Rechercher

Paramétrage

Thèmes

Accessibilité

Accessibilité

Yvonnick Le Menach

Professeur des universités CNU : SECTION 63 - ELECTRONIQUE, OPTRONIQUE ET SYSTEMES

Publications

Article dans une revue scientifique

Articles de revue

  1. "Thermal topology optimization of a three layer laminated busbar for power converters", Puigdellivol O., Meresse D., Menach Y. L., Harmand S., and Wecxsteen J. F., IEEE Transactions on Power Electronics, Vol 32, issue 6, pp 4691-4699,june 2017
  2. "A method coupling modified vector potential A∗ and homogenization formulations to model short-circuits in lamination stacks", Ziani, S.,Henneron, T.,Puigdellivol, O., Le Menach, Y.  EPJ Applied Physics Volume 75, Number 3, September 2016
  3. "Model-order reduction of magneto-harmonic problems based on POD: Application to planar magnetic components", Taylor, L.Henneron, T. Margueron, X. Le Menach, Y. Le Moigne, P  EPJ Applied Physics  Volume 74, Number 1, April 2016
  4. "Estimation of FEM model parameters using data assimilation -Application to an electrical machine",A. Bacchus, J.-P. Argaud, B. Bouriquet, M. Biet, A. Tounzi, L. Macaire and Y. Le Menach, IEEE Trans Mag Vol: 52, Issue: 3, March 2016
  5. "Finite Element Implementation and Experimental Validation of 2D/3D Magnetic Force formulae", W.Boughanmi, F. Henrotte, F., A. Benabou,Y Le Menach, IEEE Trans Mag. Vol: 52, Issue: 3, March 2016.
  6. "A posteriori residual error estimators with mixed boundary conditions for quasi-static electromagnetic problem", Z. Tang, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, N. Nemitz, COMPEL, Volume 34, Issue 3, Pages 724-739, 2015.
  7. "Residual a posteriori estimator for magnetoharmonic potential formulations with global quantities for the source terms", Z. Tang, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, IEEE Trans Mag. Vol. 51 , Issue 3, 2015
  8. "Space-time residual-based a posteriori estimator for the A - φ formulation in eddy current problems", R. Tittarelli, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, O. Moreau, O Boiteau, IEEE Trans Mag. Vol. 51 , Issue 3, 2015
  9. "Finite element mesh adaptation strategy from residual and hierarchical error estimators in eddy current problems", P Dular, Y. Le Menach, Z. Tang, E. Creusé, F. Piriou, IEEE Trans Mag. Vol. 51, Issue 3, 2015
  10. "Comparison of Residual and Hierarchical Finite Element Error Estimators in Eddy Current Problems", Z. Tang, P.Dular, Y. Le Menach, E. Creusé, F. Piriou, , IEEE Trans Mag. Vol. 50 , Issue 2, 2014
  11. "Solution of Large Stochastic Finite Element Problems—Application to ECT-NDT; K. Beddek, S. Clenet, O. Moreau, Y. Le Menach, IEEE Trans Mag. Vol. 49 , Issue 5, pp 1605-1608, 2013.
  12. "Stochastic nondestructive testing simulation: Sensitivity analysis applied to material properties in clogging of nuclear powerplant steam generators", O. Moreau, K. Beddek, Y; S. Clenet, Y. Le Menach, IEEE Trans Mag. Vol. 49 , Issue 5 pp. 1873-1876, 2013.
  13. "Test harness on a preconditioned conjugate gradient solver on GPUs: An efficiency analysis", W. Rodrigues ,L Chevallier, Y. Le Menach,F. Guyomarc'h,  IEEE Trans. Mag., Vol. 49 , Issue 5 pp. 1729-1732, 2013
  14. "An arbitrary thick shell finite element for eddy-current dual vector-scalar potential formulations", P. Thomas, Y. Le Menach, , IEEE Trans. Mag., Vol. 49 , Issue 5 pp. 1725-1729, 2013.
  15. "Residual based a posteriori error estimators for harmonic A-j and  T-Ω formulations in eddy current problems", Z. Tang, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, N. Nemitz, IEEE Trans. Mag., Volume 49, Issue 5,pp. 1721-1724, 2013.
  16. "Residual and equilibrated error estimators for magnetostatic problems solved by finite element method", Z. Tang, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, N. Nemitz, IEEE Trans. Mag., Volume 49, Issue 12,  Pages 5715-5723, December 2013
  17. "A posteriori error estimator for harmonic A-φ formulation", Z. Tang, Y. Le Menach, E. Creusé, S. Nicaise, F. Piriou, N. Nemitz, , COMPEL, Volume 32, Issue 4, Pages 1219-1229, 2013
  18. "Residual-based a posteriori estimators for the T-W magnetodynamic harmonic formulation of the Maxwell system", International Journal of Numerical Analysis and Modeling E. Creusé, S. Nicaise, Z. Tang, Y. Le Menach, N. Nemitz, F. Piriou, Volume 10, Issue 2, Pages 411-429, 2013.
