheiro","Ilson Pasqualino","Francine Roudet","Didier Chicot"], "halId_s":"hal-03254175", "docType_s":"COMM", "producedDateY_i":2018 },{ "citationRef_s":"Matériaux et Techniques, 2018, 106 (2), pp.202. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2018026\">⟨10.1051/mattech/2018026⟩</a>", "citationFull_s":"Norbert Kazamer, Stephania Kossman, István Baranyi, Didier Chicot, Viorel-Aurel Serban, et al.. Effet de l’addition de TiB2 sur les propriétés mécaniques et tribologiques de revêtements NiCrBSi déposés par projection thermique. Matériaux et Techniques, 2018, 106 (2), pp.202. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2018026\">⟨10.1051/mattech/2018026⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02554760v1\">⟨hal-02554760⟩</a>", "title_s":["Effet de l’addition de TiB2 sur les propriétés mécaniques et tribologiques de revêtements NiCrBSi déposés par projection thermique"], "authFullName_s":["Norbert Kazamer","Stephania Kossman","István Baranyi","Didier Chicot","Viorel-Aurel Serban","Zoltán Rajnai","Mircea Voda"], "halId_s":"hal-02554760", "docType_s":"ART", "producedDateY_i":2018 },{ "citationRef_s":"8 RIPT, SPCTS, Dec 2017, Limoges, France", "citationFull_s":"Pablo Carpio, Rolando Candidato, Lech Pawlowski, P. Chagnon, D. Chicot. Effects of solution concentration and spraying parameters on TBCs obtained by SPPS process. 8 RIPT, SPCTS, Dec 2017, Limoges, France. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-01887579v1\">⟨hal-01887579⟩</a>", "title_s":["Effects of solution concentration and spraying parameters on TBCs obtained by SPPS process"], "authFullName_s":["Pablo Carpio","Rolando Candidato","Lech Pawlowski","P. Chagnon","D. Chicot"], "halId_s":"hal-01887579", "docType_s":"COMM", "producedDateY_i":2017 },{ "citationRef_s":"Surface Modification Technologies, Jul 2017, Mons, Belgium. pp.1-7", "citationFull_s":"Y.Y. Santana, M.V. Gutiérrez, Mariana Staia, J.G. La Barbera-Sosa, Eli Saúl Puchi-Cabrera, et al.. Sliding wear resistance of thermal sprayed wc-12co coatings reinforced with carbon nanotubes. Surface Modification Technologies, Jul 2017, Mons, Belgium. pp.1-7. <a target=\"_blank\" href=\"https://hal.science/hal-03169289v1\">⟨hal-03169289⟩</a>", "title_s":["Sliding wear resistance of thermal sprayed wc-12co coatings reinforced with carbon nanotubes"], "authFullName_s":["Y.Y. Santana","M.V. Gutiérrez","Mariana Staia","J.G. La Barbera-Sosa","Eli Saúl Puchi-Cabrera","Alain Iost","Didier Chicot"], "halId_s":"hal-03169289", "docType_s":"COMM", "producedDateY_i":2017 },{ "citationRef_s":"Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11661-017-4108-8\">⟨10.1007/s11661-017-4108-8⟩</a>", "citationFull_s":"Djahida Sidane, Hafit Khireddine, Fatima Bir, Sabeha Yala, Alex Montagne, et al.. Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application. Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11661-017-4108-8\">⟨10.1007/s11661-017-4108-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577597v1\">⟨hal-03577597⟩</a>", "title_s":["Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application"], "authFullName_s":["Djahida Sidane","Hafit Khireddine","Fatima Bir","Sabeha Yala","Alex Montagne","Didier Chicot"], "halId_s":"hal-03577597", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Journal of Materials Research, 2017, 32 (12), pp.2230-2240. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2017.120\">⟨10.1557/jmr.2017.120⟩</a>", "citationFull_s":"Stephania Kossman, Thierry Coorevits, Alain Iost, Didier Chicot. A new approach of the Oliver and Pharr model to fit the unloading curve from instrumented indentation testing. Journal of Materials Research, 2017, 32 (12), pp.2230-2240. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2017.120\">⟨10.1557/jmr.2017.120⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577598v1\">⟨hal-03577598⟩</a>", "title_s":["A new approach of the Oliver and Pharr model to fit the unloading curve from instrumented indentation testing"], "authFullName_s":["Stephania Kossman","Thierry Coorevits","Alain Iost","Didier Chicot"], "halId_s":"hal-03577598", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, Jun 2017, Trondheim, France. pp.012010, <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/OMAE2017-62677\">⟨10.1115/OMAE2017-62677⟩</a>", "citationFull_s":"Geovana Drumond, Bianca Pinheiro, Ilson Pasqualino, Francine Roudet, Xavier Decoopman, et al.. High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads. ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, Jun 2017, Trondheim, France. pp.012010, <a target=\"_blank\" href=\"https://dx.doi.org/10.1115/OMAE2017-62677\">⟨10.1115/OMAE2017-62677⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03580196v1\">⟨hal-03580196⟩</a>", "title_s":["High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads"], "authFullName_s":["Geovana Drumond","Bianca Pinheiro","Ilson Pasqualino","Francine Roudet","Xavier Decoopman","Didier Chicot"], "halId_s":"hal-03580196", "docType_s":"COMM", "producedDateY_i":2017 },{ "citationRef_s":"VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, Jun 2017, Ciudad Real, Spain", "citationFull_s":"Mariana Staia, Stephania Kossman, V Contrepas, Didier Chicot, Alain Iost, et al.. Recubrimientos nanoestructurados de circonia estabilzada con itria (ysz) depositados mediante técnicas de termorrociado por plasma en suspensión. VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, Jun 2017, Ciudad Real, Spain. <a target=\"_blank\" href=\"https://hal.science/hal-03169319v1\">⟨hal-03169319⟩</a>", "title_s":["Recubrimientos nanoestructurados de circonia estabilzada con itria (ysz) depositados mediante técnicas de termorrociado por plasma en suspensión"], "authFullName_s":["Mariana Staia","Stephania Kossman","V Contrepas","Didier Chicot","Alain Iost","Adrien van Gorp"], "halId_s":"hal-03169319", "docType_s":"COMM", "producedDateY_i":2017 },{ "citationRef_s":"Journal of the European Ceramic Society, 2017, 37 (6), pp.2531-2535. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2017.02.014\">⟨10.1016/j.jeurceramsoc.2017.02.014⟩</a>", "citationFull_s":"Ghailen Ben Ghorbal, Arnaud Tricoteaux, Anthony Thuault, Ghislain Louis, Didier Chicot. Comparison of conventional Knoop and Vickers hardness of ceramic materials. Journal of the European Ceramic Society, 2017, 37 (6), pp.2531-2535. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2017.02.014\">⟨10.1016/j.jeurceramsoc.2017.02.014⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577601v1\">⟨hal-03577601⟩</a>", "title_s":["Comparison of conventional Knoop and Vickers hardness of ceramic materials"], "authFullName_s":["Ghailen Ben Ghorbal","Arnaud Tricoteaux","Anthony Thuault","Ghislain Louis","Didier Chicot"], "halId_s":"hal-03577601", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Mechanics of Materials, 2017, 108, pp.58-67. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2017.03.009\">⟨10.1016/j.mechmat.2017.03.009⟩</a>", "citationFull_s":"Ghailen Ben Ghorbal, Arnaud Tricoteaux, Anthony Thuault, Ghislain Louis, Didier Chicot. Mechanical characterization of brittle materials using instrumented indentation with Knoop indenter. Mechanics of Materials, 2017, 108, pp.58-67. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2017.03.009\">⟨10.1016/j.mechmat.2017.03.009⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577606v1\">⟨hal-03577606⟩</a>", "title_s":["Mechanical characterization of brittle materials using instrumented indentation with Knoop indenter"], "authFullName_s":["Ghailen Ben Ghorbal","Arnaud Tricoteaux","Anthony Thuault","Ghislain Louis","Didier Chicot"], "halId_s":"hal-03577606", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Materials & Design, 2017, 121, pp.345-354. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2017.02.066\">⟨10.1016/j.matdes.2017.02.066⟩</a>", "citationFull_s":"M. Yetna N'Jock, E. Camposilvan, L. Gremillard, E. Maire, D. Fabrègue, et al.. Characterization of 100Cr6 lattice structures produced by robocasting. Materials & Design, 2017, 121, pp.345-354. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2017.02.066\">⟨10.1016/j.matdes.2017.02.066⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577604v1\">⟨hal-03577604⟩</a>", "title_s":["Characterization of 100Cr6 lattice structures produced by robocasting"], "authFullName_s":["M. Yetna N'Jock","E. Camposilvan","L. Gremillard","E. Maire","D. Fabrègue","Didier Chicot","K. Tabalaiev","J. Adrien"], "halId_s":"hal-03577604", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Journal of Materials Research, 2017, 32 (8), pp.1444-1455. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2016.523\">⟨10.1557/jmr.2016.523⟩</a>", "citationFull_s":"M. Bentoumi, D. Bouzid, H. Benzaama, A. Mejias, S. Kossman, et al.. Multiscale and multicycle instrumented indentation to determine mechanical properties: Application to the BK7 crown borosilicate. Journal of Materials Research, 2017, 32 (8), pp.1444-1455. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2016.523\">⟨10.1557/jmr.2016.523⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577608v1\">⟨hal-03577608⟩</a>", "title_s":["Multiscale and multicycle instrumented indentation to determine mechanical properties: Application to the BK7 crown borosilicate"], "authFullName_s":["M. Bentoumi","D. Bouzid","H. Benzaama","A. Mejias","S. Kossman","A. Montagne","A. Iost","Didier Chicot"], "halId_s":"hal-03577608", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Materials Science and Engineering: C, 2017, 72, pp.650-658. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msec.2016.11.129\">⟨10.1016/j.msec.2016.11.129⟩</a>", "citationFull_s":"Djahida Sidane, H. Rammal, A. Beljebbar, Sophie C. Gangloff, Didier Chicot, et al.. Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings. Materials Science and Engineering: C, 2017, 72, pp.650-658. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msec.2016.11.129\">⟨10.1016/j.msec.2016.11.129⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01433854v1\">⟨hal-01433854⟩</a>", "title_s":["Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings"], "authFullName_s":["Djahida Sidane","H. Rammal","A. Beljebbar","Sophie C. Gangloff","Didier Chicot","F. Velard","Hafit Khireddine","A Montagne","Halima Kerdjoudj"], "halId_s":"hal-01433854", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Materials Science and Engineering: C, 2017, 72, pp.650-658. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msec.2016.11.129\">⟨10.1016/j.msec.2016.11.129⟩</a>", "citationFull_s":"D. Sidane, H. Rammal, A. Beljebbar, S.C. Gangloff, Didier Chicot, et al.. Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings. Materials Science and Engineering: C, 2017, 72, pp.650-658. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msec.2016.11.129\">⟨10.1016/j.msec.2016.11.129⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577609v1\">⟨hal-03577609⟩</a>", "title_s":["Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings"], "authFullName_s":["D. Sidane","H. Rammal","A. Beljebbar","S.C. Gangloff","Didier Chicot","F. Velard","H. Khireddine","A. Montagne","H. Kerdjoudj"], "halId_s":"hal-03577609", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Matériaux et Techniques, 2017, 105 (1), pp.103. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017027\">⟨10.1051/mattech/2017027⟩</a>", "citationFull_s":"P. Nogning Kamta, Didier Chicot, F. Roudet, M. Touzin, G. Louis. Fluage et relaxation par indentation d’aciers au chrome. Matériaux et Techniques, 2017, 105 (1), pp.103. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017027\">⟨10.1051/mattech/2017027⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02554770v1\">⟨hal-02554770⟩</a>", "title_s":["Fluage et relaxation par indentation d’aciers au chrome"], "authFullName_s":["P. Nogning Kamta","Didier Chicot","F. Roudet","M. Touzin","G. Louis"], "halId_s":"hal-02554770", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Matériaux et Techniques, 2017, 105 (1), pp.101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017004\">⟨10.1051/mattech/2017004⟩</a>", "citationFull_s":"Alex Montagne, Didier Chicot, Alain Iost, Éric Le Bourhis. Indentation : fondamentaux et développements. Matériaux et Techniques, 2017, 105 (1), pp.101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017004\">⟨10.1051/mattech/2017004⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02554771v2\">⟨hal-02554771v2⟩</a>", "title_s":["Indentation : fondamentaux et développements"], "authFullName_s":["Alex Montagne","Didier Chicot","Alain Iost","Éric Le Bourhis"], "halId_s":"hal-02554771", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Matériaux et Techniques, 2017, 105 (1), pp.104. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017007\">⟨10.1051/mattech/2017007⟩</a>", "citationFull_s":"Stephania Kossman, Didier Chicot, Alain Iost. Indentation instrumentée multi-échelles appliquée à l’étude des matériaux massifs métalliques. Matériaux et Techniques, 2017, 105 (1), pp.104. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2017007\">⟨10.1051/mattech/2017007⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-02917809v1\">⟨hal-02917809⟩</a>", "title_s":["Indentation instrumentée multi-échelles appliquée à l’étude des matériaux massifs métalliques"], "authFullName_s":["Stephania Kossman","Didier Chicot","Alain Iost"], "halId_s":"hal-02917809", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11661-017-4108-8\">⟨10.1007/s11661-017-4108-8⟩</a>", "citationFull_s":"Djahida Sidane, Hafit Khireddine, Fatima Bir, Sabeha Yala, Alex Montagne, et al.. Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application. Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11661-017-4108-8\">⟨10.1007/s11661-017-4108-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01565674v1\">⟨hal-01565674⟩</a>", "title_s":["Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application"], "authFullName_s":["Djahida Sidane","Hafit Khireddine","Fatima Bir","Sabeha Yala","Alex Montagne","Didier Chicot"], "halId_s":"hal-01565674", "docType_s":"ART", "producedDateY_i":2017 },{ "citationRef_s":"Indentation 2016, Oct 2016, Lille, France", "citationFull_s":"Stéphania Kossmann, Didier Chicot, Alain Iost. Caracterisation par indentation multi-echelles de materiaux massifs et de garniture de frein. Indentation 2016, Oct 2016, Lille, France. <a target=\"_blank\" href=\"https://hal.science/hal-01564976v1\">⟨hal-01564976⟩</a>", "title_s":["Caracterisation par indentation multi-echelles de materiaux massifs et de garniture de frein"], "authFullName_s":["Stéphania Kossmann","Didier Chicot","Alain Iost"], "halId_s":"hal-01564976", "docType_s":"COMM", "producedDateY_i":2016 },{ "citationRef_s":"Indentation 2016, Oct 2016, Lille, France", "citationFull_s":"Stéphania Kossmann, Thierry Coorevits, Didier Chicot, Alain Iost. Modelisation de la courbe de decharge en indentation instrumentee. Indentation 2016, Oct 2016, Lille, France. <a target=\"_blank\" href=\"https://hal.science/hal-01564980v1\">⟨hal-01564980⟩</a>", "title_s":["Modelisation de la courbe de decharge en indentation instrumentee"], "authFullName_s":["Stéphania Kossmann","Thierry Coorevits","Didier Chicot","Alain Iost"], "halId_s":"hal-01564980", "docType_s":"COMM", "producedDateY_i":2016 },{ "citationRef_s":"XXXI International Conference on Surface Modification Technologies, Jul 2016, Mons, Belgium", "citationFull_s":"G Ben Ghorbal, A Tricoteaux, A Thuault, G Louis, Didier Chicot. STUDY OF THE INFLUENCE OF THE ELASTIC RECOVERY DURING CONVENTIONAL KNOOP INDENTATION TESTS ON CERAMICS. XXXI International Conference on Surface Modification Technologies, Jul 2016, Mons, Belgium. <a target=\"_blank\" href=\"https://hal.science/hal-03580213v1\">⟨hal-03580213⟩</a>", "title_s":["STUDY OF THE INFLUENCE OF THE ELASTIC RECOVERY DURING CONVENTIONAL KNOOP INDENTATION TESTS ON CERAMICS"], "authFullName_s":["G Ben Ghorbal","A Tricoteaux","A Thuault","G Louis","Didier Chicot"], "halId_s":"hal-03580213", "docType_s":"COMM", "producedDateY_i":2016 },{ "citationRef_s":"Surface and Coatings Technology, 2016, 298, pp.93-102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2016.04.028\">⟨10.1016/j.surfcoat.2016.04.028⟩</a>", "citationFull_s":"Alberto Mejias, Rolando Candidato, Lech Pawłowski, Didier Chicot. Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect. Surface and Coatings Technology, 2016, 298, pp.93-102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2016.04.028\">⟨10.1016/j.surfcoat.2016.04.028⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577614v1\">⟨hal-03577614⟩</a>", "title_s":["Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect"], "authFullName_s":["Alberto Mejias","Rolando Candidato","Lech Pawłowski","Didier Chicot"], "halId_s":"hal-03577614", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Surface and Coatings Technology, 2016, 298, pp.93-102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2016.04.028\">⟨10.1016/j.surfcoat.2016.04.028⟩</a>", "citationFull_s":"Alberto Mejias, Rolando T. Candidato Jr, Lech Pawlowski, Didier Chicot. Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect. Surface and Coatings Technology, 2016, 298, pp.93-102. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2016.04.028\">⟨10.1016/j.surfcoat.2016.04.028⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01318814v1\">⟨hal-01318814⟩</a>", "title_s":["Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect"], "authFullName_s":["Alberto Mejias","Rolando T. Candidato Jr","Lech Pawlowski","Didier Chicot"], "halId_s":"hal-01318814", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"ITSC 2016, May 2016, Shangai, China", "citationFull_s":"Paweł Sokołowski, A. Mejias, D. Chicot, Lech Pawlowski. The evaluation of mechanical properties of suspension plasma sprayed zirconia coatings having various microstructures. ITSC 2016, May 2016, Shangai, China. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-01848500v1\">⟨hal-01848500⟩</a>", "title_s":["The evaluation of mechanical properties of suspension plasma sprayed zirconia coatings having various microstructures"], "authFullName_s":["Paweł Sokołowski","A. Mejias","D. Chicot","Lech Pawlowski"], "halId_s":"hal-01848500", "docType_s":"COMM", "producedDateY_i":2016 },{ "citationRef_s":"Materials Science and Engineering: A, 2016, 662, pp.268-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2016.03.067\">⟨10.1016/j.msea.2016.03.067⟩</a>", "citationFull_s":"Younes Benarioua, Francine Roudet, Didier Chicot. Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films. Materials Science and Engineering: A, 2016, 662, pp.268-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2016.03.067\">⟨10.1016/j.msea.2016.03.067⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01303472v1\">⟨hal-01303472⟩</a>", "title_s":["Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films"], "authFullName_s":["Younes Benarioua","Francine Roudet","Didier Chicot"], "halId_s":"hal-01303472", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Materials Science and Engineering: A, 2016, 662, pp.268-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2016.03.067\">⟨10.1016/j.msea.2016.03.067⟩</a>", "citationFull_s":"Y. Benarioua, F. Roudet, Didier Chicot. Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films. Materials Science and Engineering: A, 2016, 662, pp.268-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2016.03.067\">⟨10.1016/j.msea.2016.03.067⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577617v1\">⟨hal-03577617⟩</a>", "title_s":["Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films"], "authFullName_s":["Y. Benarioua","F. Roudet","Didier Chicot"], "halId_s":"hal-03577617", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Mechanics of Materials, 2016, 94, pp.170-179. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2015.12.003\">⟨10.1016/j.mechmat.2015.12.003⟩</a>", "citationFull_s":"M. Yetna N'Jock, F. Roudet, M. Idriss, O. Bartier, Didier Chicot. Work-of-indentation coupled to contact stiffness for calculating elastic modulus by instrumented indentation. Mechanics of Materials, 2016, 94, pp.170-179. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2015.12.003\">⟨10.1016/j.mechmat.2015.12.003⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577620v1\">⟨hal-03577620⟩</a>", "title_s":["Work-of-indentation coupled to contact stiffness for calculating elastic modulus by instrumented indentation"], "authFullName_s":["M. Yetna N'Jock","F. Roudet","M. Idriss","O. Bartier","Didier Chicot"], "halId_s":"hal-03577620", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Surface Engineering, 2016, 32 (3), pp.194-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/02670844.2015.1116802\">⟨10.1080/02670844.2015.1116802⟩</a>", "citationFull_s":"Y. Benarioua, A. Mejias, F. Roudet, A. Iost, Didier Chicot. Hardness-load modelling applied to multilayer galvanised coatings. Surface Engineering, 2016, 32 (3), pp.194-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/02670844.2015.1116802\">⟨10.1080/02670844.2015.1116802⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577635v1\">⟨hal-03577635⟩</a>", "title_s":["Hardness-load modelling applied to multilayer galvanised coatings"], "authFullName_s":["Y. Benarioua","A. Mejias","F. Roudet","A. Iost","Didier Chicot"], "halId_s":"hal-03577635", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Materials Science and Engineering: A, 2016, 652, pp.315-324. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2015.11.098\">⟨10.1016/j.msea.2015.11.098⟩</a>", "citationFull_s":"Philemon Nogning Kamta, Alberto Mejias, Francine Roudet, Ghislain Louis, M. Touzin, et al.. Indentation creep analysis of T22 and T91 chromium based steels. Materials Science and Engineering: A, 2016, 652, pp.315-324. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2015.11.098\">⟨10.1016/j.msea.2015.11.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01246127v1\">⟨hal-01246127⟩</a>", "title_s":["Indentation creep analysis of T22 and T91 chromium based steels"], "authFullName_s":["Philemon Nogning Kamta","Alberto Mejias","Francine Roudet","Ghislain Louis","M. Touzin","Didier Chicot"], "halId_s":"hal-01246127", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Surface Engineering, 2016, 32 (3), pp.194-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/02670844.2015.1116802\">⟨10.1080/02670844.2015.1116802⟩</a>", "citationFull_s":"Younes Benarioua, Alberto Mejias, Francine Roudet, Alain Iost, Didier Chicot. Hardness-load modelling applied to multilayer galvanised coatings. Surface Engineering, 2016, 32 (3), pp.194-200. <a target=\"_blank\" href=\"https://dx.doi.org/10.1080/02670844.2015.1116802\">⟨10.1080/02670844.2015.1116802⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01291835v1\">⟨hal-01291835⟩</a>", "title_s":["Hardness-load modelling applied to multilayer galvanised coatings"], "authFullName_s":["Younes Benarioua","Alberto Mejias","Francine Roudet","Alain Iost","Didier Chicot"], "halId_s":"hal-01291835", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2016, 105, pp.279-290. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2015.11.030\">⟨10.1016/j.ijmecsci.2015.11.030⟩</a>", "citationFull_s":"Didier Chicot, Michel Yetna N'Jock, Francine Roudet, Xavier Decoopman, Mariana H. Staia, et al.. Some improvements for determining the hardness of homogeneous materials from the work-of-indentation. International Journal of Mechanical Sciences, 2016, 105, pp.279-290. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2015.11.030\">⟨10.1016/j.ijmecsci.2015.11.030⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01249912v1\">⟨hal-01249912⟩</a>", "title_s":["Some improvements for determining the hardness of homogeneous materials from the work-of-indentation"], "authFullName_s":["Didier Chicot","Michel Yetna N'Jock","Francine Roudet","Xavier Decoopman","Mariana H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01249912", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Materials Science and Engineering: A, 2016, 652, pp.315-324. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2015.11.098\">⟨10.1016/j.msea.2015.11.098⟩</a>", "citationFull_s":"P. Nogning Kamta, A. Mejias, F. Roudet, G. Louis, M. Touzin, et al.. Indentation creep analysis of T22 and T91 chromium based steels. Materials Science and Engineering: A, 2016, 652, pp.315-324. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2015.11.098\">⟨10.1016/j.msea.2015.11.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577623v1\">⟨hal-03577623⟩</a>", "title_s":["Indentation creep analysis of T22 and T91 chromium based steels"], "authFullName_s":["P. Nogning Kamta","A. Mejias","F. Roudet","G. Louis","M. Touzin","Didier Chicot"], "halId_s":"hal-03577623", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"International journal of thermal and environmental engineering, 2016, 11 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.5383/ijtee.11.01.007\">⟨10.5383/ijtee.11.01.007⟩</a>", "citationFull_s":"Younès Benarioua, Didier Chicot. Nature of Steel Effect on Intermetallic Compounds Obtained by Galvanization. International journal of thermal and environmental engineering, 2016, 11 (1), <a target=\"_blank\" href=\"https://dx.doi.org/10.5383/ijtee.11.01.007\">⟨10.5383/ijtee.11.01.007⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03580040v1\">⟨hal-03580040⟩</a>", "title_s":["Nature of Steel Effect on Intermetallic Compounds Obtained by Galvanization"], "authFullName_s":["Younès Benarioua","Didier Chicot"], "halId_s":"hal-03580040", "docType_s":"ART", "producedDateY_i":2016 },{ "citationRef_s":"Materials & Design, 2015, 86, pp.723-734. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2015.07.120\">⟨10.1016/j.matdes.2015.07.120⟩</a>", "citationFull_s":"Chahinez Fares, L. Hemmouche, M.A. Belouchrani, Abdelwaheb Amrouche, Didier Chicot, et al.. Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy. Materials & Design, 2015, 86, pp.723-734. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2015.07.120\">⟨10.1016/j.matdes.2015.07.120⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01206172v1\">⟨hal-01206172⟩</a>", "title_s":["Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy"], "authFullName_s":["Chahinez Fares","L. Hemmouche","M.A. Belouchrani","Abdelwaheb Amrouche","Didier Chicot","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01206172", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Materials & Design, 2015, 86, pp.723-734. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2015.07.120\">⟨10.1016/j.matdes.2015.07.120⟩</a>", "citationFull_s":"C. Fares, L. Hemmouche, M.A. Belouchrani, A. Amrouche, Didier Chicot, et al.. Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy. Materials & Design, 2015, 86, pp.723-734. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2015.07.120\">⟨10.1016/j.matdes.2015.07.120⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577638v1\">⟨hal-03577638⟩</a>", "title_s":["Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy"], "authFullName_s":["C. Fares","L. Hemmouche","M.A. Belouchrani","A. Amrouche","Didier Chicot","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577638", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Thin Solid Films, 2015, 594, pp.129-137. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.10.010\">⟨10.1016/j.tsf.2015.10.010⟩</a>", "citationFull_s":"F. Roudet, Didier Chicot, X. Decoopman, A. Iost, J. Bürgi, et al.. Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements. Thin Solid Films, 2015, 594, pp.129-137. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.10.010\">⟨10.1016/j.tsf.2015.10.010⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577650v1\">⟨hal-03577650⟩</a>", "title_s":["Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements"], "authFullName_s":["F. Roudet","Didier Chicot","X. Decoopman","A. Iost","J. Bürgi","J. Garcia-Molleja","L. Nosei","J. Feugeas"], "halId_s":"hal-03577650", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Thin Solid Films, 2015, 594 (Part A), pp.129-137. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.10.010\">⟨10.1016/j.tsf.2015.10.010⟩</a>", "citationFull_s":"Francine Roudet, Didier Chicot, Xavier Decoopman, Alain Iost, Juan Bürgi, et al.. Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements. Thin Solid Films, 2015, 594 (Part A), pp.129-137. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.10.010\">⟨10.1016/j.tsf.2015.10.010⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01264321v1\">⟨hal-01264321⟩</a>", "title_s":["Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements"], "authFullName_s":["Francine Roudet","Didier Chicot","Xavier Decoopman","Alain Iost","Juan Bürgi","Javier Garcia Molleja","L. Nosei","Jorge Feugeas"], "halId_s":"hal-01264321", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Thin Solid Films, 2015, 593, pp.71-80. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.09.037\">⟨10.1016/j.tsf.2015.09.037⟩</a>", "citationFull_s":"Djahida Sidane, Didier Chicot, Sabeha Yala, Salima Ziani, Hafit Khireddine, et al.. Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film. Thin Solid Films, 2015, 593, pp.71-80. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.09.037\">⟨10.1016/j.tsf.2015.09.037⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01211765v1\">⟨hal-01211765⟩</a>", "title_s":["Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film"], "authFullName_s":["Djahida Sidane","Didier Chicot","Sabeha Yala","Salima Ziani","Hafit Khireddine","Alain Iost","Xavier Decoopman"], "halId_s":"hal-01211765", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Thin Solid Films, 2015, 593, pp.71-80. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.09.037\">⟨10.1016/j.tsf.2015.09.037⟩</a>", "citationFull_s":"Djahida Sidane, Didier Chicot, Sabeha Yala, Salima Ziani, Hafit Khireddine, et al.. Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film. Thin Solid Films, 2015, 593, pp.71-80. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2015.09.037\">⟨10.1016/j.tsf.2015.09.037⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577652v1\">⟨hal-03577652⟩</a>", "title_s":["Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film"], "authFullName_s":["Djahida Sidane","Didier Chicot","Sabeha Yala","Salima Ziani","Hafit Khireddine","Alain Iost","Xavier Decoopman"], "halId_s":"hal-03577652", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11663-015-0397-8\">⟨10.1007/s11663-015-0397-8⟩</a>", "citationFull_s":"Djahida Sidane, Hafit Khireddine, Sabeha Yala, Salima Ziani, Fatima Bir, et al.. Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method. Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11663-015-0397-8\">⟨10.1007/s11663-015-0397-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01206292v1\">⟨hal-01206292⟩</a>", "title_s":["Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method"], "authFullName_s":["Djahida Sidane","Hafit Khireddine","Sabeha Yala","Salima Ziani","Fatima Bir","Didier Chicot"], "halId_s":"hal-01206292", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11663-015-0397-8\">⟨10.1007/s11663-015-0397-8⟩</a>", "citationFull_s":"Djahida Sidane, Hafit Khireddine, Sabeha Yala, Salima Ziani, Fatima Bir, et al.. Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method. Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11663-015-0397-8\">⟨10.1007/s11663-015-0397-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577640v1\">⟨hal-03577640⟩</a>", "title_s":["Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method"], "authFullName_s":["Djahida Sidane","Hafit Khireddine","Sabeha Yala","Salima Ziani","Fatima Bir","Didier Chicot"], "halId_s":"hal-03577640", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2015, 99, pp.143-153. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2015.04.021\">⟨10.1016/j.ijmecsci.2015.04.021⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Mirentxu Dubar, M.H. Staia, Jacky Lesage, et al.. Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions. International Journal of Mechanical Sciences, 2015, 99, pp.143-153. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2015.04.021\">⟨10.1016/j.ijmecsci.2015.04.021⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577646v1\">⟨hal-03577646⟩</a>", "title_s":["Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions"], "authFullName_s":["Eli Saúl Puchi-Cabrera","Jean-Dominique Guerin","Mirentxu Dubar","M.H. Staia","Jacky Lesage","Didier Chicot"], "halId_s":"hal-03577646", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Surface and Coatings Technology, 2015, 268, pp.173-179. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2014.04.043\">⟨10.1016/j.surfcoat.2014.04.043⟩</a>", "citationFull_s":"Didier Chicot, H. Ageorges, M. Voda, G. Louis, M.A. Ben Dhia, et al.. Hardness of thermal sprayed coatings: Relevance of the scale of measurement. Surface and Coatings Technology, 2015, 268, pp.173-179. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2014.04.043\">⟨10.1016/j.surfcoat.2014.04.043⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577653v1\">⟨hal-03577653⟩</a>", "title_s":["Hardness of thermal sprayed coatings: Relevance of the scale of measurement"], "authFullName_s":["Didier Chicot","H. Ageorges","M. Voda","G. Louis","M.A. Ben Dhia","C.C. Palacio","S. Kossman"], "halId_s":"hal-03577653", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>", "citationFull_s":"Michel Yetna N'Jock, Didier Chicot, J.M Ndjaka, Jacky Lesage, Xavier Decoopman, et al.. A criterion to identify sinking-in and piling-up in indentation of materials. International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01093128v1\">⟨hal-01093128⟩</a>", "title_s":["A criterion to identify sinking-in and piling-up in indentation of materials"], "authFullName_s":["Michel Yetna N'Jock","Didier Chicot","J.M Ndjaka","Jacky Lesage","Xavier Decoopman","Francine Roudet","Alberto Mejias"], "halId_s":"hal-01093128", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Matériaux et Techniques, 2015, 103 (6), pp.603. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015048\">⟨10.1051/mattech/2015048⟩</a>", "citationFull_s":"Michel Yetna N'Jock, Michel Yetna N’jock, Didier Chicot, Jean Marie Ndjaka, Jacky Lesage, et al.. Un critere simple d’identification du mode de déformation par indentation. Matériaux et Techniques, 2015, 103 (6), pp.603. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015048\">⟨10.1051/mattech/2015048⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03255793v1\">⟨hal-03255793⟩</a>", "title_s":["Un critere simple d’identification du mode de déformation par indentation"], "authFullName_s":["Michel Yetna N'Jock","Michel Yetna N’jock","Didier Chicot","Jean Marie Ndjaka","Jacky Lesage","Xavier Decoopman","Francine Roudet","Alberto Mejias"], "halId_s":"hal-03255793", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Journal of Materials Chemistry A, 2015, 3 (31), pp.15977-15985. <a target=\"_blank\" href=\"https://dx.doi.org/10.1039/C5TA01920F\">⟨10.1039/C5TA01920F⟩</a>", "citationFull_s":"Farid Khelifa, Sergey Ershov, Marie-Eve Druart, Youssef Habibi, Didier Chicot, et al.. A multilayer coating with optimized properties for corrosion protection of Al. Journal of Materials Chemistry A, 2015, 3 (31), pp.15977-15985. <a target=\"_blank\" href=\"https://dx.doi.org/10.1039/C5TA01920F\">⟨10.1039/C5TA01920F⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577643v1\">⟨hal-03577643⟩</a>", "title_s":["A multilayer coating with optimized properties for corrosion protection of Al"], "authFullName_s":["Farid Khelifa","Sergey Ershov","Marie-Eve Druart","Youssef Habibi","Didier Chicot","Marie-Georges Olivier","Rony Snyders","Philippe Dubois"], "halId_s":"hal-03577643", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Matériaux et Techniques, 2015, 103 (6), pp.605. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015054\">⟨10.1051/mattech/2015054⟩</a>", "citationFull_s":"Francine Roudet, Didier Chicot, Xavier Decoopman, Alain Iost, Juan Bürgi, et al.. Mechanical properties by indentation of aluminium nitride nanometric thin film. Matériaux et Techniques, 2015, 103 (6), pp.605. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015054\">⟨10.1051/mattech/2015054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01264296v1\">⟨hal-01264296⟩</a>", "title_s":["Mechanical properties by indentation of aluminium nitride nanometric thin film","Propriétés mécaniques par indentation d’un film mince nanometrique de nitrure d’aluminium"], "authFullName_s":["Francine Roudet","Didier Chicot","Xavier Decoopman","Alain Iost","Juan Bürgi","Javier Garcia Molleja","Jorge Feugeas"], "halId_s":"hal-01264296", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>", "citationFull_s":"Michel Yetna N'Jock, M. Yetna N’jock, D. Chicot, J.M. Ndjaka, J. Lesage, et al.. A criterion to identify sinking-in and piling-up in indentation of materials. International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03255744v1\">⟨hal-03255744⟩</a>", "title_s":["A criterion to identify sinking-in and piling-up in indentation of materials"], "authFullName_s":["Michel Yetna N'Jock","M. Yetna N’jock","D. Chicot","J.M. Ndjaka","J. Lesage","X. Decoopman","F. Roudet","A. Mejias"], "halId_s":"hal-03255744", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>", "citationFull_s":"M. Yetna N’jock, Didier Chicot, J.M. Ndjaka, J. Lesage, X. Decoopman, et al.. A criterion to identify sinking-in and piling-up in indentation of materials. International Journal of Mechanical Sciences, 2015, 90, pp.145-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2014.11.008\">⟨10.1016/j.ijmecsci.2014.11.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577655v1\">⟨hal-03577655⟩</a>", "title_s":["A criterion to identify sinking-in and piling-up in indentation of materials"], "authFullName_s":["M. Yetna N’jock","Didier Chicot","J.M. Ndjaka","J. Lesage","X. Decoopman","F. Roudet","A. Mejias"], "halId_s":"hal-03577655", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Matériaux et Techniques, 2015, 103 (6), pp.603. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015048\">⟨10.1051/mattech/2015048⟩</a>", "citationFull_s":"Michel Yetna N'Jock, Didier Chicot, Jean-Marie B. Ndjaka, Jacky Lesage, Xavier Decoopman, et al.. Un critere simple d’identification du mode de déformation par indentation. Matériaux et Techniques, 2015, 103 (6), pp.603. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2015048\">⟨10.1051/mattech/2015048⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01251610v1\">⟨hal-01251610⟩</a>", "title_s":["Un critere simple d’identification du mode de déformation par indentation","A simple criterion to identify the deformation mode in indentation"], "authFullName_s":["Michel Yetna N'Jock","Didier Chicot","Jean-Marie B. Ndjaka","Jacky Lesage","Xavier Decoopman","Francine Roudet","Alberto Mejias"], "halId_s":"hal-01251610", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Journal of Materials Chemistry A, 2015, 3, pp.15977-15985. <a target=\"_blank\" href=\"https://dx.doi.org/10.1039/C5TA01920F\">⟨10.1039/C5TA01920F⟩</a>", "citationFull_s":"Farid Khelifa, Sergey Ershov, Marie-Eve Druart, Youssef Habibi, Didier Chicot, et al.. A multilayer coating with optimized properties for corrosion protection of Al. Journal of Materials Chemistry A, 2015, 3, pp.15977-15985. <a target=\"_blank\" href=\"https://dx.doi.org/10.1039/C5TA01920F\">⟨10.1039/C5TA01920F⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01206270v1\">⟨hal-01206270⟩</a>", "title_s":["A multilayer coating with optimized properties for corrosion protection of Al"], "authFullName_s":["Farid Khelifa","Sergey Ershov","Marie-Eve Druart","Youssef Habibi","Didier Chicot","Marie-Georges Olivier","Rony Snyders","Philippe Dubois"], "halId_s":"hal-01206270", "docType_s":"ART", "producedDateY_i":2015 },{ "citationRef_s":"Indentation 2014, Dec 2014, Strasbourg, France. SF2M, 2015", "citationFull_s":"A Mejias, Didier Chicot, Xavier Decoopman, Alex Montagne, Francine Roudet, et al.. Multi-scale approach of the instrumented indentation technique on the fracture toughness estimation. Indentation 2014, Dec 2014, Strasbourg, France. SF2M, 2015. <a target=\"_blank\" href=\"https://hal.science/hal-01326987v1\">⟨hal-01326987⟩</a>", "title_s":["Multi-scale approach of the instrumented indentation technique on the fracture toughness estimation"], "authFullName_s":["A Mejias","Didier Chicot","Xavier Decoopman","Alex Montagne","Francine Roudet","Alain Iost"], "halId_s":"hal-01326987", "docType_s":"POSTER", "producedDateY_i":2014 },{ "citationRef_s":"Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-014-0146-6\">⟨10.1007/s11666-014-0146-6⟩</a>", "citationFull_s":"S. Kossman, Didier Chicot, X. Decoopman, A. Iost, A. van Gorp, et al.. Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating. Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-014-0146-6\">⟨10.1007/s11666-014-0146-6⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577672v1\">⟨hal-03577672⟩</a>", "title_s":["Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating"], "authFullName_s":["S. Kossman","Didier Chicot","X. Decoopman","A. Iost","A. van Gorp","E. Meillot","Eli Saúl Puchi-Cabrera","Y. Santana","M. Staia"], "halId_s":"hal-03577672", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmms.2014.07.015\">⟨10.1016/j.ijrmms.2014.07.015⟩</a>", "citationFull_s":"Annalisa Bandini, Paolo Berry, Edoardo Bemporad, Marco Sebastiani, Didier Chicot. Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale. International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmms.2014.07.015\">⟨10.1016/j.ijrmms.2014.07.015⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577670v1\">⟨hal-03577670⟩</a>", "title_s":["Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale"], "authFullName_s":["Annalisa Bandini","Paolo Berry","Edoardo Bemporad","Marco Sebastiani","Didier Chicot"], "halId_s":"hal-03577670", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Materials & Design, 2014, 62, pp.255-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2014.05.011\">⟨10.1016/j.matdes.2014.05.011⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Mirentxu Dubar, Mariana H. Staia, Jacky Lesage, et al.. Constitutive description for the design of hot-working operations of a 20MnCr5 steel grade. Materials & Design, 2014, 62, pp.255-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matdes.2014.05.011\">⟨10.1016/j.matdes.2014.05.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01009580v1\">⟨hal-01009580⟩</a>", "title_s":["Constitutive description for the design of hot-working operations of a 20MnCr5 steel grade"], "authFullName_s":["Eli Saúl Puchi-Cabrera","Jean-Dominique Guerin","Mirentxu Dubar","Mariana H. Staia","Jacky Lesage","Didier Chicot"], "halId_s":"hal-01009580", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Materials Science and Engineering: A, 2014, 605, pp.294-300. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2014.03.056\">⟨10.1016/j.msea.2014.03.056⟩</a>", "citationFull_s":"Viorel-Aurel Şerban, Cosmin Codrean, Mircea Vodă, Didier Chicot, Xavier Decoopman. Correlation between yield stress and hardness of nickel–silicon–boron-based alloys by nanoindentation. Materials Science and Engineering: A, 2014, 605, pp.294-300. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2014.03.056\">⟨10.1016/j.msea.2014.03.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577659v1\">⟨hal-03577659⟩</a>", "title_s":["Correlation between yield stress and hardness of nickel–silicon–boron-based alloys by nanoindentation"], "authFullName_s":["Viorel-Aurel Şerban","Cosmin Codrean","Mircea Vodă","Didier Chicot","Xavier Decoopman"], "halId_s":"hal-03577659", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>", "citationFull_s":"D. Chicot, Michel Yetna N'Jock, Eli Saúl Puchi-Cabrera, A. Iost, M.H. Staia, et al.. A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film. Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03255748v1\">⟨hal-03255748⟩</a>", "title_s":["A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film"], "authFullName_s":["D. Chicot","Michel Yetna N'Jock","Eli Saúl Puchi-Cabrera","A. Iost","M.H. Staia","G. Louis","G. Bouscarrat","R. Aumaitre"], "halId_s":"hal-03255748", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>", "citationFull_s":"Didier Chicot, M. Yetna N'Jock, Eli Saúl Puchi-Cabrera, A. Iost, M.H. Staia, et al.. A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film. Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577660v1\">⟨hal-03577660⟩</a>", "title_s":["A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film"], "authFullName_s":["Didier Chicot","M. Yetna N'Jock","Eli Saúl Puchi-Cabrera","A. Iost","M.H. Staia","G. Louis","G. Bouscarrat","R. Aumaitre"], "halId_s":"hal-03577660", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Surface Engineering, 2014, 30 (7), pp.498-510. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294414Y.0000000261\">⟨10.1179/1743294414Y.0000000261⟩</a>", "citationFull_s":"J. La Barbera-Sosa, Y. Santana, J. Caro, Didier Chicot, J. Lesage, et al.. Mechanical properties of WC coatings evaluated using instrumented indentation technique. Surface Engineering, 2014, 30 (7), pp.498-510. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294414Y.0000000261\">⟨10.1179/1743294414Y.0000000261⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577673v1\">⟨hal-03577673⟩</a>", "title_s":["Mechanical properties of WC coatings evaluated using instrumented indentation technique"], "authFullName_s":["J. La Barbera-Sosa","Y. Santana","J. Caro","Didier Chicot","J. Lesage","M. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577673", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Thin Solid Films, 2014, 558, pp.259-266", "citationFull_s":"D. Chicot, M. Yetna N'Jock, Eli Saúl Puchi-Cabrera, Alain Iost, M.H. Staia, et al.. A contact area function for Berkovich nanoindentation : Application to hardness determination of a TiHfCN thin ﬁlm. Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://hal.science/hal-01066329v1\">⟨hal-01066329⟩</a>", "title_s":["A contact area function for Berkovich nanoindentation : Application to hardness determination of a TiHfCN thin ﬁlm"], "authFullName_s":["D. Chicot","M. Yetna N'Jock","Eli Saúl Puchi-Cabrera","Alain Iost","M.H. Staia","G. Louis","G. Bouscarrat","R. Aumaitre"], "halId_s":"hal-01066329", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. <a target=\"_blank\" href=\"https://dx.doi.org/10.1108/SSMT-10-2013-0029\">⟨10.1108/SSMT-10-2013-0029⟩</a>", "citationFull_s":"Krystian Jankowski, Artur Wymyslowski, Didier Chicot. Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena. Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. <a target=\"_blank\" href=\"https://dx.doi.org/10.1108/SSMT-10-2013-0029\">⟨10.1108/SSMT-10-2013-0029⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577666v1\">⟨hal-03577666⟩</a>", "title_s":["Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena"], "authFullName_s":["Krystian Jankowski","Artur Wymyslowski","Didier Chicot"], "halId_s":"hal-03577666", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmms.2014.07.015\">⟨10.1016/j.ijrmms.2014.07.015⟩</a>", "citationFull_s":"Annalisa Bandini, Paolo Berry, Edoardo Bemporad, Marco Sebastiani, Didier Chicot. Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale. International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmms.2014.07.015\">⟨10.1016/j.ijrmms.2014.07.015⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01068503v1\">⟨hal-01068503⟩</a>", "title_s":["Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale"], "authFullName_s":["Annalisa Bandini","Paolo Berry","Edoardo Bemporad","Marco Sebastiani","Didier Chicot"], "halId_s":"hal-01068503", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. <a target=\"_blank\" href=\"https://dx.doi.org/10.1108/SSMT-10-2013-0029\">⟨10.1108/SSMT-10-2013-0029⟩</a>", "citationFull_s":"K. Jankowski, A. Wymyslowski, Didier Chicot. Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena. Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. <a target=\"_blank\" href=\"https://dx.doi.org/10.1108/SSMT-10-2013-0029\">⟨10.1108/SSMT-10-2013-0029⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00945968v1\">⟨hal-00945968⟩</a>", "title_s":["Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena"], "authFullName_s":["K. Jankowski","A. Wymyslowski","Didier Chicot"], "halId_s":"hal-00945968", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Surface Engineering, 2014, 30 (7), pp.498-510. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294414Y.0000000261\">⟨10.1179/1743294414Y.0000000261⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, J. Caro, Didier Chicot, Jacky Lesage, et al.. Mechanical properties of WC coatings evaluated using instrumented indentation technique. Surface Engineering, 2014, 30 (7), pp.498-510. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294414Y.0000000261\">⟨10.1179/1743294414Y.0000000261⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01009598v1\">⟨hal-01009598⟩</a>", "title_s":["Mechanical properties of WC coatings evaluated using instrumented indentation technique"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","J. Caro","Didier Chicot","Jacky Lesage","Mariana H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01009598", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Materials Science and Engineering: A, 2014, 605, pp.294-300. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2014.03.056\">⟨10.1016/j.msea.2014.03.056⟩</a>", "citationFull_s":"Viorel-Aurel Servan, Cosmin Codrean, Mircea Voda, Didier Chicot, Xavier Decoopman. Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentation. Materials Science and Engineering: A, 2014, 605, pp.294-300. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2014.03.056\">⟨10.1016/j.msea.2014.03.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00978386v1\">⟨hal-00978386⟩</a>", "title_s":["Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentation"], "authFullName_s":["Viorel-Aurel Servan","Cosmin Codrean","Mircea Voda","Didier Chicot","Xavier Decoopman"], "halId_s":"hal-00978386", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"International Journal of Plasticity, 2014, 54, pp.113-131. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijplas.2013.08.011\">⟨10.1016/j.ijplas.2013.08.011⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, Jean-Dominique Guerin, Jacky Lesage, Mirentxu Dubar, et al.. An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization. International Journal of Plasticity, 2014, 54, pp.113-131. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijplas.2013.08.011\">⟨10.1016/j.ijplas.2013.08.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00937039v1\">⟨hal-00937039⟩</a>", "title_s":["An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","Jean-Dominique Guerin","Jacky Lesage","Mirentxu Dubar","Didier Chicot"], "halId_s":"hal-00937039", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>", "citationFull_s":"Didier Chicot, Michel Yetna N'Jock, Eli Saúl Puchi-Cabrera, Alain Iost, M.H. Staia, et al.. A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film. Thin Solid Films, 2014, 558, pp.259-266. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2014.02.044\">⟨10.1016/j.tsf.2014.02.044⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00978376v1\">⟨hal-00978376⟩</a>", "title_s":["A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film"], "authFullName_s":["Didier Chicot","Michel Yetna N'Jock","Eli Saúl Puchi-Cabrera","Alain Iost","M.H. Staia","G. Louis","G. Bouscarrat","R. Aumaitre"], "halId_s":"hal-00978376", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Traitements et Matériaux, 2014, 429, pp.19-23", "citationFull_s":"Didier Chicot, Ghislain Louis. Propriétés mécaniques des couches minces par nanoindentation. Traitements et Matériaux, 2014, 429, pp.19-23. <a target=\"_blank\" href=\"https://hal.science/hal-01093297v1\">⟨hal-01093297⟩</a>", "title_s":["Propriétés mécaniques des couches minces par nanoindentation"], "authFullName_s":["Didier Chicot","Ghislain Louis"], "halId_s":"hal-01093297", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-014-0146-6\">⟨10.1007/s11666-014-0146-6⟩</a>", "citationFull_s":"S. Kossman, D. Chicot, Xavier Decoopman, Alain Iost, Adrien van Gorp, et al.. Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating. Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-014-0146-6\">⟨10.1007/s11666-014-0146-6⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01170447v1\">⟨hal-01170447⟩</a>", "title_s":["Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating"], "authFullName_s":["S. Kossman","D. Chicot","Xavier Decoopman","Alain Iost","Adrien van Gorp","Erick Meillot","Eli Saúl Puchi-Cabrera","Y.Y. y Santana","M.H. H Staia"], "halId_s":"hal-01170447", "docType_s":"ART", "producedDateY_i":2014 },{ "citationRef_s":"6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France", "citationFull_s":"D. Chicot, G. Louis, C.C. Palacio, Hélène Ageorges, M. Voda. Mechanical properties by indentation of thermal sprayed coatings: relevance of the scale of measurement. 6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-00949463v1\">⟨hal-00949463⟩</a>", "title_s":["Mechanical properties by indentation of thermal sprayed coatings: relevance of the scale of measurement"], "authFullName_s":["D. Chicot","G. Louis","C.C. Palacio","Hélène Ageorges","M. Voda"], "halId_s":"hal-00949463", "docType_s":"COMM", "producedDateY_i":2013 },{ "citationRef_s":"6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France", "citationFull_s":"C.C. Palacio, Hélène Ageorges, F. Vargas, D. Chicot, M. Voda, et al.. Drilling resistance test as a method to determine mechanical properties of Al2O3-TiO2 plasma spray coatings. 6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-00949467v1\">⟨hal-00949467⟩</a>", "title_s":["Drilling resistance test as a method to determine mechanical properties of Al2O3-TiO2 plasma spray coatings"], "authFullName_s":["C.C. Palacio","Hélène Ageorges","F. Vargas","D. Chicot","M. Voda","G. Angarita"], "halId_s":"hal-00949467", "docType_s":"COMM", "producedDateY_i":2013 },{ "citationRef_s":"6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France", "citationFull_s":"D. Chicot, G. Louis, C.C. Palacio, Hélène Ageorges, M. Voda. Mechanical properties of indentation of thermal sprayed coatings: relevance of the scale of measurement. 6èmes Rencontres Internationales sur la Projection Thermique (6th RIPT), Dec 2013, Limoges, France. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-00944497v1\">⟨hal-00944497⟩</a>", "title_s":["Mechanical properties of indentation of thermal sprayed coatings: relevance of the scale of measurement"], "authFullName_s":["D. Chicot","G. Louis","C.C. Palacio","Hélène Ageorges","M. Voda"], "halId_s":"hal-00944497", "docType_s":"COMM", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Plasticity, 2013, 51, pp.145-160. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijplas.2013.05.007\">⟨10.1016/j.ijplas.2013.05.007⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, Jean-Dominique Guerin, Jacky Lesage, Mirentxu Dubar, et al.. Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions. International Journal of Plasticity, 2013, 51, pp.145-160. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijplas.2013.05.007\">⟨10.1016/j.ijplas.2013.05.007⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00871501v1\">⟨hal-00871501⟩</a>", "title_s":["Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","Jean-Dominique Guerin","Jacky Lesage","Mirentxu Dubar","Didier Chicot"], "halId_s":"hal-00871501", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Technology, 2013, 29 (7), pp.868-876. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743284713Y.0000000213\">⟨10.1179/1743284713Y.0000000213⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, A Iost, M Staia, X Decoopman, et al.. Analysis of indentation size effect in copper and its alloys. Materials Science and Technology, 2013, 29 (7), pp.868-876. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743284713Y.0000000213\">⟨10.1179/1743284713Y.0000000213⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577691v1\">⟨hal-03577691⟩</a>", "title_s":["Analysis of indentation size effect in copper and its alloys"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","A Iost","M Staia","X Decoopman","F Roudet","G Louis"], "halId_s":"hal-03577691", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 28 (4), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294411Y.0000000016\">⟨10.1179/1743294411Y.0000000016⟩</a>", "citationFull_s":"Y Santana, J La Barbera-Sosa, A Bencomo, J Lesage, Didier Chicot, et al.. Influence of mechanical properties of tungsten carbide–cobalt thermal spray coatings on their solid particle erosion behaviour. Surface Engineering, 2013, 28 (4), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294411Y.0000000016\">⟨10.1179/1743294411Y.0000000016⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577730v1\">⟨hal-03577730⟩</a>", "title_s":["Influence of mechanical properties of tungsten carbide–cobalt thermal spray coatings on their solid particle erosion behaviour"], "authFullName_s":["Y Santana","J La Barbera-Sosa","A Bencomo","J Lesage","Didier Chicot","E Bemporad","Eli Saúl Puchi-Cabrera","M Staia"], "halId_s":"hal-03577730", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>", "citationFull_s":"L. Hemmouche, Didier Chicot, A. Amrouche, A. Iost, M.A. Belouchrani, et al.. An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques. Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577677v1\">⟨hal-03577677⟩</a>", "title_s":["An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques"], "authFullName_s":["L. Hemmouche","Didier Chicot","A. Amrouche","A. Iost","M.A. Belouchrani","X. Decoopman","G. Louis","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577677", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"VII Congreso Internacional de Materials, Oct 2013, Medellin, Colombia", "citationFull_s":"C. Palacio, T. Tabares, G. Angarita, F. Vargas, Hélène Ageorges, et al.. Estudio de las propiedades mecanicas de un recubrimiento de Al2O3-TiO2 a partir tres metodos de dedida. VII Congreso Internacional de Materials, Oct 2013, Medellin, Colombia. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-00949424v1\">⟨hal-00949424⟩</a>", "title_s":["Estudio de las propiedades mecanicas de un recubrimiento de Al2O3-TiO2 a partir tres metodos de dedida"], "authFullName_s":["C. Palacio","T. Tabares","G. Angarita","F. Vargas","Hélène Ageorges","D. Chicot","M. Voda"], "halId_s":"hal-00949424", "docType_s":"COMM", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>", "citationFull_s":"M. Yetna N’jock, Didier Chicot, X. Decoopman, J. Lesage, J.M. Ndjaka, et al.. Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent. International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577678v1\">⟨hal-03577678⟩</a>", "title_s":["Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent"], "authFullName_s":["M. Yetna N’jock","Didier Chicot","X. Decoopman","J. Lesage","J.M. Ndjaka","A. Pertuz"], "halId_s":"hal-03577678", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>", "citationFull_s":"Michel Yetna N'Jock, M. Yetna N’jock, D. Chicot, X. Decoopman, J. Lesage, et al.. Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent. International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03255753v1\">⟨hal-03255753⟩</a>", "title_s":["Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent"], "authFullName_s":["Michel Yetna N'Jock","M. Yetna N’jock","D. Chicot","X. Decoopman","J. Lesage","J.M. Ndjaka","A. Pertuz"], "halId_s":"hal-03255753", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Diamond and Related Materials, 2013, 38, pp.139-147. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2013.06.020\">⟨10.1016/j.diamond.2013.06.020⟩</a>", "citationFull_s":"M.H. Staia, Eli Saúl Puchi-Cabrera, A. Iost, E. Carrasquero, Y.Y. Santana Mendez, et al.. Sliding wear of a-C:H coatings against alumina in corrosive media. Diamond and Related Materials, 2013, 38, pp.139-147. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2013.06.020\">⟨10.1016/j.diamond.2013.06.020⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577681v1\">⟨hal-03577681⟩</a>", "title_s":["Sliding wear of a-C:H coatings against alumina in corrosive media"], "authFullName_s":["M.H. Staia","Eli Saúl Puchi-Cabrera","A. Iost","E. Carrasquero","Y.Y. Santana Mendez","J.G. La Barbera Sosa","Didier Chicot","A. van Gorp"], "halId_s":"hal-03577681", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Engineering: A, 2013, 576, pp.126-133. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.03.081\">⟨10.1016/j.msea.2013.03.081⟩</a>", "citationFull_s":"P.P. Bandyopadhyay, Didier Chicot, C.S. Kumar, X. Decoopman, J. Lesage. Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel. Materials Science and Engineering: A, 2013, 576, pp.126-133. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.03.081\">⟨10.1016/j.msea.2013.03.081⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577684v1\">⟨hal-03577684⟩</a>", "title_s":["Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel"], "authFullName_s":["P.P. Bandyopadhyay","Didier Chicot","C.S. Kumar","X. Decoopman","J. Lesage"], "halId_s":"hal-03577684", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Technology, 2013, 20 (7), pp.877-884. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708304225017427\">⟨10.1179/026708304225017427⟩</a>", "citationFull_s":"Didier Chicot, A. Pertuz, F. Roudet, M.H. Staia, J. Lesage. New developments for fracture toughness determination by Vickers indentation. Materials Science and Technology, 2013, 20 (7), pp.877-884. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708304225017427\">⟨10.1179/026708304225017427⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577798v1\">⟨hal-03577798⟩</a>", "title_s":["New developments for fracture toughness determination by Vickers indentation"], "authFullName_s":["Didier Chicot","A. Pertuz","F. Roudet","M.H. Staia","J. Lesage"], "halId_s":"hal-03577798", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 22 (5), pp.390-398. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329406X126690\">⟨10.1179/174329406X126690⟩</a>", "citationFull_s":"Didier Chicot, G. Marot, P. Araujo, N. Horny, Arnaud Tricoteaux, et al.. Effect of some thermal treatments on interface adhesion toughness of various thick thermal spray coatings. Surface Engineering, 2013, 22 (5), pp.390-398. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329406X126690\">⟨10.1179/174329406X126690⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577788v1\">⟨hal-03577788⟩</a>", "title_s":["Effect of some thermal treatments on interface adhesion toughness of various thick thermal spray coatings"], "authFullName_s":["Didier Chicot","G. Marot","P. Araujo","N. Horny","Arnaud Tricoteaux","M. Staia","J. Lesage"], "halId_s":"hal-03577788", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 21 (1), pp.35-40. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329405X30020\">⟨10.1179/174329405X30020⟩</a>", "citationFull_s":"P. Araujo, Didier Chicot, M. Staia, J. Lesage. Residual stresses and adhesion of thermal spray coatings. Surface Engineering, 2013, 21 (1), pp.35-40. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329405X30020\">⟨10.1179/174329405X30020⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577796v1\">⟨hal-03577796⟩</a>", "title_s":["Residual stresses and adhesion of thermal spray coatings"], "authFullName_s":["P. Araujo","Didier Chicot","M. Staia","J. Lesage"], "halId_s":"hal-03577796", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 23 (1), pp.32-39. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X161573\">⟨10.1179/174329407X161573⟩</a>", "citationFull_s":"Didier Chicot, F. Roudet, A. Soom, J. Lesage. Interpretation of instrumented hardness measurements on stainless steel with different surface preparations. Surface Engineering, 2013, 23 (1), pp.32-39. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X161573\">⟨10.1179/174329407X161573⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577773v1\">⟨hal-03577773⟩</a>", "title_s":["Interpretation of instrumented hardness measurements on stainless steel with different surface preparations"], "authFullName_s":["Didier Chicot","F. Roudet","A. Soom","J. Lesage"], "halId_s":"hal-03577773", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 23 (4), pp.273-278. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215140\">⟨10.1179/174329407X215140⟩</a>", "citationFull_s":"D. Mercier, Didier Chicot, X. Decoopman, J. Lesage. Eddy currents to control steel decarburising. Surface Engineering, 2013, 23 (4), pp.273-278. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215140\">⟨10.1179/174329407X215140⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577771v1\">⟨hal-03577771⟩</a>", "title_s":["Eddy currents to control steel decarburising"], "authFullName_s":["D. Mercier","Didier Chicot","X. Decoopman","J. Lesage"], "halId_s":"hal-03577771", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 15 (6), pp.447-453. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708499101516821\">⟨10.1179/026708499101516821⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot. Models for hardness and adhesion of coatings. Surface Engineering, 2013, 15 (6), pp.447-453. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708499101516821\">⟨10.1179/026708499101516821⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577819v1\">⟨hal-03577819⟩</a>", "title_s":["Models for hardness and adhesion of coatings"], "authFullName_s":["J. Lesage","Didier Chicot"], "halId_s":"hal-03577819", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 23 (4), pp.279-283. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215159\">⟨10.1179/174329407X215159⟩</a>", "citationFull_s":"M. Hadad, G. Marot, P. Démarécaux, Didier Chicot, J. Lesage, et al.. Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness. Surface Engineering, 2013, 23 (4), pp.279-283. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215159\">⟨10.1179/174329407X215159⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577772v1\">⟨hal-03577772⟩</a>", "title_s":["Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness"], "authFullName_s":["M. Hadad","G. Marot","P. Démarécaux","Didier Chicot","J. Lesage","L. Rohr","S. Siegmann"], "halId_s":"hal-03577772", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface Engineering, 2013, 25 (2), pp.93-96. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708408X336355\">⟨10.1179/026708408X336355⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, L. Nosei, J. Feugeas. Prediction of hardness–depth profile from indentations at surface of materials. Surface Engineering, 2013, 25 (2), pp.93-96. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708408X336355\">⟨10.1179/026708408X336355⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577759v1\">⟨hal-03577759⟩</a>", "title_s":["Prediction of hardness–depth profile from indentations at surface of materials"], "authFullName_s":["J. Lesage","Didier Chicot","L. Nosei","J. Feugeas"], "halId_s":"hal-03577759", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 227, pp.70-74. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.005\">⟨10.1016/j.surfcoat.2013.04.005⟩</a>", "citationFull_s":"Younes Benarioua, Jacky Lesage, Didier Chicot, Michel Moisan. Structure and hardness of diamond films deposited on WC–Co by CVD technique. Surface and Coatings Technology, 2013, 227, pp.70-74. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.005\">⟨10.1016/j.surfcoat.2013.04.005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577686v1\">⟨hal-03577686⟩</a>", "title_s":["Structure and hardness of diamond films deposited on WC–Co by CVD technique"], "authFullName_s":["Younes Benarioua","Jacky Lesage","Didier Chicot","Michel Moisan"], "halId_s":"hal-03577686", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 227, pp.65-69. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.006\">⟨10.1016/j.surfcoat.2013.04.006⟩</a>", "citationFull_s":"Younes Benarioua, Rabeh Boubaaya, Jacky Lesage, Didier Chicot. Annealing study of thin chromium layers on cemented steel substrates. Surface and Coatings Technology, 2013, 227, pp.65-69. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.006\">⟨10.1016/j.surfcoat.2013.04.006⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577688v1\">⟨hal-03577688⟩</a>", "title_s":["Annealing study of thin chromium layers on cemented steel substrates"], "authFullName_s":["Younes Benarioua","Rabeh Boubaaya","Jacky Lesage","Didier Chicot"], "halId_s":"hal-03577688", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Technology, 2013, 29 (7), pp.868-876", "citationFull_s":"D. Chicot, Eli Saúl Puchi-Cabrera, Alain Iost, M.H. Staia, X. Decoopman, et al.. Analysis of indentation size effect in copper and its alloys. Materials Science and Technology, 2013, 29 (7), pp.868-876. <a target=\"_blank\" href=\"https://hal.science/hal-01070182v1\">⟨hal-01070182⟩</a>", "title_s":["Analysis of indentation size effect in copper and its alloys","Analyse de l'effet de taille d'indentation dans le cuivre et ses alliages"], "authFullName_s":["D. Chicot","Eli Saúl Puchi-Cabrera","Alain Iost","M.H. Staia","X. Decoopman","F. Roudet","G. Louis"], "halId_s":"hal-01070182", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Microelectronics Reliability, 2013, 53 (5), pp.761-766. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.microrel.2013.01.008\">⟨10.1016/j.microrel.2013.01.008⟩</a>", "citationFull_s":"Didier Chicot, K. Tilkin, K. Jankowski, A. Wymysłowski. Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique. Microelectronics Reliability, 2013, 53 (5), pp.761-766. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.microrel.2013.01.008\">⟨10.1016/j.microrel.2013.01.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577706v1\">⟨hal-03577706⟩</a>", "title_s":["Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique"], "authFullName_s":["Didier Chicot","K. Tilkin","K. Jankowski","A. Wymysłowski"], "halId_s":"hal-03577706", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, C. Villalobos-Gutierrez, D. Chicot, J. Lesage, et al.. Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying. Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01174230v1\">⟨hal-01174230⟩</a>", "title_s":["Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","C. Villalobos-Gutierrez","D. Chicot","J. Lesage","X. Decoopman","A. Iost","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01174230", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.225-231", "citationFull_s":"M.H. Staia, Maribel Suarez, D. Chicot, J. Lesage, Alain Iost, et al.. Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement. Surface and Coatings Technology, 2013, 220, pp.225-231. <a target=\"_blank\" href=\"https://hal.science/hal-01070192v1\">⟨hal-01070192⟩</a>", "title_s":["Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement"], "authFullName_s":["M.H. Staia","Maribel Suarez","D. Chicot","J. Lesage","Alain Iost","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01070192", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, C. Villalobos-Gutiérrez, Didier Chicot, J. Lesage, et al.. Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying. Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577708v1\">⟨hal-03577708⟩</a>", "title_s":["Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","C. Villalobos-Gutiérrez","Didier Chicot","J. Lesage","X. Decoopman","A. Iost","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577708", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.131-139. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.025\">⟨10.1016/j.surfcoat.2012.07.025⟩</a>", "citationFull_s":"L. Łatka, Didier Chicot, A. Cattini, L. Pawłowski, A. Ambroziak. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surface and Coatings Technology, 2013, 220, pp.131-139. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.025\">⟨10.1016/j.surfcoat.2012.07.025⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577715v1\">⟨hal-03577715⟩</a>", "title_s":["Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings"], "authFullName_s":["L. Łatka","Didier Chicot","A. Cattini","L. Pawłowski","A. Ambroziak"], "halId_s":"hal-03577715", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2013.02.011\">⟨10.1016/j.jmbbm.2013.02.011⟩</a>", "citationFull_s":"A. Bandini, Didier Chicot, P. Berry, X. Decoopman, A. Pertuz, et al.. Indentation size effect of cortical bones submitted to different soft tissue removals. Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2013.02.011\">⟨10.1016/j.jmbbm.2013.02.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577717v1\">⟨hal-03577717⟩</a>", "title_s":["Indentation size effect of cortical bones submitted to different soft tissue removals"], "authFullName_s":["A. Bandini","Didier Chicot","P. Berry","X. Decoopman","A. Pertuz","D. Ojeda"], "halId_s":"hal-03577717", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.122-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.04.087\">⟨10.1016/j.surfcoat.2012.04.087⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, Y.Y. Santana, E.J. Mora-Zorrilla, J. Lesage, et al.. Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray. Surface and Coatings Technology, 2013, 220, pp.122-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.04.087\">⟨10.1016/j.surfcoat.2012.04.087⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577710v1\">⟨hal-03577710⟩</a>", "title_s":["Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","Y.Y. Santana","E.J. Mora-Zorrilla","J. Lesage","Didier Chicot","J.G. La Barbera-Sosa","E. Ochoa-Perez","C.J. Villalobos-Gutierrez"], "halId_s":"hal-03577710", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.225-231. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.043\">⟨10.1016/j.surfcoat.2012.07.043⟩</a>", "citationFull_s":"M.H. Staia, M. Suárez, Didier Chicot, J. Lesage, A. Iost, et al.. Cr2C3–NiCr VPS thermal spray coatings as candidate for chromium replacement. Surface and Coatings Technology, 2013, 220, pp.225-231. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.043\">⟨10.1016/j.surfcoat.2012.07.043⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577711v1\">⟨hal-03577711⟩</a>", "title_s":["Cr2C3–NiCr VPS thermal spray coatings as candidate for chromium replacement"], "authFullName_s":["M.H. Staia","M. Suárez","Didier Chicot","J. Lesage","A. Iost","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577711", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>", "citationFull_s":"José Gregorio La Barbera-Sosa, Y.Y. Santana, C. Villalobos-Gutierrez, D. Chicot, J. Lesage, et al.. Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying. Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01070169v1\">⟨hal-01070169⟩</a>", "title_s":["Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying"], "authFullName_s":["José Gregorio La Barbera-Sosa","Y.Y. Santana","C. Villalobos-Gutierrez","D. Chicot","J. Lesage","X. Decoopman","Alain Iost","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01070169", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-012-9874-7\">⟨10.1007/s11666-012-9874-7⟩</a>", "citationFull_s":"Leszek Łatka, Andrea Cattini, Didier Chicot, Lech Pawłowski, Stefan Kozerski, et al.. Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying. Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-012-9874-7\">⟨10.1007/s11666-012-9874-7⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577721v1\">⟨hal-03577721⟩</a>", "title_s":["Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying"], "authFullName_s":["Leszek Łatka","Andrea Cattini","Didier Chicot","Lech Pawłowski","Stefan Kozerski","Fabrice Petit","Alain Denoirjean"], "halId_s":"hal-03577721", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Diamond and Related Materials, 2013, 38, pp.139-147. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2013.06.020\">⟨10.1016/j.diamond.2013.06.020⟩</a>", "citationFull_s":"M.H. Staia, Eli Saúl Puchi-Cabrera, Alain Iost, E.J. Carrasquero, Y.Y. Santana-Mendez, et al.. Sliding wear of a-C:H coatings against alumina in corrosive media. Diamond and Related Materials, 2013, 38, pp.139-147. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2013.06.020\">⟨10.1016/j.diamond.2013.06.020⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00945903v1\">⟨hal-00945903⟩</a>", "title_s":["Sliding wear of a-C:H coatings against alumina in corrosive media"], "authFullName_s":["M.H. Staia","Eli Saúl Puchi-Cabrera","Alain Iost","E.J. Carrasquero","Y.Y. Santana-Mendez","J.G. La Barbera-Sosa","Didier Chicot","Adrien van Gorp"], "halId_s":"hal-00945903", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.225-231. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.043\">⟨10.1016/j.surfcoat.2012.07.043⟩</a>", "citationFull_s":"M.H. Staia, M. Suarez, Didier Chicot, Jacky Lesage, Alain Iost, et al.. Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement. Surface and Coatings Technology, 2013, 220, pp.225-231. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.043\">⟨10.1016/j.surfcoat.2012.07.043⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00812498v1\">⟨hal-00812498⟩</a>", "title_s":["Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement"], "authFullName_s":["M.H. Staia","M. Suarez","Didier Chicot","Jacky Lesage","Alain Iost","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00812498", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"New Journal of Glass and Ceramics, 2013, 03 (01), pp.16-28. <a target=\"_blank\" href=\"https://dx.doi.org/10.4236/njgc.2013.31004\">⟨10.4236/njgc.2013.31004⟩</a>", "citationFull_s":"Didier Chicot, Arnaud Tricoteaux, J. Lesage, Anne Leriche, Michel Descamps, et al.. Mechanical Properties of Porosity-Free Beta Tricalcium Phosphate (β-TCP) Ceramic by Sharp and Spherical Indentations. New Journal of Glass and Ceramics, 2013, 03 (01), pp.16-28. <a target=\"_blank\" href=\"https://dx.doi.org/10.4236/njgc.2013.31004\">⟨10.4236/njgc.2013.31004⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586273v1\">⟨hal-03586273⟩</a>", "title_s":["Mechanical Properties of Porosity-Free Beta Tricalcium Phosphate (β-TCP) Ceramic by Sharp and Spherical Indentations"], "authFullName_s":["Didier Chicot","Arnaud Tricoteaux","J. Lesage","Anne Leriche","Michel Descamps","E. Rguiti-Constantin"], "halId_s":"hal-03586273", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal Sustainable Construction & Design, 2013, 4 (2), pp.16-23", "citationFull_s":"Mariana Staia, Eli Saúl Puchi-Cabrera, Y.Y. Santana, J.G. La Barbera-Sosa, Alain Iost, et al.. Increase of the load carrying capacity of aluminium 2024-T3 by means of a NiP-CRC-DLC coating. International Journal Sustainable Construction & Design, 2013, 4 (2), pp.16-23. <a target=\"_blank\" href=\"https://hal.science/hal-01319243v1\">⟨hal-01319243⟩</a>", "title_s":["Increase of the load carrying capacity of aluminium 2024-T3 by means of a NiP-CRC-DLC coating"], "authFullName_s":["Mariana Staia","Eli Saúl Puchi-Cabrera","Y.Y. Santana","J.G. La Barbera-Sosa","Alain Iost","Didier Chicot","Y. Perez Delgado","P. de Baets"], "halId_s":"hal-01319243", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Microelectronics Reliability, 2013, 53 (5), pp.761-766. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.microrel.2013.01.008\">⟨10.1016/j.microrel.2013.01.008⟩</a>", "citationFull_s":"Didier Chicot, K. Tilkin, K. Jankowski, A. Wymyslowski. Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique. Microelectronics Reliability, 2013, 53 (5), pp.761-766. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.microrel.2013.01.008\">⟨10.1016/j.microrel.2013.01.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00816697v1\">⟨hal-00816697⟩</a>", "title_s":["Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique"], "authFullName_s":["Didier Chicot","K. Tilkin","K. Jankowski","A. Wymyslowski"], "halId_s":"hal-00816697", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>", "citationFull_s":"L. Hemmouche, D. Chicot, A. Amrouche, A. Iost, M.A. A Belouchrani, et al.. An analysis of the elastic properties of a porous aluminium oxide ﬁlm by means of indentation techniques. Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01065625v1\">⟨hal-01065625⟩</a>", "title_s":["An analysis of the elastic properties of a porous aluminium oxide ﬁlm by means of indentation techniques"], "authFullName_s":["L. Hemmouche","D. Chicot","A. Amrouche","A. Iost","M.A. A Belouchrani","X. Decoopman","G. Louis","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-01065625", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.122-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.04.087\">⟨10.1016/j.surfcoat.2012.04.087⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, Y.Y. Santana, E.J. Mora-Zorrilla, Jacky Lesage, et al.. Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC-10Co-4Cr cermet by HVOF thermal spray. Surface and Coatings Technology, 2013, 220, pp.122-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.04.087\">⟨10.1016/j.surfcoat.2012.04.087⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00806952v1\">⟨hal-00806952⟩</a>", "title_s":["Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC-10Co-4Cr cermet by HVOF thermal spray"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","Y.Y. Santana","E.J. Mora-Zorrilla","Jacky Lesage","Didier Chicot","J.G. La Barbera-Sosa","E.A. Ochoa-Pérez","C.J. Villalobos-Gutierrez"], "halId_s":"hal-00806952", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, C. Villalobos-Gutierrez, Didier Chicot, Jacky Lesage, et al.. Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying. Surface and Coatings Technology, 2013, 220, pp.248-256. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.05.098\">⟨10.1016/j.surfcoat.2012.05.098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00806941v1\">⟨hal-00806941⟩</a>", "title_s":["Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","C. Villalobos-Gutierrez","Didier Chicot","Jacky Lesage","Xavier Decoopman","Alain Iost","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00806941", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Refractory Metals and Hard Materials, 2013, 38, pp.102-110. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmhm.2013.01.006\">⟨10.1016/j.ijrmhm.2013.01.006⟩</a>", "citationFull_s":"Didier Chicot, P. de Baets, M.H. Staia, Eli Saúl Puchi-Cabrera, G. Louis, et al.. Influence of tip defect and indenter shape on the mechanical properties determination by indentation of a TiB2-60%B4C ceramic composite. International Journal of Refractory Metals and Hard Materials, 2013, 38, pp.102-110. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmhm.2013.01.006\">⟨10.1016/j.ijrmhm.2013.01.006⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00816692v1\">⟨hal-00816692⟩</a>", "title_s":["Influence of tip defect and indenter shape on the mechanical properties determination by indentation of a TiB2-60%B4C ceramic composite"], "authFullName_s":["Didier Chicot","P. de Baets","M.H. Staia","Eli Saúl Puchi-Cabrera","G. Louis","Y. Perez Delgado","J. Vleugels"], "halId_s":"hal-00816692", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155-170", "citationFull_s":"Xavier Decoopman, L. Nosei, Jacky Lesage, Didier Chicot, Jorge Feugeas. Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile. International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155-170. <a target=\"_blank\" href=\"https://hal.science/hal-00945890v1\">⟨hal-00945890⟩</a>", "title_s":["Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile"], "authFullName_s":["Xavier Decoopman","L. Nosei","Jacky Lesage","Didier Chicot","Jorge Feugeas"], "halId_s":"hal-00945890", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Journal of Materials Science and Technology, 2013, 29 (7), pp.868-876. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743284713Y.0000000213\">⟨10.1179/1743284713Y.0000000213⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, Alain Iost, M.H. Staia, Xavier Decoopman, et al.. Analysis of indentation size effect in copper and its alloys. Journal of Materials Science and Technology, 2013, 29 (7), pp.868-876. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743284713Y.0000000213\">⟨10.1179/1743284713Y.0000000213⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00832604v1\">⟨hal-00832604⟩</a>", "title_s":["Analysis of indentation size effect in copper and its alloys"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","Alain Iost","M.H. Staia","Xavier Decoopman","Francine Roudet","G. Louis"], "halId_s":"hal-00832604", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2013.02.011\">⟨10.1016/j.jmbbm.2013.02.011⟩</a>", "citationFull_s":"A. Bandini, Didier Chicot, P. Berry, Xavier Decoopman, A. Pertuz, et al.. Indentation size effect of cortical bones submitted to different soft tissue removals. Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jmbbm.2013.02.011\">⟨10.1016/j.jmbbm.2013.02.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00816689v1\">⟨hal-00816689⟩</a>", "title_s":["Indentation size effect of cortical bones submitted to different soft tissue removals"], "authFullName_s":["A. Bandini","Didier Chicot","P. Berry","Xavier Decoopman","A. Pertuz","D. Ojeda"], "halId_s":"hal-00816689", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Engineering: A, 2013, 576, pp.126-133. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.03.081\">⟨10.1016/j.msea.2013.03.081⟩</a>", "citationFull_s":"P.P. Bandyopadhyay, Didier Chicot, C.S. Kumar, Xavier Decoopman, Jacky Lesage. Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel. Materials Science and Engineering: A, 2013, 576, pp.126-133. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.03.081\">⟨10.1016/j.msea.2013.03.081⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00823488v1\">⟨hal-00823488⟩</a>", "title_s":["Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel"], "authFullName_s":["P.P. Bandyopadhyay","Didier Chicot","C.S. Kumar","Xavier Decoopman","Jacky Lesage"], "halId_s":"hal-00823488", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>", "citationFull_s":"Michel Yetna N'Jock, Didier Chicot, Xavier Decoopman, Jacky Lesage, J.M Ndjaka, et al.. Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent. International Journal of Mechanical Sciences, 2013, 75, pp.257-264. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijmecsci.2013.07.008\">⟨10.1016/j.ijmecsci.2013.07.008⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00857528v1\">⟨hal-00857528⟩</a>", "title_s":["Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent"], "authFullName_s":["Michel Yetna N'Jock","Didier Chicot","Xavier Decoopman","Jacky Lesage","J.M Ndjaka","Alberto Pertuz"], "halId_s":"hal-00857528", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-012-9874-7\">⟨10.1007/s11666-012-9874-7⟩</a>", "citationFull_s":"Leszek Latka, Andrea Cattini, Didier Chicot, Lech Pawlowski, Stefan Kozerski, et al.. Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying. Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/s11666-012-9874-7\">⟨10.1007/s11666-012-9874-7⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00797381v1\">⟨hal-00797381⟩</a>", "title_s":["Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying"], "authFullName_s":["Leszek Latka","Andrea Cattini","Didier Chicot","Lech Pawlowski","Stefan Kozerski","Fabrice Petit","Alain Denoirjean"], "halId_s":"hal-00797381", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 227, pp.70-74. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.005\">⟨10.1016/j.surfcoat.2013.04.005⟩</a>", "citationFull_s":"Y. Benarioua, Jacky Lesage, Didier Chicot, Michel Moisan. Structure and hardness of diamond films deposited on WC-Co by CVD technique. Surface and Coatings Technology, 2013, 227, pp.70-74. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2013.04.005\">⟨10.1016/j.surfcoat.2013.04.005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00829384v1\">⟨hal-00829384⟩</a>", "title_s":["Structure and hardness of diamond films deposited on WC-Co by CVD technique"], "authFullName_s":["Y. Benarioua","Jacky Lesage","Didier Chicot","Michel Moisan"], "halId_s":"hal-00829384", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155. <a target=\"_blank\" href=\"https://dx.doi.org/10.1504/IJMMP.2013.055381\">⟨10.1504/IJMMP.2013.055381⟩</a>", "citationFull_s":"X. Decoopman, L. Nosei, J. Lesage, Didier Chicot, J. Feugeas. Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile. International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155. <a target=\"_blank\" href=\"https://dx.doi.org/10.1504/IJMMP.2013.055381\">⟨10.1504/IJMMP.2013.055381⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577682v1\">⟨hal-03577682⟩</a>", "title_s":["Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile"], "authFullName_s":["X. Decoopman","L. Nosei","J. Lesage","Didier Chicot","J. Feugeas"], "halId_s":"hal-03577682", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>", "citationFull_s":"L. Hemmouche, Didier Chicot, Abdelwaheb Amrouche, Alain Iost, M.A. Belouchrani, et al.. An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques. Materials Science and Engineering: A, 2013, 585, pp.155-164. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2013.07.054\">⟨10.1016/j.msea.2013.07.054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00858035v1\">⟨hal-00858035⟩</a>", "title_s":["An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques"], "authFullName_s":["L. Hemmouche","Didier Chicot","Abdelwaheb Amrouche","Alain Iost","M.A. Belouchrani","Xavier Decoopman","G. Louis","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00858035", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Surface and Coatings Technology, 2013, 220, pp.131-139. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.025\">⟨10.1016/j.surfcoat.2012.07.025⟩</a>", "citationFull_s":"Leszek Latka, Didier Chicot, Andrea Cattini, Lech Pawlowski, A. Ambroziak. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surface and Coatings Technology, 2013, 220, pp.131-139. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2012.07.025\">⟨10.1016/j.surfcoat.2012.07.025⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00812487v1\">⟨hal-00812487⟩</a>", "title_s":["Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings"], "authFullName_s":["Leszek Latka","Didier Chicot","Andrea Cattini","Lech Pawlowski","A. Ambroziak"], "halId_s":"hal-00812487", "docType_s":"ART", "producedDateY_i":2013 },{ "citationRef_s":"Thin Solid Films, 2012, 522, pp.304-313. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2012.08.022\">⟨10.1016/j.tsf.2012.08.022⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, R. Aumaitre, G. Bouscarrat, C. Dublanche-Tixier, et al.. Elastic modulus of TiHfCN thin films by instrumented indentation. Thin Solid Films, 2012, 522, pp.304-313. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2012.08.022\">⟨10.1016/j.tsf.2012.08.022⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577726v1\">⟨hal-03577726⟩</a>", "title_s":["Elastic modulus of TiHfCN thin films by instrumented indentation"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","R. Aumaitre","G. Bouscarrat","C. Dublanche-Tixier","F. Roudet","M.H. Staia"], "halId_s":"hal-03577726", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"Mechanics of Materials, 2012, 53, pp.61-71. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2012.05.006\">⟨10.1016/j.mechmat.2012.05.006⟩</a>", "citationFull_s":"P.P. Bandyopadhyay, Didier Chicot, B. Venkateshwarlu, V. Racherla, X. Decoopman, et al.. Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings. Mechanics of Materials, 2012, 53, pp.61-71. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2012.05.006\">⟨10.1016/j.mechmat.2012.05.006⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577727v1\">⟨hal-03577727⟩</a>", "title_s":["Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings"], "authFullName_s":["P.P. Bandyopadhyay","Didier Chicot","B. Venkateshwarlu","V. Racherla","X. Decoopman","J. Lesage"], "halId_s":"hal-03577727", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"International Thermal Spray Conference & Exposition, May 2012, Houston, United States. pp.805-809", "citationFull_s":"Leszek Latka, Lech Pawlowski, Andrea Cattini, Alain Denoirjean, Didier Chicot, et al.. Mechanical Properties of Yttria and Ceria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying. International Thermal Spray Conference & Exposition, May 2012, Houston, United States. pp.805-809. <a target=\"_blank\" href=\"https://hal.science/hal-00782303v1\">⟨hal-00782303⟩</a>", "title_s":["Mechanical Properties of Yttria and Ceria Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying"], "authFullName_s":["Leszek Latka","Lech Pawlowski","Andrea Cattini","Alain Denoirjean","Didier Chicot","Stefan Kozerski","F. Petit"], "halId_s":"hal-00782303", "docType_s":"COMM", "producedDateY_i":2012 },{ "citationRef_s":"2012 13th Intl. Conf. on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Apr 2012, Cascais, France. pp.1/5-5/5, <a target=\"_blank\" href=\"https://dx.doi.org/10.1109/ESimE.2012.6191743\">⟨10.1109/ESimE.2012.6191743⟩</a>", "citationFull_s":"Krystian Jankowski, Artur Wymyslowski, Didier Chicot. Experimental system for analysing the combined loading and failure modes of solder joints in electronic packaging. 2012 13th Intl. Conf. on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Apr 2012, Cascais, France. pp.1/5-5/5, <a target=\"_blank\" href=\"https://dx.doi.org/10.1109/ESimE.2012.6191743\">⟨10.1109/ESimE.2012.6191743⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03588369v1\">⟨hal-03588369⟩</a>", "title_s":["Experimental system for analysing the combined loading and failure modes of solder joints in electronic packaging"], "authFullName_s":["Krystian Jankowski","Artur Wymyslowski","Didier Chicot"], "halId_s":"hal-03588369", "docType_s":"COMM", "producedDateY_i":2012 },{ "citationRef_s":"Surface Engineering, 2012, 28 (4), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294411Y.0000000016\">⟨10.1179/1743294411Y.0000000016⟩</a>", "citationFull_s":"Y.Y. Santana, J.G. La Barbera-Sosa, A. Bencomo, Jacky Lesage, Didier Chicot, et al.. Influence of mechanical properties of tungsten carbide‐cobalt thermal spray coatings on their solid particle erosion behaviour. Surface Engineering, 2012, 28 (4), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/1743294411Y.0000000016\">⟨10.1179/1743294411Y.0000000016⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00714128v1\">⟨hal-00714128⟩</a>", "title_s":["Influence of mechanical properties of tungsten carbide‐cobalt thermal spray coatings on their solid particle erosion behaviour"], "authFullName_s":["Y.Y. Santana","J.G. La Barbera-Sosa","A. Bencomo","Jacky Lesage","Didier Chicot","E. Bemporad","Eli Saúl Puchi-Cabrera","M.H. Staia"], "halId_s":"hal-00714128", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"Thermal Spray 2012: Proceedings of the International Spray Conference and Exposition (ITSC 2012), 2012, pp.805-809", "citationFull_s":"L. Latka, Lech Pawlowski, Andrea Cattini, Alain Denoirjean, D. Chicot, et al.. Mechanical properties of yttria and ceria stabilized zirconia coatings obtained by suspension plasma spraying. Thermal Spray 2012: Proceedings of the International Spray Conference and Exposition (ITSC 2012), 2012, pp.805-809. <a target=\"_blank\" href=\"https://unilim.hal.science/hal-00944026v1\">⟨hal-00944026⟩</a>", "title_s":["Mechanical properties of yttria and ceria stabilized zirconia coatings obtained by suspension plasma spraying"], "authFullName_s":["L. Latka","Lech Pawlowski","Andrea Cattini","Alain Denoirjean","D. Chicot","S. Kozerski","F. Petit"], "halId_s":"hal-00944026", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"Mechanics of Materials, 2012, 53, pp.61-71. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2012.05.006\">⟨10.1016/j.mechmat.2012.05.006⟩</a>", "citationFull_s":"P.P. Bandyopadhyay, Didier Chicot, B. Venkateshwarlu, V. Racherla, Xavier Decoopman, et al.. Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings. Mechanics of Materials, 2012, 53, pp.61-71. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2012.05.006\">⟨10.1016/j.mechmat.2012.05.006⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00714113v1\">⟨hal-00714113⟩</a>", "title_s":["Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings"], "authFullName_s":["P.P. Bandyopadhyay","Didier Chicot","B. Venkateshwarlu","V. Racherla","Xavier Decoopman","Jacky Lesage"], "halId_s":"hal-00714113", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"Thin Solid Films, 2012, 522, pp.304-313. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2012.08.022\">⟨10.1016/j.tsf.2012.08.022⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, R. Aumaitre, G. Bouscarrat, Christelle Dublanche-Tixier, et al.. Elastic modulus of TiHfCN thin films by instrumented indentation. Thin Solid Films, 2012, 522, pp.304-313. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2012.08.022\">⟨10.1016/j.tsf.2012.08.022⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00753847v1\">⟨hal-00753847⟩</a>", "title_s":["Elastic modulus of TiHfCN thin films by instrumented indentation"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","R. Aumaitre","G. Bouscarrat","Christelle Dublanche-Tixier","Francine Roudet","M.H. Staia"], "halId_s":"hal-00753847", "docType_s":"ART", "producedDateY_i":2012 },{ "citationRef_s":"Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2011.10.004\">⟨10.1016/j.diamond.2011.10.004⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, X. Decoopman, F. Roudet, J. Lesage, et al.. Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling. Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2011.10.004\">⟨10.1016/j.diamond.2011.10.004⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577731v1\">⟨hal-03577731⟩</a>", "title_s":["Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","X. Decoopman","F. Roudet","J. Lesage","M.H. Staia"], "halId_s":"hal-03577731", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2011.05.056\">⟨10.1016/j.matchemphys.2011.05.056⟩</a>", "citationFull_s":"Didier Chicot, J. Mendoza, Ali Zaoui, G. Louis, V. Lepingle, et al.. Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO·OH) by instrumented indentation and molecular dynamics analysis. Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2011.05.056\">⟨10.1016/j.matchemphys.2011.05.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577732v1\">⟨hal-03577732⟩</a>", "title_s":["Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO·OH) by instrumented indentation and molecular dynamics analysis"], "authFullName_s":["Didier Chicot","J. Mendoza","Ali Zaoui","G. Louis","V. Lepingle","F. Roudet","J. Lesage"], "halId_s":"hal-03577732", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Thin Solid Films, 2011, 519 (22), pp.7789-7795. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2011.04.228\">⟨10.1016/j.tsf.2011.04.228⟩</a>", "citationFull_s":"R. Vert, Didier Chicot, X. Decoopman, I.C. Gruescu, E. Meillot, et al.. Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique. Thin Solid Films, 2011, 519 (22), pp.7789-7795. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2011.04.228\">⟨10.1016/j.tsf.2011.04.228⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577734v1\">⟨hal-03577734⟩</a>", "title_s":["Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique"], "authFullName_s":["R. Vert","Didier Chicot","X. Decoopman","I.C. Gruescu","E. Meillot","A. Vardelle","G. Mariaux"], "halId_s":"hal-03577734", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2011.06.003\">⟨10.1016/j.msea.2011.06.003⟩</a>", "citationFull_s":"Didier Chicot, M. Voda, X. Decoopman, V.A. Serban, Eli Saúl Puchi-Cabrera, et al.. Mechanical properties of an Al91–Mn6–Nd3 nanostructured alloy. Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2011.06.003\">⟨10.1016/j.msea.2011.06.003⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577735v1\">⟨hal-03577735⟩</a>", "title_s":["Mechanical properties of an Al91–Mn6–Nd3 nanostructured alloy"], "authFullName_s":["Didier Chicot","M. Voda","X. Decoopman","V.A. Serban","Eli Saúl Puchi-Cabrera","M.H. Staia","C. Codrean"], "halId_s":"hal-03577735", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Journal of the European Ceramic Society, 2011, 31 (8), pp.1361-1369. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2011.02.005\">⟨10.1016/j.jeurceramsoc.2011.02.005⟩</a>", "citationFull_s":"Arnaud Tricoteaux, E. Rguiti, Didier Chicot, L. Boilet, Michel Descamps, et al.. Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation. Journal of the European Ceramic Society, 2011, 31 (8), pp.1361-1369. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2011.02.005\">⟨10.1016/j.jeurceramsoc.2011.02.005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577737v1\">⟨hal-03577737⟩</a>", "title_s":["Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation"], "authFullName_s":["Arnaud Tricoteaux","E. Rguiti","Didier Chicot","L. Boilet","Michel Descamps","Anne Leriche","J. Lesage"], "halId_s":"hal-03577737", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.euromechsol.2010.12.007\">⟨10.1016/j.euromechsol.2010.12.007⟩</a>", "citationFull_s":"R.R. Ambriz, Didier Chicot, N. Benseddiq, G. Mesmacque, S.D. de La Torre. Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation. European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.euromechsol.2010.12.007\">⟨10.1016/j.euromechsol.2010.12.007⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577738v1\">⟨hal-03577738⟩</a>", "title_s":["Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation"], "authFullName_s":["R.R. Ambriz","Didier Chicot","N. Benseddiq","G. Mesmacque","S.D. de La Torre"], "halId_s":"hal-03577738", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.euromechsol.2010.12.007\">⟨10.1016/j.euromechsol.2010.12.007⟩</a>", "citationFull_s":"R.R. Ambriz, Didier Chicot, Noureddine Benseddiq, Gérard Mesmacque, S.D. de La Torre. Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation. European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.euromechsol.2010.12.007\">⟨10.1016/j.euromechsol.2010.12.007⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00579951v1\">⟨hal-00579951⟩</a>", "title_s":["Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation"], "authFullName_s":["R.R. Ambriz","Didier Chicot","Noureddine Benseddiq","Gérard Mesmacque","S.D. de La Torre"], "halId_s":"hal-00579951", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2011.06.003\">⟨10.1016/j.msea.2011.06.003⟩</a>", "citationFull_s":"Didier Chicot, M. Voda, Xavier Decoopman, V.A. Serban, Eli Saúl Puchi-Cabrera, et al.. Mechanical properties of an Al91-Mn6-Nd3 nanostructured alloy. Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2011.06.003\">⟨10.1016/j.msea.2011.06.003⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00607925v1\">⟨hal-00607925⟩</a>", "title_s":["Mechanical properties of an Al91-Mn6-Nd3 nanostructured alloy"], "authFullName_s":["Didier Chicot","M. Voda","Xavier Decoopman","V.A. Serban","Eli Saúl Puchi-Cabrera","M.H. Staia","C. Codrean"], "halId_s":"hal-00607925", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2011.10.004\">⟨10.1016/j.diamond.2011.10.004⟩</a>", "citationFull_s":"Didier Chicot, Eli Saúl Puchi-Cabrera, Xavier Decoopman, Francine Roudet, Jacky Lesage, et al.. Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling. Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.diamond.2011.10.004\">⟨10.1016/j.diamond.2011.10.004⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00636698v1\">⟨hal-00636698⟩</a>", "title_s":["Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling"], "authFullName_s":["Didier Chicot","Eli Saúl Puchi-Cabrera","Xavier Decoopman","Francine Roudet","Jacky Lesage","M.H. Staia"], "halId_s":"hal-00636698", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2011.05.056\">⟨10.1016/j.matchemphys.2011.05.056⟩</a>", "citationFull_s":"Didier Chicot, Johnny Mendoza, Ali Zaoui, G. Louis, V. Lepingle, et al.. Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO*OH) by instrumented indentation and molecular dynamics analysis. Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2011.05.056\">⟨10.1016/j.matchemphys.2011.05.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00611044v1\">⟨hal-00611044⟩</a>", "title_s":["Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO*OH) by instrumented indentation and molecular dynamics analysis"], "authFullName_s":["Didier Chicot","Johnny Mendoza","Ali Zaoui","G. Louis","V. Lepingle","Francine Roudet","Jacky Lesage"], "halId_s":"hal-00611044", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Thin Solid Films, 2011, 519 (22), pp.7789-7795. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2011.04.228\">⟨10.1016/j.tsf.2011.04.228⟩</a>", "citationFull_s":"R. Vert, Didier Chicot, Xavier Decoopman, Ion-Cosmin Gruescu, E. Meillot, et al.. Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique. Thin Solid Films, 2011, 519 (22), pp.7789-7795. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2011.04.228\">⟨10.1016/j.tsf.2011.04.228⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00617858v1\">⟨hal-00617858⟩</a>", "title_s":["Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique"], "authFullName_s":["R. Vert","Didier Chicot","Xavier Decoopman","Ion-Cosmin Gruescu","E. Meillot","Armelle Vardelle","Gilles Mariaux"], "halId_s":"hal-00617858", "docType_s":"ART", "producedDateY_i":2011 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.954-960. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.06.025\">⟨10.1016/j.surfcoat.2010.06.025⟩</a>", "citationFull_s":"Leszek Łatka, Lech Pawlowski, Didier Chicot, Christel Pierlot, Fabrice Petit. Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid. Surface and Coatings Technology, 2010, 205 (4), pp.954-960. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.06.025\">⟨10.1016/j.surfcoat.2010.06.025⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577740v1\">⟨hal-03577740⟩</a>", "title_s":["Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid"], "authFullName_s":["Leszek Łatka","Lech Pawlowski","Didier Chicot","Christel Pierlot","Fabrice Petit"], "halId_s":"hal-03577740", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.01.011\">⟨10.1016/j.surfcoat.2010.01.011⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, M.J. Ortiz-Mancilla, J.G. La Barbera-Sosa, E.A. Ochoa Pérez, et al.. Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray. Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.01.011\">⟨10.1016/j.surfcoat.2010.01.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577744v1\">⟨hal-03577744⟩</a>", "title_s":["Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","M.J. Ortiz-Mancilla","J.G. La Barbera-Sosa","E.A. Ochoa Pérez","C. Villalobos-Gutiérrez","S. Bellayer","M. Traisnel","Didier Chicot","J. Lesage"], "halId_s":"hal-03577744", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.07.090\">⟨10.1016/j.surfcoat.2010.07.090⟩</a>", "citationFull_s":"R. Vert, Didier Chicot, C. Dublanche-Tixier, E. Meillot, A. Vardelle, et al.. Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates. Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.07.090\">⟨10.1016/j.surfcoat.2010.07.090⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577742v1\">⟨hal-03577742⟩</a>", "title_s":["Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates"], "authFullName_s":["R. Vert","Didier Chicot","C. Dublanche-Tixier","E. Meillot","A. Vardelle","G. Mariaux"], "halId_s":"hal-03577742", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2010.07.014\">⟨10.1016/j.msea.2010.07.014⟩</a>", "citationFull_s":"W.A. González-Hermosilla, Didier Chicot, J. Lesage, J.G. La Barbera-Sosa, I.C. Gruescu, et al.. Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray. Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2010.07.014\">⟨10.1016/j.msea.2010.07.014⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577756v1\">⟨hal-03577756⟩</a>", "title_s":["Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray"], "authFullName_s":["W.A. González-Hermosilla","Didier Chicot","J. Lesage","J.G. La Barbera-Sosa","I.C. Gruescu","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577756", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.04.036\">⟨10.1016/j.surfcoat.2010.04.036⟩</a>", "citationFull_s":"J. García Molleja, L. Nosei, J. Ferrón, E. Bemporad, J. Lesage, et al.. Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization. Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.04.036\">⟨10.1016/j.surfcoat.2010.04.036⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577746v1\">⟨hal-03577746⟩</a>", "title_s":["Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization"], "authFullName_s":["J. García Molleja","L. Nosei","J. Ferrón","E. Bemporad","J. Lesage","Didier Chicot","J. Feugeas"], "halId_s":"hal-03577746", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Thin Solid Films, 2010, 518 (19), pp.5565-5571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2010.05.063\">⟨10.1016/j.tsf.2010.05.063⟩</a>", "citationFull_s":"Didier Chicot, L. Gil, K. Silva, F. Roudet, Eli Saúl Puchi-Cabrera, et al.. Thin film hardness determination using indentation loading curve modelling. Thin Solid Films, 2010, 518 (19), pp.5565-5571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2010.05.063\">⟨10.1016/j.tsf.2010.05.063⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577748v1\">⟨hal-03577748⟩</a>", "title_s":["Thin film hardness determination using indentation loading curve modelling"], "authFullName_s":["Didier Chicot","L. Gil","K. Silva","F. Roudet","Eli Saúl Puchi-Cabrera","M.H. Staia","D.G. Teer"], "halId_s":"hal-03577748", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Thin Solid Films, 2010, 518 (8), pp.2097-2101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2009.07.178\">⟨10.1016/j.tsf.2009.07.178⟩</a>", "citationFull_s":"Gildas Guillemot, A. Iost, Didier Chicot. Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817. Thin Solid Films, 2010, 518 (8), pp.2097-2101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2009.07.178\">⟨10.1016/j.tsf.2009.07.178⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577750v1\">⟨hal-03577750⟩</a>", "title_s":["Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817"], "authFullName_s":["Gildas Guillemot","A. Iost","Didier Chicot"], "halId_s":"hal-03577750", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Mechanics of Materials, 2010, 42 (2), pp.166-174. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2009.11.016\">⟨10.1016/j.mechmat.2009.11.016⟩</a>", "citationFull_s":"Arnaud Tricoteaux, G. Duarte, Didier Chicot, Éric Le Bourhis, E. Bemporad, et al.. Depth-sensing indentation modeling for determination of Elastic modulus of thin films. Mechanics of Materials, 2010, 42 (2), pp.166-174. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2009.11.016\">⟨10.1016/j.mechmat.2009.11.016⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577752v1\">⟨hal-03577752⟩</a>", "title_s":["Depth-sensing indentation modeling for determination of Elastic modulus of thin films"], "authFullName_s":["Arnaud Tricoteaux","G. Duarte","Didier Chicot","Éric Le Bourhis","E. Bemporad","J. Lesage"], "halId_s":"hal-03577752", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Mechanics of Materials, 2010, 42 (2), pp.166-174. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2009.11.016\">⟨10.1016/j.mechmat.2009.11.016⟩</a>", "citationFull_s":"Arnaud Tricoteaux, G. Duarte, Didier Chicot, Éric Le Bourhis, E. Bemporad, et al.. Depth-sensing indentation modeling for determination of Elastic modulus of thin films. Mechanics of Materials, 2010, 42 (2), pp.166-174. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2009.11.016\">⟨10.1016/j.mechmat.2009.11.016⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00446606v1\">⟨hal-00446606⟩</a>", "title_s":["Depth-sensing indentation modeling for determination of Elastic modulus of thin films"], "authFullName_s":["Arnaud Tricoteaux","G. Duarte","Didier Chicot","Éric Le Bourhis","E. Bemporad","Jacky Lesage"], "halId_s":"hal-00446606", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2009.07.033\">⟨10.1016/j.matchemphys.2009.07.033⟩</a>", "citationFull_s":"Didier Chicot, Francine Roudet, Ali Zaoui, G. Louis, V. Lepingle. Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies. Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2009.07.033\">⟨10.1016/j.matchemphys.2009.07.033⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00429753v1\">⟨hal-00429753⟩</a>", "title_s":["Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies"], "authFullName_s":["Didier Chicot","Francine Roudet","Ali Zaoui","G. Louis","V. Lepingle"], "halId_s":"hal-00429753", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Thin Solid Films, 2010, 518 (8), pp.2097-2101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2009.07.178\">⟨10.1016/j.tsf.2009.07.178⟩</a>", "citationFull_s":"Gildas Guillemot, Alain Iost, Didier Chicot. Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817. Thin Solid Films, 2010, 518 (8), pp.2097-2101. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2009.07.178\">⟨10.1016/j.tsf.2009.07.178⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-01174483v1\">⟨hal-01174483⟩</a>", "title_s":["Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817"], "authFullName_s":["Gildas Guillemot","Alain Iost","Didier Chicot"], "halId_s":"hal-01174483", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.09.030\">⟨10.1016/j.msea.2009.09.030⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, E.A. Ochoa-Pérez, D.G. Teer, Y.Y. Santana-Mendez, et al.. Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating. Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.09.030\">⟨10.1016/j.msea.2009.09.030⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00444359v1\">⟨hal-00444359⟩</a>", "title_s":["Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","E.A. Ochoa-Pérez","D.G. Teer","Y.Y. Santana-Mendez","J.G. La Barbera-Sosa","Didier Chicot","Jacky Lesage"], "halId_s":"hal-00444359", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.01.011\">⟨10.1016/j.surfcoat.2010.01.011⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, M.J. Ortiz-Mancilla, J.G. La Barbera-Sosa, E.A. Ochoa-Pérez, et al.. Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray. Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.01.011\">⟨10.1016/j.surfcoat.2010.01.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00527716v1\">⟨hal-00527716⟩</a>", "title_s":["Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","M.J. Ortiz-Mancilla","J.G. La Barbera-Sosa","E.A. Ochoa-Pérez","C. Villalobos-Gutierrez","S. Bellayer","M. Traisnel","Didier Chicot","Jacky Lesage"], "halId_s":"hal-00527716", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Thin Solid Films, 2010, 518 (19), pp.5565-5571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2010.05.063\">⟨10.1016/j.tsf.2010.05.063⟩</a>", "citationFull_s":"Didier Chicot, L. Gil, K. Silva, Francine Roudet, Eli Saúl Puchi-Cabrera, et al.. Thin film hardness determination using indentation loading curve modelling. Thin Solid Films, 2010, 518 (19), pp.5565-5571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2010.05.063\">⟨10.1016/j.tsf.2010.05.063⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00494445v1\">⟨hal-00494445⟩</a>", "title_s":["Thin film hardness determination using indentation loading curve modelling"], "authFullName_s":["Didier Chicot","L. Gil","K. Silva","Francine Roudet","Eli Saúl Puchi-Cabrera","M.H. Staia","D.G. Teer"], "halId_s":"hal-00494445", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.07.090\">⟨10.1016/j.surfcoat.2010.07.090⟩</a>", "citationFull_s":"Romain Vert, Didier Chicot, Christelle Dublanche-Tixier, E. Meillot, Armelle Vardelle, et al.. Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates. Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.07.090\">⟨10.1016/j.surfcoat.2010.07.090⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00527707v1\">⟨hal-00527707⟩</a>", "title_s":["Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates"], "authFullName_s":["Romain Vert","Didier Chicot","Christelle Dublanche-Tixier","E. Meillot","Armelle Vardelle","Gilles Mariaux"], "halId_s":"hal-00527707", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2010.07.014\">⟨10.1016/j.msea.2010.07.014⟩</a>", "citationFull_s":"W. Gonzalez, Didier Chicot, Jacky Lesage, J.G. La Barbera-Sosa, Ion-Cosmin Gruescu, et al.. Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray. Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2010.07.014\">⟨10.1016/j.msea.2010.07.014⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00515398v1\">⟨hal-00515398⟩</a>", "title_s":["Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray"], "authFullName_s":["W. Gonzalez","Didier Chicot","Jacky Lesage","J.G. La Barbera-Sosa","Ion-Cosmin Gruescu","M.H. Staia","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00515398", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.04.036\">⟨10.1016/j.surfcoat.2010.04.036⟩</a>", "citationFull_s":"J. Garcia Molleja, L. Nosei, J. Ferron, E. Bemporad, Jacky Lesage, et al.. Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization. Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.04.036\">⟨10.1016/j.surfcoat.2010.04.036⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00494434v1\">⟨hal-00494434⟩</a>", "title_s":["Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization"], "authFullName_s":["J. Garcia Molleja","L. Nosei","J. Ferron","E. Bemporad","Jacky Lesage","Didier Chicot","Jorge Feugeas"], "halId_s":"hal-00494434", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.09.030\">⟨10.1016/j.msea.2009.09.030⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, E.A. Ochoa-Pérez, D.G. Teer, Y.Y. Santana-Méndez, et al.. Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating. Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.09.030\">⟨10.1016/j.msea.2009.09.030⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577753v1\">⟨hal-03577753⟩</a>", "title_s":["Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","E.A. Ochoa-Pérez","D.G. Teer","Y.Y. Santana-Méndez","J.G. La Barbera-Sosa","Didier Chicot","J. Lesage"], "halId_s":"hal-03577753", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2009.07.033\">⟨10.1016/j.matchemphys.2009.07.033⟩</a>", "citationFull_s":"Didier Chicot, F. Roudet, Ali Zaoui, G. Louis, V. Lepingle. Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies. Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.matchemphys.2009.07.033\">⟨10.1016/j.matchemphys.2009.07.033⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577754v1\">⟨hal-03577754⟩</a>", "title_s":["Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies"], "authFullName_s":["Didier Chicot","F. Roudet","Ali Zaoui","G. Louis","V. Lepingle"], "halId_s":"hal-03577754", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Surface and Coatings Technology, 2010, 205 (4), pp.954-960. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.06.025\">⟨10.1016/j.surfcoat.2010.06.025⟩</a>", "citationFull_s":"Leszek Latka, Lech Pawlowski, Didier Chicot, Christel Pierlot, Fabrice Petit. Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid. Surface and Coatings Technology, 2010, 205 (4), pp.954-960. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2010.06.025\">⟨10.1016/j.surfcoat.2010.06.025⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00527723v1\">⟨hal-00527723⟩</a>", "title_s":["Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid"], "authFullName_s":["Leszek Latka","Lech Pawlowski","Didier Chicot","Christel Pierlot","Fabrice Petit"], "halId_s":"hal-00527723", "docType_s":"ART", "producedDateY_i":2010 },{ "citationRef_s":"Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/J.MSEA.2009.08.058\">⟨10.1016/J.MSEA.2009.08.058⟩</a>", "citationFull_s":"Didier Chicot, G. Duarte, A Tricoteaux, Benoît Jorgowski, Anne Leriche, et al.. Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings. Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/J.MSEA.2009.08.058\">⟨10.1016/J.MSEA.2009.08.058⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577757v1\">⟨hal-03577757⟩</a>", "title_s":["Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings"], "authFullName_s":["Didier Chicot","G. Duarte","A Tricoteaux","Benoît Jorgowski","Anne Leriche","J. Lesage"], "halId_s":"hal-03577757", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Journal of Materials Research, 2009, 24 (3), pp.749-759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2009.0098\">⟨10.1557/jmr.2009.0098⟩</a>", "citationFull_s":"Didier Chicot, F. Roudet, V. Lepingle, G. Louis. Strain gradient plasticity to study hardness behavior of magnetite (Fe 3 O 4 ) under multicyclic indentation. Journal of Materials Research, 2009, 24 (3), pp.749-759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/jmr.2009.0098\">⟨10.1557/jmr.2009.0098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577758v1\">⟨hal-03577758⟩</a>", "title_s":["Strain gradient plasticity to study hardness behavior of magnetite (Fe 3 O 4 ) under multicyclic indentation"], "authFullName_s":["Didier Chicot","F. Roudet","V. Lepingle","G. Louis"], "halId_s":"hal-03577758", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2008.09.040\">⟨10.1016/j.msea.2008.09.040⟩</a>", "citationFull_s":"Didier Chicot. Hardness length-scale factor to model nano- and micro-indentation size effects. Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2008.09.040\">⟨10.1016/j.msea.2008.09.040⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00359663v1\">⟨hal-00359663⟩</a>", "title_s":["Hardness length-scale factor to model nano- and micro-indentation size effects"], "authFullName_s":["Didier Chicot"], "halId_s":"hal-00359663", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Journal of Materials Research, 2009, 24 (3), pp.749-759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/JMR.2009.0098\">⟨10.1557/JMR.2009.0098⟩</a>", "citationFull_s":"Didier Chicot, Francine Roudet, V. Lepingle, G. Louis. Strain gradient plasticity to study hardness behavior of magnetite (Fe3O4) under multicyclic indentation. Journal of Materials Research, 2009, 24 (3), pp.749-759. <a target=\"_blank\" href=\"https://dx.doi.org/10.1557/JMR.2009.0098\">⟨10.1557/JMR.2009.0098⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00376775v1\">⟨hal-00376775⟩</a>", "title_s":["Strain gradient plasticity to study hardness behavior of magnetite (Fe3O4) under multicyclic indentation"], "authFullName_s":["Didier Chicot","Francine Roudet","V. Lepingle","G. Louis"], "halId_s":"hal-00376775", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2008.09.040\">⟨10.1016/j.msea.2008.09.040⟩</a>", "citationFull_s":"Didier Chicot. Hardness length-scale factor to model nano- and micro-indentation size effects. Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2008.09.040\">⟨10.1016/j.msea.2008.09.040⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577760v1\">⟨hal-03577760⟩</a>", "title_s":["Hardness length-scale factor to model nano- and micro-indentation size effects"], "authFullName_s":["Didier Chicot"], "halId_s":"hal-03577760", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Matériaux et Techniques, 2009, 96, pp.43-52. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2009005\">⟨10.1051/mattech/2009005⟩</a>", "citationFull_s":"Francine Roudet, Johnny Mendoza, G. Duarte, Jacky Lesage, Didier Chicot. Un facteur d'échelle en dureté pour représenter l'effet de taille en nano et en micro-indentation. Matériaux et Techniques, 2009, 96, pp.43-52. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/2009005\">⟨10.1051/mattech/2009005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00643260v1\">⟨hal-00643260⟩</a>", "title_s":["Un facteur d'échelle en dureté pour représenter l'effet de taille en nano et en micro-indentation"], "authFullName_s":["Francine Roudet","Johnny Mendoza","G. Duarte","Jacky Lesage","Didier Chicot"], "halId_s":"hal-00643260", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Surface Engineering, 2009, 25 (2), pp.93-96. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708408X336355\">⟨10.1179/026708408X336355⟩</a>", "citationFull_s":"Jacky Lesage, Didier Chicot, L. Nosei, Jorge Feugeas. Prediction of hardness-depth profile from indentations at surface of materials. Surface Engineering, 2009, 25 (2), pp.93-96. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708408X336355\">⟨10.1179/026708408X336355⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00359655v1\">⟨hal-00359655⟩</a>", "title_s":["Prediction of hardness-depth profile from indentations at surface of materials"], "authFullName_s":["Jacky Lesage","Didier Chicot","L. Nosei","Jorge Feugeas"], "halId_s":"hal-00359655", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.08.058\">⟨10.1016/j.msea.2009.08.058⟩</a>", "citationFull_s":"Didier Chicot, G. Duarte, Arnaud Tricoteaux, Benoît Jorgowski, Anne Leriche, et al.. Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of Titania, Alumina and Zirconia plasma sprayed coatings. Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.msea.2009.08.058\">⟨10.1016/j.msea.2009.08.058⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00429771v1\">⟨hal-00429771⟩</a>", "title_s":["Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of Titania, Alumina and Zirconia plasma sprayed coatings"], "authFullName_s":["Didier Chicot","G. Duarte","Arnaud Tricoteaux","Benoît Jorgowski","Anne Leriche","Jacky Lesage"], "halId_s":"hal-00429771", "docType_s":"ART", "producedDateY_i":2009 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.041\">⟨10.1016/j.surfcoat.2008.04.041⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, M.H. Staia, Didier Chicot, J. Lesage, et al.. Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF. Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.041\">⟨10.1016/j.surfcoat.2008.04.041⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577766v1\">⟨hal-03577766⟩</a>", "title_s":["Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","M.H. Staia","Didier Chicot","J. Lesage","J. Caro","G. Mesmacque","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577766", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.017\">⟨10.1016/j.surfcoat.2008.04.017⟩</a>", "citationFull_s":"Z. Marcano, J. Lesage, Didier Chicot, G. Mesmacque, Eli Saúl Puchi-Cabrera, et al.. Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings. Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.017\">⟨10.1016/j.surfcoat.2008.04.017⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577763v1\">⟨hal-03577763⟩</a>", "title_s":["Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings"], "authFullName_s":["Z. Marcano","J. Lesage","Didier Chicot","G. Mesmacque","Eli Saúl Puchi-Cabrera","M.H. Staia"], "halId_s":"hal-03577763", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.044\">⟨10.1016/j.surfcoat.2008.04.044⟩</a>", "citationFull_s":"C.J. Villalobos-Gutiérrez, G.E. Gedler-Chacón, J.G. La Barbera-Sosa, A. Piñeiro, M.H. Staia, et al.. Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying. Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.044\">⟨10.1016/j.surfcoat.2008.04.044⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577762v1\">⟨hal-03577762⟩</a>", "title_s":["Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying"], "authFullName_s":["C.J. Villalobos-Gutiérrez","G.E. Gedler-Chacón","J.G. La Barbera-Sosa","A. Piñeiro","M.H. Staia","J. Lesage","Didier Chicot","G. Mesmacque","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-03577762", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.043\">⟨10.1016/j.surfcoat.2008.04.043⟩</a>", "citationFull_s":"M. Suarez, S. Bellayer, M. Traisnel, W. Gonzalez, Didier Chicot, et al.. Corrosion behavior of Cr3C2–NiCr vacuum plasma sprayed coatings. Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.043\">⟨10.1016/j.surfcoat.2008.04.043⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577761v1\">⟨hal-03577761⟩</a>", "title_s":["Corrosion behavior of Cr3C2–NiCr vacuum plasma sprayed coatings"], "authFullName_s":["M. Suarez","S. Bellayer","M. Traisnel","W. Gonzalez","Didier Chicot","J. Lesage","Eli Saúl Puchi-Cabrera","M.H. Staia"], "halId_s":"hal-03577761", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Mechanics of Materials, 2008, 40 (4-5), pp.171-182. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2007.07.002\">⟨10.1016/j.mechmat.2007.07.002⟩</a>", "citationFull_s":"Didier Chicot, D. Mercier. Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve. Mechanics of Materials, 2008, 40 (4-5), pp.171-182. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2007.07.002\">⟨10.1016/j.mechmat.2007.07.002⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577769v1\">⟨hal-03577769⟩</a>", "title_s":["Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve"], "authFullName_s":["Didier Chicot","D. Mercier"], "halId_s":"hal-03577769", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2007.12.010\">⟨10.1016/j.surfcoat.2007.12.010⟩</a>", "citationFull_s":"D. Mercier, X. Decoopman, Didier Chicot. Model to determine the depth of a diffusion layer by normal indentations to the surface. Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2007.12.010\">⟨10.1016/j.surfcoat.2007.12.010⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577767v1\">⟨hal-03577767⟩</a>", "title_s":["Model to determine the depth of a diffusion layer by normal indentations to the surface"], "authFullName_s":["D. Mercier","X. Decoopman","Didier Chicot"], "halId_s":"hal-03577767", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Thin Solid Films, 2008, 516 (8), pp.1964-1971. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2007.10.003\">⟨10.1016/j.tsf.2007.10.003⟩</a>", "citationFull_s":"Didier Chicot, E. Bemporad, G. Galtieri, F. Roudet, M. Alvisi, et al.. Analysis of data from various indentation techniques for thin films intrinsic hardness modelling. Thin Solid Films, 2008, 516 (8), pp.1964-1971. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2007.10.003\">⟨10.1016/j.tsf.2007.10.003⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577770v1\">⟨hal-03577770⟩</a>", "title_s":["Analysis of data from various indentation techniques for thin films intrinsic hardness modelling"], "authFullName_s":["Didier Chicot","E. Bemporad","G. Galtieri","F. Roudet","M. Alvisi","J. Lesage"], "halId_s":"hal-03577770", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2007.12.010\">⟨10.1016/j.surfcoat.2007.12.010⟩</a>", "citationFull_s":"David Mercier, Xavier Decoopman, Didier Chicot. Model to determine the depth of a diffusion layer by normal indentations to the surface. Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2007.12.010\">⟨10.1016/j.surfcoat.2007.12.010⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00262131v1\">⟨hal-00262131⟩</a>", "title_s":["Model to determine the depth of a diffusion layer by normal indentations to the surface"], "authFullName_s":["David Mercier","Xavier Decoopman","Didier Chicot"], "halId_s":"hal-00262131", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Mechanics of Materials, 2008, 40 (4-5), pp.171-182. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2007.07.002\">⟨10.1016/j.mechmat.2007.07.002⟩</a>", "citationFull_s":"Didier Chicot, David Mercier. Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve. Mechanics of Materials, 2008, 40 (4-5), pp.171-182. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.mechmat.2007.07.002\">⟨10.1016/j.mechmat.2007.07.002⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00204264v1\">⟨hal-00204264⟩</a>", "title_s":["Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve"], "authFullName_s":["Didier Chicot","David Mercier"], "halId_s":"hal-00204264", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.017\">⟨10.1016/j.surfcoat.2008.04.017⟩</a>", "citationFull_s":"Z. Marcano, Jacky Lesage, Didier Chicot, Gérard Mesmacque, Eli Saúl Puchi-Cabrera, et al.. Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings. Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.017\">⟨10.1016/j.surfcoat.2008.04.017⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00288559v1\">⟨hal-00288559⟩</a>", "title_s":["Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings"], "authFullName_s":["Z. Marcano","Jacky Lesage","Didier Chicot","Gérard Mesmacque","Eli Saúl Puchi-Cabrera","M.H. Staia"], "halId_s":"hal-00288559", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.041\">⟨10.1016/j.surfcoat.2008.04.041⟩</a>", "citationFull_s":"J.G. La Barbera-Sosa, Y.Y. Santana, M.H. Staia, Didier Chicot, Jacky Lesage, et al.. Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF. Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.041\">⟨10.1016/j.surfcoat.2008.04.041⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00290005v1\">⟨hal-00290005⟩</a>", "title_s":["Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF"], "authFullName_s":["J.G. La Barbera-Sosa","Y.Y. Santana","M.H. Staia","Didier Chicot","Jacky Lesage","J. Caro","Gérard Mesmacque","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00290005", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.044\">⟨10.1016/j.surfcoat.2008.04.044⟩</a>", "citationFull_s":"C.J. Villalobos-Gutierrez, G.E. Gedler-Chacon, J.G. La Barbera-Sosa, A. Pineiro, M.H. Staia, et al.. Fatigue and corrosion-fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC-10Co- 4Cr alloy deposited by HVOF thermal spraying. Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.044\">⟨10.1016/j.surfcoat.2008.04.044⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00288532v1\">⟨hal-00288532⟩</a>", "title_s":["Fatigue and corrosion-fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC-10Co- 4Cr alloy deposited by HVOF thermal spraying"], "authFullName_s":["C.J. Villalobos-Gutierrez","G.E. Gedler-Chacon","J.G. La Barbera-Sosa","A. Pineiro","M.H. Staia","Jacky Lesage","Didier Chicot","Gérard Mesmacque","Eli Saúl Puchi-Cabrera"], "halId_s":"hal-00288532", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.043\">⟨10.1016/j.surfcoat.2008.04.043⟩</a>", "citationFull_s":"M. Suarez, S. Bellayer, M. Traisnel, W. Gonzalez, Didier Chicot, et al.. Corrosion behaviour of Cr3C2 -NiCr vacuum plasma sprayed coatings. Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2008.04.043\">⟨10.1016/j.surfcoat.2008.04.043⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00288505v1\">⟨hal-00288505⟩</a>", "title_s":["Corrosion behaviour of Cr3C2 -NiCr vacuum plasma sprayed coatings"], "authFullName_s":["M. Suarez","S. Bellayer","M. Traisnel","W. Gonzalez","Didier Chicot","Jacky Lesage","Eli Saúl Puchi-Cabrera","M.H. Staia"], "halId_s":"hal-00288505", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Thin Solid Films, 2008, 516 (8), pp.1964-1971. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2007.10.003\">⟨10.1016/j.tsf.2007.10.003⟩</a>", "citationFull_s":"Didier Chicot, E. Bemporad, G. Galtieri, Francine Roudet, M. Alvisi, et al.. Analysis of data from various indentation techniques for thin films intrinsic hardness modelling. Thin Solid Films, 2008, 516 (8), pp.1964-1971. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2007.10.003\">⟨10.1016/j.tsf.2007.10.003⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00262197v1\">⟨hal-00262197⟩</a>", "title_s":["Analysis of data from various indentation techniques for thin films intrinsic hardness modelling"], "authFullName_s":["Didier Chicot","E. Bemporad","G. Galtieri","Francine Roudet","M. Alvisi","Jacky Lesage"], "halId_s":"hal-00262197", "docType_s":"ART", "producedDateY_i":2008 },{ "citationRef_s":"Surface Engineering, 2007, 23 (4), pp.279-283. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215159\">⟨10.1179/174329407X215159⟩</a>", "citationFull_s":"M. Hadad, Guillaume Marot, P. Demarecaux, Didier Chicot, Jacky Lesage, et al.. Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness. Surface Engineering, 2007, 23 (4), pp.279-283. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215159\">⟨10.1179/174329407X215159⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00185250v1\">⟨hal-00185250⟩</a>", "title_s":["Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness"], "authFullName_s":["M. Hadad","Guillaume Marot","P. Demarecaux","Didier Chicot","Jacky Lesage","J. Michler","S. Siegmann"], "halId_s":"hal-00185250", "docType_s":"ART", "producedDateY_i":2007 },{ "citationRef_s":"Surface Engineering, 2007, 23 (4), pp.273-278. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215140\">⟨10.1179/174329407X215140⟩</a>", "citationFull_s":"David Mercier, Didier Chicot, Xavier Decoopman, Jacky Lesage. Eddy currents to control steel decarburising. Surface Engineering, 2007, 23 (4), pp.273-278. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X215140\">⟨10.1179/174329407X215140⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00185229v1\">⟨hal-00185229⟩</a>", "title_s":["Eddy currents to control steel decarburising"], "authFullName_s":["David Mercier","Didier Chicot","Xavier Decoopman","Jacky Lesage"], "halId_s":"hal-00185229", "docType_s":"ART", "producedDateY_i":2007 },{ "citationRef_s":"Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2006.06.011\">⟨10.1016/j.jeurceramsoc.2006.06.011⟩</a>", "citationFull_s":"Didier Chicot, D. Mercier, F. Roudet, K. Silva, M.H. Staia, et al.. Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics. Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2006.06.011\">⟨10.1016/j.jeurceramsoc.2006.06.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577781v1\">⟨hal-03577781⟩</a>", "title_s":["Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics"], "authFullName_s":["Didier Chicot","D. Mercier","F. Roudet","K. Silva","M.H. Staia","J. Lesage"], "halId_s":"hal-03577781", "docType_s":"ART", "producedDateY_i":2007 },{ "citationRef_s":"Surface Engineering, 2007, 23 (1), pp.32-39. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X161573\">⟨10.1179/174329407X161573⟩</a>", "citationFull_s":"Didier Chicot, Francine Roudet, A. Soom, Jacky Lesage. Interpretation of instrumented hardness measurements on stainless steel with different surface preparations. Surface Engineering, 2007, 23 (1), pp.32-39. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329407X161573\">⟨10.1179/174329407X161573⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00124435v1\">⟨hal-00124435⟩</a>", "title_s":["Interpretation of instrumented hardness measurements on stainless steel with different surface preparations"], "authFullName_s":["Didier Chicot","Francine Roudet","A. Soom","Jacky Lesage"], "halId_s":"hal-00124435", "docType_s":"ART", "producedDateY_i":2007 },{ "citationRef_s":"Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2006.06.011\">⟨10.1016/j.jeurceramsoc.2006.06.011⟩</a>", "citationFull_s":"Didier Chicot, David Mercier, Francine Roudet, K. Silva, M.H. Staia, et al.. Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics. Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.jeurceramsoc.2006.06.011\">⟨10.1016/j.jeurceramsoc.2006.06.011⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00124408v1\">⟨hal-00124408⟩</a>", "title_s":["Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics"], "authFullName_s":["Didier Chicot","David Mercier","Francine Roudet","K. Silva","M.H. Staia","Jacky Lesage"], "halId_s":"hal-00124408", "docType_s":"ART", "producedDateY_i":2007 },{ "citationRef_s":"NDT & E International, 2006, 39 (8), pp.652-660. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ndteint.2006.04.005\">⟨10.1016/j.ndteint.2006.04.005⟩</a>", "citationFull_s":"D. Mercier, J. Lesage, X. Decoopman, Didier Chicot. Eddy currents and hardness testing for evaluation of steel decarburizing. NDT & E International, 2006, 39 (8), pp.652-660. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ndteint.2006.04.005\">⟨10.1016/j.ndteint.2006.04.005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577782v1\">⟨hal-03577782⟩</a>", "title_s":["Eddy currents and hardness testing for evaluation of steel decarburizing"], "authFullName_s":["D. Mercier","J. Lesage","X. Decoopman","Didier Chicot"], "halId_s":"hal-03577782", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 201 (5), pp.2038-2045. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.054\">⟨10.1016/j.surfcoat.2006.04.054⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, J. Lesage, Didier Chicot, J.G. La Barbera-Sosa, et al.. Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying. Surface and Coatings Technology, 2006, 201 (5), pp.2038-2045. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.054\">⟨10.1016/j.surfcoat.2006.04.054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577783v1\">⟨hal-03577783⟩</a>", "title_s":["Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","J. Lesage","Didier Chicot","J.G. La Barbera-Sosa","E.A. Ochoa-Pérez"], "halId_s":"hal-03577783", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.056\">⟨10.1016/j.surfcoat.2006.04.056⟩</a>", "citationFull_s":"Y.Y. Santana, J.G. La Barbera-Sosa, M.H. Staia, J. Lesage, Eli Saúl Puchi-Cabrera, et al.. Measurement of residual stress in thermal spray coatings by the incremental hole drilling method. Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.056\">⟨10.1016/j.surfcoat.2006.04.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577784v1\">⟨hal-03577784⟩</a>", "title_s":["Measurement of residual stress in thermal spray coatings by the incremental hole drilling method"], "authFullName_s":["Y.Y. Santana","J.G. La Barbera-Sosa","M.H. Staia","J. Lesage","Eli Saúl Puchi-Cabrera","Didier Chicot","E. Bemporad"], "halId_s":"hal-03577784", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 200 (18-19), pp.5447-5454. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.07.066\">⟨10.1016/j.surfcoat.2005.07.066⟩</a>", "citationFull_s":"Y. Benarioua, J. Lesage, E. Bemporad, Didier Chicot. Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel. Surface and Coatings Technology, 2006, 200 (18-19), pp.5447-5454. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.07.066\">⟨10.1016/j.surfcoat.2005.07.066⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577789v1\">⟨hal-03577789⟩</a>", "title_s":["Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel"], "authFullName_s":["Y. Benarioua","J. Lesage","E. Bemporad","Didier Chicot"], "halId_s":"hal-03577789", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Thin Solid Films, 2006, 497 (1-2), pp.232-238. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2005.09.194\">⟨10.1016/j.tsf.2005.09.194⟩</a>", "citationFull_s":"J. Lesage, A. Pertuz, Eli Saúl Puchi-Cabrera, Didier Chicot. A model to determine the surface hardness of thin films from standard micro-indentation tests. Thin Solid Films, 2006, 497 (1-2), pp.232-238. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2005.09.194\">⟨10.1016/j.tsf.2005.09.194⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577790v1\">⟨hal-03577790⟩</a>", "title_s":["A model to determine the surface hardness of thin films from standard micro-indentation tests"], "authFullName_s":["J. Lesage","A. Pertuz","Eli Saúl Puchi-Cabrera","Didier Chicot"], "halId_s":"hal-03577790", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 200, pp.5447-5454. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.07.066\">⟨10.1016/j.surfcoat.2005.07.066⟩</a>", "citationFull_s":"Y. Benarioua, Jacky Lesage, E. Bemporad, Didier Chicot. Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel. Surface and Coatings Technology, 2006, 200, pp.5447-5454. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.07.066\">⟨10.1016/j.surfcoat.2005.07.066⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00021920v1\">⟨hal-00021920⟩</a>", "title_s":["Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel"], "authFullName_s":["Y. Benarioua","Jacky Lesage","E. Bemporad","Didier Chicot"], "halId_s":"hal-00021920", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"International Journal of Refractory Metals and Hard Materials, 2006, 24 (1-2), pp.183-188. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmhm.2005.06.006\">⟨10.1016/j.ijrmhm.2005.06.006⟩</a>", "citationFull_s":"M.H. Staia, I.J. Torres, C. Castillo, T.S. Sudarshan, J. Lesage, et al.. Tribological study of WC produced by plasma pressure compaction. International Journal of Refractory Metals and Hard Materials, 2006, 24 (1-2), pp.183-188. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ijrmhm.2005.06.006\">⟨10.1016/j.ijrmhm.2005.06.006⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577792v1\">⟨hal-03577792⟩</a>", "title_s":["Tribological study of WC produced by plasma pressure compaction"], "authFullName_s":["M.H. Staia","I.J. Torres","C. Castillo","T.S. Sudarshan","J. Lesage","Didier Chicot"], "halId_s":"hal-03577792", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 201, pp.2038-2045. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.054\">⟨10.1016/j.surfcoat.2006.04.054⟩</a>", "citationFull_s":"Eli Saúl Puchi-Cabrera, M.H. Staia, Jacky Lesage, Didier Chicot, J.G. La Barbera-Sosa, et al.. Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying. Surface and Coatings Technology, 2006, 201, pp.2038-2045. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.054\">⟨10.1016/j.surfcoat.2006.04.054⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00096703v1\">⟨hal-00096703⟩</a>", "title_s":["Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying"], "authFullName_s":["Eli Saúl Puchi-Cabrera","M.H. Staia","Jacky Lesage","Didier Chicot","J.G. La Barbera-Sosa","E.A. Ochoa-Pérez"], "halId_s":"hal-00096703", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Thin Solid Films, 2006, 497, pp.232-238. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2005.09.194\">⟨10.1016/j.tsf.2005.09.194⟩</a>", "citationFull_s":"Jacky Lesage, A. Pertuz, Eli Saúl Puchi-Cabrera, Didier Chicot. A model to determine the surface hardness of thin films from standard micro-indentation tests. Thin Solid Films, 2006, 497, pp.232-238. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.tsf.2005.09.194\">⟨10.1016/j.tsf.2005.09.194⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00018995v1\">⟨hal-00018995⟩</a>", "title_s":["A model to determine the surface hardness of thin films from standard micro-indentation tests"], "authFullName_s":["Jacky Lesage","A. Pertuz","Eli Saúl Puchi-Cabrera","Didier Chicot"], "halId_s":"hal-00018995", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.056\">⟨10.1016/j.surfcoat.2006.04.056⟩</a>", "citationFull_s":"Y.Y. Santana, J.G. La Barbera-Sosa, M.H. Staia, Jacky Lesage, Eli Saúl Puchi-Cabrera, et al.. Measurement of residual stress in thermal spray coatings by the incremental hole drilling method. Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2006.04.056\">⟨10.1016/j.surfcoat.2006.04.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00124458v1\">⟨hal-00124458⟩</a>", "title_s":["Measurement of residual stress in thermal spray coatings by the incremental hole drilling method"], "authFullName_s":["Y.Y. Santana","J.G. La Barbera-Sosa","M.H. Staia","Jacky Lesage","Eli Saúl Puchi-Cabrera","Didier Chicot","E. Bemporad"], "halId_s":"hal-00124458", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"NDT & E International, 2006, 39 (8), pp.652-660. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ndteint.2006.04.005\">⟨10.1016/j.ndteint.2006.04.005⟩</a>", "citationFull_s":"David Mercier, Jacky Lesage, Xavier Decoopman, Didier Chicot. Eddy currents and hardness testing for evaluation of steel decarburizing. NDT & E International, 2006, 39 (8), pp.652-660. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.ndteint.2006.04.005\">⟨10.1016/j.ndteint.2006.04.005⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00124230v1\">⟨hal-00124230⟩</a>", "title_s":["Eddy currents and hardness testing for evaluation of steel decarburizing"], "authFullName_s":["David Mercier","Jacky Lesage","Xavier Decoopman","Didier Chicot"], "halId_s":"hal-00124230", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Revista Matéria, 2006, 11 (2), pp.88-100", "citationFull_s":"David Mercier, Didier Chicot. Combined Micro-Hardness and Eddy Currents Applied to the Study of Steel Decarburizing. Revista Matéria, 2006, 11 (2), pp.88-100. <a target=\"_blank\" href=\"https://hal.science/hal-00125228v1\">⟨hal-00125228⟩</a>", "title_s":["Combined Micro-Hardness and Eddy Currents Applied to the Study of Steel Decarburizing"], "authFullName_s":["David Mercier","Didier Chicot"], "halId_s":"hal-00125228", "docType_s":"ART", "producedDateY_i":2006 },{ "citationRef_s":"Surface and Coatings Technology, 2005, 200 (1-4), pp.886-889. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.01.056\">⟨10.1016/j.surfcoat.2005.01.056⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, A. Pertuz, P.-Y. Jouan, N. Horny, et al.. A model for hardness determination of thin coatings from standard micro-indentation tests. Surface and Coatings Technology, 2005, 200 (1-4), pp.886-889. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.01.056\">⟨10.1016/j.surfcoat.2005.01.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577794v1\">⟨hal-03577794⟩</a>", "title_s":["A model for hardness determination of thin coatings from standard micro-indentation tests"], "authFullName_s":["J. Lesage","Didier Chicot","A. Pertuz","P.-Y. Jouan","N. Horny","A. Soom"], "halId_s":"hal-03577794", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Surface and Coatings Technology, 2005, 200 (1-4), pp.174-177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.02.045\">⟨10.1016/j.surfcoat.2005.02.045⟩</a>", "citationFull_s":"Didier Chicot, P. Araujo, N. Horny, Arnaud Tricoteaux, J. Lesage. Application of the interfacial indentation test for adhesion toughness determination. Surface and Coatings Technology, 2005, 200 (1-4), pp.174-177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.02.045\">⟨10.1016/j.surfcoat.2005.02.045⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577795v1\">⟨hal-03577795⟩</a>", "title_s":["Application of the interfacial indentation test for adhesion toughness determination"], "authFullName_s":["Didier Chicot","P. Araujo","N. Horny","Arnaud Tricoteaux","J. Lesage"], "halId_s":"hal-03577795", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Journal de Physique IV Proceedings, 2005, 124, pp.195-199. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/jp4:2005124028\">⟨10.1051/jp4:2005124028⟩</a>", "citationFull_s":"Y. Benarioua, Didier Chicot, J. Lesage. Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté. Journal de Physique IV Proceedings, 2005, 124, pp.195-199. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/jp4:2005124028\">⟨10.1051/jp4:2005124028⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586281v1\">⟨hal-03586281⟩</a>", "title_s":["Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté"], "authFullName_s":["Y. Benarioua","Didier Chicot","J. Lesage"], "halId_s":"hal-03586281", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Surface and Coatings Technology, 2005, 200, pp.174-177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.02.045\">⟨10.1016/j.surfcoat.2005.02.045⟩</a>", "citationFull_s":"Didier Chicot, P. Araujo, N. Horny, Arnaud Tricoteaux, Jacky Lesage. Application of the interfacial indentation test for adhesion toughness determination. Surface and Coatings Technology, 2005, 200, pp.174-177. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.02.045\">⟨10.1016/j.surfcoat.2005.02.045⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00019028v1\">⟨hal-00019028⟩</a>", "title_s":["Application of the interfacial indentation test for adhesion toughness determination"], "authFullName_s":["Didier Chicot","P. Araujo","N. Horny","Arnaud Tricoteaux","Jacky Lesage"], "halId_s":"hal-00019028", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Surface and Coatings Technology, 2005, 200, pp.886-889. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.01.056\">⟨10.1016/j.surfcoat.2005.01.056⟩</a>", "citationFull_s":"Jacky Lesage, Didier Chicot, A. Pertuz, Pierre-Yves Jouan, N. Horny, et al.. A model for hardness determination of thin coatings from standard micro-indentation tests. Surface and Coatings Technology, 2005, 200, pp.886-889. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/j.surfcoat.2005.01.056\">⟨10.1016/j.surfcoat.2005.01.056⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00019021v1\">⟨hal-00019021⟩</a>", "title_s":["A model for hardness determination of thin coatings from standard micro-indentation tests"], "authFullName_s":["Jacky Lesage","Didier Chicot","A. Pertuz","Pierre-Yves Jouan","N. Horny","A. Soom"], "halId_s":"hal-00019021", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Journal of Physics IV France, 2005, 124, pp.195-199", "citationFull_s":"Y. Benarioua, Didier Chicot, Jacky Lesage. Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté. Journal of Physics IV France, 2005, 124, pp.195-199. <a target=\"_blank\" href=\"https://hal.science/hal-00018954v1\">⟨hal-00018954⟩</a>", "title_s":["Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté"], "authFullName_s":["Y. Benarioua","Didier Chicot","Jacky Lesage"], "halId_s":"hal-00018954", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Surface Engineering, 2005, 21, pp.35-40. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329405X30020\">⟨10.1179/174329405X30020⟩</a>", "citationFull_s":"P. Araujo, Didier Chicot, M. Staia, Jacky Lesage. Residual stresses and adhesion of thermal spray coatings. Surface Engineering, 2005, 21, pp.35-40. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/174329405X30020\">⟨10.1179/174329405X30020⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00069790v1\">⟨hal-00069790⟩</a>", "title_s":["Residual stresses and adhesion of thermal spray coatings"], "authFullName_s":["P. Araujo","Didier Chicot","M. Staia","Jacky Lesage"], "halId_s":"hal-00069790", "docType_s":"ART", "producedDateY_i":2005 },{ "citationRef_s":"Revue de Métallurgie, 2004, 101 (12), pp.1043-1052. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal:2004110\">⟨10.1051/metal:2004110⟩</a>", "citationFull_s":"H. Bléhaut, Didier Chicot, P. Flahaut, J. Lesage. Effects of grinding on the surface integrity of an austenitic stainless steel. Revue de Métallurgie, 2004, 101 (12), pp.1043-1052. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal:2004110\">⟨10.1051/metal:2004110⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577799v1\">⟨hal-03577799⟩</a>", "title_s":["Effects of grinding on the surface integrity of an austenitic stainless steel"], "authFullName_s":["H. Bléhaut","Didier Chicot","P. Flahaut","J. Lesage"], "halId_s":"hal-03577799", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Surface Engineering, 2004, 18 (4), pp.265-269. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708401225005359\">⟨10.1179/026708401225005359⟩</a>", "citationFull_s":"M. Staia, A. Conzoño, M. Cruz, A. Roman, J. Lesage, et al.. Wear Behaviour of Silicon Carbide/Electroless Nickel Composite Coatings at High Temperature. Surface Engineering, 2004, 18 (4), pp.265-269. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708401225005359\">⟨10.1179/026708401225005359⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577805v1\">⟨hal-03577805⟩</a>", "title_s":["Wear Behaviour of Silicon Carbide/Electroless Nickel Composite Coatings at High Temperature"], "authFullName_s":["M. Staia","A. Conzoño","M. Cruz","A. Roman","J. Lesage","Didier Chicot","G. Mesmacque"], "halId_s":"hal-03577805", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Materials Science and Technology, 2004, 20, pp.877-884. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708304225017427\">⟨10.1179/026708304225017427⟩</a>", "citationFull_s":"Didier Chicot, Alberto Pertuz, Francine Roudet, M.H. Staia, Jacky Lesage. New developments for fracture toughness determination by Vickers indentation. Materials Science and Technology, 2004, 20, pp.877-884. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708304225017427\">⟨10.1179/026708304225017427⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00078025v1\">⟨hal-00078025⟩</a>", "title_s":["New developments for fracture toughness determination by Vickers indentation"], "authFullName_s":["Didier Chicot","Alberto Pertuz","Francine Roudet","M.H. Staia","Jacky Lesage"], "halId_s":"hal-00078025", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Revue de Métallurgie CIT, Science et Génie des Matériaux (CITY/SGM), 2004, 12, pp.1043-1052", "citationFull_s":"H. Blehaut, Didier Chicot, P. Flahaut, Jacky Lesage. Effects of grinding on the surface integrity of an austenitic stainless steel. Revue de Métallurgie CIT, Science et Génie des Matériaux (CITY/SGM), 2004, 12, pp.1043-1052. <a target=\"_blank\" href=\"https://hal.science/hal-00138191v1\">⟨hal-00138191⟩</a>", "title_s":["Effects of grinding on the surface integrity of an austenitic stainless steel"], "authFullName_s":["H. Blehaut","Didier Chicot","P. Flahaut","Jacky Lesage"], "halId_s":"hal-00138191", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Revista Matéria, 2004, 9 (1), pp.1-12", "citationFull_s":"C.S. Vianna, Didier Chicot, Jacky Lesage, P.E.V. de Miranda. Difusao de hidrogenio en martensita. Revista Matéria, 2004, 9 (1), pp.1-12. <a target=\"_blank\" href=\"https://hal.science/hal-00138903v1\">⟨hal-00138903⟩</a>", "title_s":["Difusao de hidrogenio en martensita"], "authFullName_s":["C.S. Vianna","Didier Chicot","Jacky Lesage","P.E.V. de Miranda"], "halId_s":"hal-00138903", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Traitement Thermique, 2004, 359, pp.37-42", "citationFull_s":"Jacky Lesage, Didier Chicot. L'indentation appliquée à la caractérisation des matériaux. Traitement Thermique, 2004, 359, pp.37-42. <a target=\"_blank\" href=\"https://hal.science/hal-00138917v1\">⟨hal-00138917⟩</a>", "title_s":["L'indentation appliquée à la caractérisation des matériaux"], "authFullName_s":["Jacky Lesage","Didier Chicot"], "halId_s":"hal-00138917", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Revista Matéria, 2004, 9 (1), pp.13-22", "citationFull_s":"Jacky Lesage, Alberto Pertuz, Didier Chicot. A new model to determine the hardness of thin films. Revista Matéria, 2004, 9 (1), pp.13-22. <a target=\"_blank\" href=\"https://hal.science/hal-00138919v1\">⟨hal-00138919⟩</a>", "title_s":["A new model to determine the hardness of thin films"], "authFullName_s":["Jacky Lesage","Alberto Pertuz","Didier Chicot"], "halId_s":"hal-00138919", "docType_s":"ART", "producedDateY_i":2004 },{ "citationRef_s":"Thin Solid Films, 2002, 415 (1-2), pp.143-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(02)00488-1\">⟨10.1016/S0040-6090(02)00488-1⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot. Role of residual stresses on interface toughness of thermally sprayed coatings. Thin Solid Films, 2002, 415 (1-2), pp.143-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(02)00488-1\">⟨10.1016/S0040-6090(02)00488-1⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577800v1\">⟨hal-03577800⟩</a>", "title_s":["Role of residual stresses on interface toughness of thermally sprayed coatings"], "authFullName_s":["J. Lesage","Didier Chicot"], "halId_s":"hal-03577800", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(02)00109-3\">⟨10.1016/S0257-8972(02)00109-3⟩</a>", "citationFull_s":"A Roman, Didier Chicot, J Lesage. Indentation tests to determine the fracture toughness of nickel phosphorus coatings. Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(02)00109-3\">⟨10.1016/S0257-8972(02)00109-3⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577804v1\">⟨hal-03577804⟩</a>", "title_s":["Indentation tests to determine the fracture toughness of nickel phosphorus coatings"], "authFullName_s":["A Roman","Didier Chicot","J Lesage"], "halId_s":"hal-03577804", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Thin Solid Films, 2002, 415 (1-2), pp.143-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(02)00488-1\">⟨10.1016/S0040-6090(02)00488-1⟩</a>", "citationFull_s":"Jacky Lesage, Didier Chicot. Role of residual stresses on interface toughness of thermaly sprayed coatings. Thin Solid Films, 2002, 415 (1-2), pp.143-150. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(02)00488-1\">⟨10.1016/S0040-6090(02)00488-1⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00140375v1\">⟨hal-00140375⟩</a>", "title_s":["Role of residual stresses on interface toughness of thermaly sprayed coatings"], "authFullName_s":["Jacky Lesage","Didier Chicot"], "halId_s":"hal-00140375", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(02)00109-3\">⟨10.1016/S0257-8972(02)00109-3⟩</a>", "citationFull_s":"Adriana Roman, Didier Chicot, Jacky Lesage. Indentation tests to determine toughness of nickel phosphorus coatings. Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(02)00109-3\">⟨10.1016/S0257-8972(02)00109-3⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00140383v1\">⟨hal-00140383⟩</a>", "title_s":["Indentation tests to determine toughness of nickel phosphorus coatings"], "authFullName_s":["Adriana Roman","Didier Chicot","Jacky Lesage"], "halId_s":"hal-00140383", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Acta Microscopica, 2002, 11, pp.31-36", "citationFull_s":"M. Zampronio, P.E.V. de Miranda, O. Bartier, Didier Chicot, Jacky Lesage. Fatigue crack initiation on plasma nitrided steel with and without hydrogen. Acta Microscopica, 2002, 11, pp.31-36. <a target=\"_blank\" href=\"https://hal.science/hal-00140387v1\">⟨hal-00140387⟩</a>", "title_s":["Fatigue crack initiation on plasma nitrided steel with and without hydrogen"], "authFullName_s":["M. Zampronio","P.E.V. de Miranda","O. Bartier","Didier Chicot","Jacky Lesage"], "halId_s":"hal-00140387", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Mécanique et Industries, 2002, 3 (3), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/s1296-2139(02)01167-3\">⟨10.1016/s1296-2139(02)01167-3⟩</a>", "citationFull_s":"A Amrouche, Gérard Mesmacque, Didier Chicot. Étude des transformations microstructurales survenant lors de l'endommagement par frottement sec d'un couple fonte/acierA study of microstructural transformations occurring during the deterioration by dry friction of an iron/steel pair. Mécanique et Industries, 2002, 3 (3), pp.237-243. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/s1296-2139(02)01167-3\">⟨10.1016/s1296-2139(02)01167-3⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586283v1\">⟨hal-03586283⟩</a>", "title_s":["Étude des transformations microstructurales survenant lors de l'endommagement par frottement sec d'un couple fonte/acierA study of microstructural transformations occurring during the deterioration by dry friction of an iron/steel pair"], "authFullName_s":["A Amrouche","Gérard Mesmacque","Didier Chicot"], "halId_s":"hal-03586283", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Surface Engineering, 2002, 18 (4), pp.265-269. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708401225005359\">⟨10.1179/026708401225005359⟩</a>", "citationFull_s":"M. Staia, A. Conzono, M.R. Cruz, A. Roman, Jacky Lesage, et al.. Wear behaviour of silicon carbide / electroless nickel composite coatings at high temperatures. Surface Engineering, 2002, 18 (4), pp.265-269. <a target=\"_blank\" href=\"https://dx.doi.org/10.1179/026708401225005359\">⟨10.1179/026708401225005359⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00140371v1\">⟨hal-00140371⟩</a>", "title_s":["Wear behaviour of silicon carbide / electroless nickel composite coatings at high temperatures"], "authFullName_s":["M. Staia","A. Conzono","M.R. Cruz","A. Roman","Jacky Lesage","Didier Chicot","Gérard Mesmacque"], "halId_s":"hal-00140371", "docType_s":"ART", "producedDateY_i":2002 },{ "citationRef_s":"Surface and Coatings Technology, 2001, 146-147, pp.563-570. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(01)01438-4\">⟨10.1016/S0257-8972(01)01438-4⟩</a>", "citationFull_s":"M.H. Staia, T. Valente, C. Bartuli, D.B. Lewis, C.P. Constable, et al.. Part II: tribological performance of Cr3C2-25% NiCr reactive plasma sprayed coatings deposited at different pressures. Surface and Coatings Technology, 2001, 146-147, pp.563-570. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(01)01438-4\">⟨10.1016/S0257-8972(01)01438-4⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577808v1\">⟨hal-03577808⟩</a>", "title_s":["Part II: tribological performance of Cr3C2-25% NiCr reactive plasma sprayed coatings deposited at different pressures"], "authFullName_s":["M.H. Staia","T. Valente","C. Bartuli","D.B. Lewis","C.P. Constable","A. Roman","J. Lesage","Didier Chicot","G. Mesmacque"], "halId_s":"hal-03577808", "docType_s":"ART", "producedDateY_i":2001 },{ "citationRef_s":"Surface and Coatings Technology, 2001, 14-147, pp.563-570. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(01)01438-4\">⟨10.1016/S0257-8972(01)01438-4⟩</a>", "citationFull_s":"M.H. Staia, T. Valentine, C. Bartuli, D.B. Lewis, A. Roman, et al.. Part II : Tribological performance of Cr3C2 - 25 % NiCr plasma sprayed coatings at different pressures. Surface and Coatings Technology, 2001, 14-147, pp.563-570. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0257-8972(01)01438-4\">⟨10.1016/S0257-8972(01)01438-4⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00140879v1\">⟨hal-00140879⟩</a>", "title_s":["Part II : Tribological performance of Cr3C2 - 25 % NiCr plasma sprayed coatings at different pressures"], "authFullName_s":["M.H. Staia","T. Valentine","C. Bartuli","D.B. Lewis","A. Roman","Jacky Lesage","Didier Chicot","Gérard Mesmacque"], "halId_s":"hal-00140879", "docType_s":"ART", "producedDateY_i":2001 },{ "citationRef_s":"Thin Solid Films, 2000, 377-378, pp.657-664. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/s0040-6090(00)01447-4\">⟨10.1016/s0040-6090(00)01447-4⟩</a>", "citationFull_s":"M.H. Staia, E. Ramos, A. Carrasquero, A. Roman, J. Lesage, et al.. Effect of substrate roughness induced by grit blasting upon adhesion of WC-17% Co thermal sprayed coatings. Thin Solid Films, 2000, 377-378, pp.657-664. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/s0040-6090(00)01447-4\">⟨10.1016/s0040-6090(00)01447-4⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577814v1\">⟨hal-03577814⟩</a>", "title_s":["Effect of substrate roughness induced by grit blasting upon adhesion of WC-17% Co thermal sprayed coatings"], "authFullName_s":["M.H. Staia","E. Ramos","A. Carrasquero","A. Roman","J. Lesage","Didier Chicot","G. Mesmacque"], "halId_s":"hal-03577814", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Thin Solid Films, 2000, 377-378, pp.675-680. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01449-8\">⟨10.1016/S0040-6090(00)01449-8⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, P. Araujo, M. Zampronio, P.E.V. de Miranda. Role of hydrogen on adhesion of NiCr thermal sprayed coatings. Thin Solid Films, 2000, 377-378, pp.675-680. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01449-8\">⟨10.1016/S0040-6090(00)01449-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577811v1\">⟨hal-03577811⟩</a>", "title_s":["Role of hydrogen on adhesion of NiCr thermal sprayed coatings"], "authFullName_s":["J. Lesage","Didier Chicot","P. Araujo","M. Zampronio","P.E.V. de Miranda"], "halId_s":"hal-03577811", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Thin Solid Films, 2000, 377-378, pp.681-686. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01450-4\">⟨10.1016/S0040-6090(00)01450-4⟩</a>", "citationFull_s":"J. Lesage, M.H. Staia, Didier Chicot, C. Godoy, P.E.V. de Miranda. Effect of thermal treatments on adhesive properties of a NiCr thermal sprayed coating. Thin Solid Films, 2000, 377-378, pp.681-686. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01450-4\">⟨10.1016/S0040-6090(00)01450-4⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577810v1\">⟨hal-03577810⟩</a>", "title_s":["Effect of thermal treatments on adhesive properties of a NiCr thermal sprayed coating"], "authFullName_s":["J. Lesage","M.H. Staia","Didier Chicot","C. Godoy","P.E.V. de Miranda"], "halId_s":"hal-03577810", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Materials Science and Engineering: A, 2000, 282 (1-2), pp.203-212. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0921-5093(99)00753-4\">⟨10.1016/S0921-5093(99)00753-4⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, O. Bartier, M.A. Zampronio, P.E.V. de Miranda. Influence of hydrogen contamination on the tensile behavior of a plasma ion nitrided steel. Materials Science and Engineering: A, 2000, 282 (1-2), pp.203-212. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0921-5093(99)00753-4\">⟨10.1016/S0921-5093(99)00753-4⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577815v1\">⟨hal-03577815⟩</a>", "title_s":["Influence of hydrogen contamination on the tensile behavior of a plasma ion nitrided steel"], "authFullName_s":["J. Lesage","Didier Chicot","O. Bartier","M.A. Zampronio","P.E.V. de Miranda"], "halId_s":"hal-03577815", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Thin Solid Films, 2000, 359 (2), pp.228-235. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(99)00879-2\">⟨10.1016/S0040-6090(99)00879-2⟩</a>", "citationFull_s":"Didier Chicot, Y Bénarioua, J Lesage. Hardness measurements of Ti and TiC multilayers: a model. Thin Solid Films, 2000, 359 (2), pp.228-235. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(99)00879-2\">⟨10.1016/S0040-6090(99)00879-2⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577817v1\">⟨hal-03577817⟩</a>", "title_s":["Hardness measurements of Ti and TiC multilayers: a model"], "authFullName_s":["Didier Chicot","Y Bénarioua","J Lesage"], "halId_s":"hal-03577817", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Thin Solid Films, 2000, 377-378, pp.675-680. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01449-8\">⟨10.1016/S0040-6090(00)01449-8⟩</a>", "citationFull_s":"Jacky Lesage, Didier Chicot, P. Araujo, M. Zampronio, P.E.V. de Miranda. Role of hydrogen on adhesion of NiCr thermal sprayed coatings. Thin Solid Films, 2000, 377-378, pp.675-680. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/S0040-6090(00)01449-8\">⟨10.1016/S0040-6090(00)01449-8⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-00140874v1\">⟨hal-00140874⟩</a>", "title_s":["Role of hydrogen on adhesion of NiCr thermal sprayed coatings"], "authFullName_s":["Jacky Lesage","Didier Chicot","P. Araujo","M. Zampronio","P.E.V. de Miranda"], "halId_s":"hal-00140874", "docType_s":"ART", "producedDateY_i":2000 },{ "citationRef_s":"Revue de Métallurgie, 1999, 96 (9), pp.1121-1130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199996091121\">⟨10.1051/metal/199996091121⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, Y. Benarioua, P. Araujo, P. Démarécaux. Vers une optimisation des modèles de dureté de films minces. Revue de Métallurgie, 1999, 96 (9), pp.1121-1130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199996091121\">⟨10.1051/metal/199996091121⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586290v1\">⟨hal-03586290⟩</a>", "title_s":["Vers une optimisation des modèles de dureté de films minces"], "authFullName_s":["J. Lesage","Didier Chicot","Y. Benarioua","P. Araujo","P. Démarécaux"], "halId_s":"hal-03586290", "docType_s":"ART", "producedDateY_i":1999 },{ "citationRef_s":"Matériaux et Techniques, 1999, 87 (9-10), pp.29-34. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199987090029\">⟨10.1051/mattech/199987090029⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, D. Judas, M. Zampronio, P. Araujo, et al.. Mesures par indentation interfaciale de l’adhérence de revêtements NiCr projetés thermiquement. Matériaux et Techniques, 1999, 87 (9-10), pp.29-34. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199987090029\">⟨10.1051/mattech/199987090029⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586292v1\">⟨hal-03586292⟩</a>", "title_s":["Mesures par indentation interfaciale de l’adhérence de revêtements NiCr projetés thermiquement"], "authFullName_s":["J. Lesage","Didier Chicot","D. Judas","M. Zampronio","P. Araujo","P.E.V. de Miranda"], "halId_s":"hal-03586292", "docType_s":"ART", "producedDateY_i":1999 },{ "citationRef_s":"Revue de Métallurgie, 1998, 95 (12), pp.1511-1518. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199895121511\">⟨10.1051/metal/199895121511⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot, O. Bartier, M. Zampronio, P.E.V. de Miranda. Influence de l'hydrogène sur le comportement en traction d'un acier faiblement allié nitruré ioniquement. Revue de Métallurgie, 1998, 95 (12), pp.1511-1518. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199895121511\">⟨10.1051/metal/199895121511⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586295v1\">⟨hal-03586295⟩</a>", "title_s":["Influence de l'hydrogène sur le comportement en traction d'un acier faiblement allié nitruré ioniquement"], "authFullName_s":["J. Lesage","Didier Chicot","O. Bartier","M. Zampronio","P.E.V. de Miranda"], "halId_s":"hal-03586295", "docType_s":"ART", "producedDateY_i":1998 },{ "citationRef_s":"Revue de Métallurgie, 1998, 95 (5), pp.659-668. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199895050659\">⟨10.1051/metal/199895050659⟩</a>", "citationFull_s":"Didier Chicot, O. Bartier, M. Zampronio, P.E.V. de Miranda, J. Lesage. Diffusion et solubilité de l’hydrogène dans un acier faiblement allié nitruré ioniquement. Revue de Métallurgie, 1998, 95 (5), pp.659-668. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199895050659\">⟨10.1051/metal/199895050659⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586298v1\">⟨hal-03586298⟩</a>", "title_s":["Diffusion et solubilité de l’hydrogène dans un acier faiblement allié nitruré ioniquement"], "authFullName_s":["Didier Chicot","O. Bartier","M. Zampronio","P.E.V. de Miranda","J. Lesage"], "halId_s":"hal-03586298", "docType_s":"ART", "producedDateY_i":1998 },{ "citationRef_s":"Matériaux et Techniques, 1998, 86 (7-8), pp.33-38. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199886070033\">⟨10.1051/mattech/199886070033⟩</a>", "citationFull_s":"J. Lesage, Didier Chicot. Dureté des revêtements épais : modification du modèle de Jönsson et Hogmark. Matériaux et Techniques, 1998, 86 (7-8), pp.33-38. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199886070033\">⟨10.1051/mattech/199886070033⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586299v1\">⟨hal-03586299⟩</a>", "title_s":["Dureté des revêtements épais : modification du modèle de Jönsson et Hogmark"], "authFullName_s":["J. Lesage","Didier Chicot"], "halId_s":"hal-03586299", "docType_s":"ART", "producedDateY_i":1998 },{ "citationRef_s":"Defect and Diffusion Forum (Online), 1997, 143-147, pp.939-944. <a target=\"_blank\" href=\"https://dx.doi.org/10.4028/www.scientific.net/DDF.143-147.939\">⟨10.4028/www.scientific.net/DDF.143-147.939⟩</a>", "citationFull_s":"M.A. Zampronio, O. Bartier, Didier Chicot, J. Lesage, Paul de Miranda. Hydrogen Diffusion in Plasma Ion Nitrided Steel. Defect and Diffusion Forum (Online), 1997, 143-147, pp.939-944. <a target=\"_blank\" href=\"https://dx.doi.org/10.4028/www.scientific.net/DDF.143-147.939\">⟨10.4028/www.scientific.net/DDF.143-147.939⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577820v1\">⟨hal-03577820⟩</a>", "title_s":["Hydrogen Diffusion in Plasma Ion Nitrided Steel"], "authFullName_s":["M.A. Zampronio","O. Bartier","Didier Chicot","J. Lesage","Paul de Miranda"], "halId_s":"hal-03577820", "docType_s":"ART", "producedDateY_i":1997 },{ "citationRef_s":"Thin Solid Films, 1996, 283 (1-2), pp.151-157. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(96)08763-9\">⟨10.1016/0040-6090(96)08763-9⟩</a>", "citationFull_s":"Didier Chicot, P Démarécaux, J Lesage. Apparent interface toughness of substrate and coating couples from indentation tests. Thin Solid Films, 1996, 283 (1-2), pp.151-157. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(96)08763-9\">⟨10.1016/0040-6090(96)08763-9⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577821v1\">⟨hal-03577821⟩</a>", "title_s":["Apparent interface toughness of substrate and coating couples from indentation tests"], "authFullName_s":["Didier Chicot","P Démarécaux","J Lesage"], "halId_s":"hal-03577821", "docType_s":"ART", "producedDateY_i":1996 },{ "citationRef_s":"Surface and Coatings Technology, 1996, 81 (2-3), pp.269-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0257-8972(95)02474-3\">⟨10.1016/0257-8972(95)02474-3⟩</a>", "citationFull_s":"Didier Chicot, I. Hage, P. Démarécaux, J. Lesage. Elastic properties determination from indentation tests. Surface and Coatings Technology, 1996, 81 (2-3), pp.269-274. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0257-8972(95)02474-3\">⟨10.1016/0257-8972(95)02474-3⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577823v1\">⟨hal-03577823⟩</a>", "title_s":["Elastic properties determination from indentation tests"], "authFullName_s":["Didier Chicot","I. Hage","P. Démarécaux","J. Lesage"], "halId_s":"hal-03577823", "docType_s":"ART", "producedDateY_i":1996 },{ "citationRef_s":"Revue de Métallurgie, 1996, 93 (2), pp.245-254. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199693020245\">⟨10.1051/metal/199693020245⟩</a>", "citationFull_s":"Didier Chicot, P. Démarécaux, J. Lesage. Mesure de la ténacité apparente d’interface par l’essai d’indentation interfaciale. Revue de Métallurgie, 1996, 93 (2), pp.245-254. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199693020245\">⟨10.1051/metal/199693020245⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586302v1\">⟨hal-03586302⟩</a>", "title_s":["Mesure de la ténacité apparente d’interface par l’essai d’indentation interfaciale"], "authFullName_s":["Didier Chicot","P. Démarécaux","J. Lesage"], "halId_s":"hal-03586302", "docType_s":"ART", "producedDateY_i":1996 },{ "citationRef_s":"Journal of Materials Science Letters, 1996, 15 (16), pp.1377-1380. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/BF00275281\">⟨10.1007/BF00275281⟩</a>", "citationFull_s":"Ph. Demarecaux, Didier Chicot, J. Lesage. Interface indentation test for the determination of adhesive properties of thermal sprayed coatings. Journal of Materials Science Letters, 1996, 15 (16), pp.1377-1380. <a target=\"_blank\" href=\"https://dx.doi.org/10.1007/BF00275281\">⟨10.1007/BF00275281⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577822v1\">⟨hal-03577822⟩</a>", "title_s":["Interface indentation test for the determination of adhesive properties of thermal sprayed coatings"], "authFullName_s":["Ph. Demarecaux","Didier Chicot","J. Lesage"], "halId_s":"hal-03577822", "docType_s":"ART", "producedDateY_i":1996 },{ "citationRef_s":"Revue de Métallurgie, 1995, 92 (5), pp.635-643. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199592050635\">⟨10.1051/metal/199592050635⟩</a>", "citationFull_s":"Didier Chicot, I. Hage, J. Lesage. Estimation du module d’Young par analyse de la géométrie de l’empreinte résiduelle après indentation Vickers. Revue de Métallurgie, 1995, 92 (5), pp.635-643. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/metal/199592050635\">⟨10.1051/metal/199592050635⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586307v1\">⟨hal-03586307⟩</a>", "title_s":["Estimation du module d’Young par analyse de la géométrie de l’empreinte résiduelle après indentation Vickers"], "authFullName_s":["Didier Chicot","I. Hage","J. Lesage"], "halId_s":"hal-03586307", "docType_s":"ART", "producedDateY_i":1995 },{ "citationRef_s":"Matériaux et Techniques, 1995, 83 (1-2), pp.45-49. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199583010045\">⟨10.1051/mattech/199583010045⟩</a>", "citationFull_s":"Didier Chicot, O. Bartier, M. Zampronio, P.E.V. de Miranda, J. Lesage. Apport de la diffraction des rayons X à l’étude d’un acier faiblement allié nitruré ioniquement par plasma. Matériaux et Techniques, 1995, 83 (1-2), pp.45-49. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199583010045\">⟨10.1051/mattech/199583010045⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586310v1\">⟨hal-03586310⟩</a>", "title_s":["Apport de la diffraction des rayons X à l’étude d’un acier faiblement allié nitruré ioniquement par plasma"], "authFullName_s":["Didier Chicot","O. Bartier","M. Zampronio","P.E.V. de Miranda","J. Lesage"], "halId_s":"hal-03586310", "docType_s":"ART", "producedDateY_i":1995 },{ "citationRef_s":"Thin Solid Films, 1995, 254 (1-2), pp.123-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(94)06239-H\">⟨10.1016/0040-6090(94)06239-H⟩</a>", "citationFull_s":"Didier Chicot, J. Lesage. Absolute hardness of films and coatings. Thin Solid Films, 1995, 254 (1-2), pp.123-130. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(94)06239-H\">⟨10.1016/0040-6090(94)06239-H⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577824v1\">⟨hal-03577824⟩</a>", "title_s":["Absolute hardness of films and coatings"], "authFullName_s":["Didier Chicot","J. Lesage"], "halId_s":"hal-03577824", "docType_s":"ART", "producedDateY_i":1995 },{ "citationRef_s":"Thin Solid Films, 1994, 241 (1-2), pp.230-233. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(94)90431-6\">⟨10.1016/0040-6090(94)90431-6⟩</a>", "citationFull_s":"M. Deffontaines-Fourez, B. Deffontaines, Didier Chicot, A. Iost. Microhardness and spectroscopy studies of surface modification of titanium alloys by melted metaphosphates. Thin Solid Films, 1994, 241 (1-2), pp.230-233. <a target=\"_blank\" href=\"https://dx.doi.org/10.1016/0040-6090(94)90431-6\">⟨10.1016/0040-6090(94)90431-6⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577825v1\">⟨hal-03577825⟩</a>", "title_s":["Microhardness and spectroscopy studies of surface modification of titanium alloys by melted metaphosphates"], "authFullName_s":["M. Deffontaines-Fourez","B. Deffontaines","Didier Chicot","A. Iost"], "halId_s":"hal-03577825", "docType_s":"ART", "producedDateY_i":1994 },{ "citationRef_s":"Matériaux et Techniques, 1994, 82 (10), pp.19-23. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199482100019\">⟨10.1051/mattech/199482100019⟩</a>", "citationFull_s":"Didier Chicot, J. Lesage. Dureté des matériaux déposés en couches minces. Matériaux et Techniques, 1994, 82 (10), pp.19-23. <a target=\"_blank\" href=\"https://dx.doi.org/10.1051/mattech/199482100019\">⟨10.1051/mattech/199482100019⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03586314v1\">⟨hal-03586314⟩</a>", "title_s":["Dureté des matériaux déposés en couches minces"], "authFullName_s":["Didier Chicot","J. Lesage"], "halId_s":"hal-03586314", "docType_s":"ART", "producedDateY_i":1994 },{ "citationRef_s":"Steel Research International, 1989, 60 (8), pp.370-374. <a target=\"_blank\" href=\"https://dx.doi.org/10.1002/srin.198901670\">⟨10.1002/srin.198901670⟩</a>", "citationFull_s":"Jacky Lesage, Didier Chicot, Mohamed Al Karaishi. Role of microstructure and residual stresses on fatigue crack initiation of carbonitrided steels. Steel Research International, 1989, 60 (8), pp.370-374. <a target=\"_blank\" href=\"https://dx.doi.org/10.1002/srin.198901670\">⟨10.1002/srin.198901670⟩</a>. <a target=\"_blank\" href=\"https://hal.science/hal-03577826v1\">⟨hal-03577826⟩</a>", "title_s":["Role of microstructure and residual stresses on fatigue crack initiation of carbonitrided steels"], "authFullName_s":["Jacky Lesage","Didier Chicot","Mohamed Al Karaishi"], "halId_s":"hal-03577826", "docType_s":"ART", "producedDateY_i":1989 }] } }

Rechercher

Paramétrage

Thèmes

Accessibilité

Didier Chicot

Publications