  19. "Spectral Finite Element Method for solving 3D stochastic eddy current problems", K. Beddek, S. Clenet, Y. Le Menach, O. Moreau, International Journal of Applied Electromagnetics and Mechanics, Vol. 39, pp 753-760; 2012
  20. "Adaptive method for non-intrusive spectral projection-application on a stochastic eddy current NDT problem", K. Beddek, S. Clenet, O. Moreau, V. Costan, Y. Le Menach, A. Benabou, IEEE Trans. Mag., Vol. 48, no 2, pp. 759-762, February 2012
  21. "Automatic multi-GPU code generation applied to simulation of electrical machines", W. Rodrigues, F. Guyomarc'h, Y. Le Menach, J.-L. Dekeyser, IEEE Trans. Mag., Vol. 48, no 2, pp. 831-834, February 2012
  22. "A three dimensional electromagnetic shell finite element for coupled vector scalar potential formulations", P. Thomas, Y. Le Menach, IEEE Trans. Mag., Vol. 48, no 2, pp. 823-826, February 2012
  23. "Residual-bsed a posteriori estimators for the A-j magnetodynamic harmonic formulation of the Maxwell system", E. Creusé, S. Nicaise, Z. Tang, Y. Le Menach, N. Nemitz, F. Piriou, Mathematical Models and Methods in Applied Sciences, Vol. 22, no 5, 1150028 (30 pages), January 2012.
  24. "3-D Stochastic Spectral Finite-Element Method in Static Electromagnetism Using Vector Potential Formulation", K. Beddek, Y. Le Menach, Y; S. Clenet, O. Moreau, IEEE Trans Mag, Volume 47, Issue 5, May 2011 Page(s) : 1250 – 1253
  25. "Study of Static and Dynamic Eccentricities of a Synchronous Generator Using 3D FEM", B. A. T. Iamamura1, Y. Le Menach, A. Tounzi, N. Sadowski, , E. Guillot, IEEE Trans Mag, Volume 46, Issue 8, August 2010 Page(s) : 3516 – 3519
  26. "Hysteresis Phenomenon Implementation in FIT: Validation with Measurements", J. Korecki, A. Benabou, Y. Le Menach, F. Piriou, J-P. Ducreux. IEEE Trans Mag, Volume 46, Issue 8, August 2010 Page(s) : 3285 – 3288
  27. “Parallel Direct Solver For the Finite Integration Technique in Electrokinetic Problems", A.Tinzefte, Y. Le Menach, J. Korecki, F. Guyomarch, ;,F. Piriou IEEE Trans Mag, Volume 46, Issue 8, August 2010 Page(s) : 3269-3272
  28. “Parallel direct silver for the finite integration technique in electromagnetics” , Abdelattif Tinzefte, Yvonnick Le Menach, J. Korecki. Francis Piriou, COMPEL, 2010, Number 4 , Volume 29, pp. 941-949(9)
  29. "Iterative Solvers For Singular Symmetric Linear Systems in Electromagnetism Low Frequency", Abdelattif Tinzefte, Yvonnick LE MENACH, Francis PIRIOU, IEEE Trans Mag, Volume 45, Issue 3,  March 2009 Page(s):1428 – 1431
  30. A mixed finite element/meshless natural element method for simulating rotative electromagnetic machines", L. ILLOUL, Yvonnick LE MENACH, Stéphane CLENET, F. CHINESTA, EPJ Appl. Phy, Vol. 43, pages. 197-208, 9-2008
  31. "Study of an electromagnetic gearbox involving two PM synchronous machines using 3D-FEM",Mathieu AUBERTIN, Abdelmounaïm TOUNZI, Yvonnick LE MENACH, IEEE Trans Mag, Volume 44, Issue 11 Part 2, Nov. 2008 Page(s):4381 – 4384
  32. "Implementation of a Vector Hysteresis Model in 2D Finite Element Analysis: Study of a RSST with Anisotropic Sample" Jean Vianei Leite, Abdelkader Benabou, Nelson Sadowski, Yvonnick Le Menach, Stéphane Clenet, Pedro Armando Da Silva Jr., International Journal of Applied Electromagnetics and Mechanics, Volume 28, Number 1-2 / 2008, page(s) 41-47.
  33. "Comparison between the Mortar Element Method and the Polynomial Interpolation Method to Model the Movement in the Finite Element Method", Xiaodong Shi, Yvonnick Le Menach, Jean-Pierre Ducreux, Francis Piriou, IEEE Trans, Volume 44, Issue 6, June 2008 Page(s):1314 - 1317
  34. "Numerical solutions in primal and dual mesh of magnetostatic problem solved with the Finite Integration Technique", J. Korecki, Y. Le Menach, J-P Ducreux, F. Piriou, COMPEL, volume 27, number 1 pp 47-55, 2008
  35. "Source Field Computation in NDT Applications",T. Henneron; Y. Le Menach; F. Piriou; O. Moreau; S. Clénet; J.-P. Ducreux; J.-C. Vérité, IEEE Trans Mag  Volume 43, Issue 4, April 2007 Page(s):1785 - 1788
  36. "Comparison of differents techniques to model the movement in 3D with FEM", X.Shi, Y. Le Menach, J.P. Ducreux, F. Piriou, COMPEL vol 25, no 1, pp. 17-30, 2006
  37. "Consideration of the coupling of magnetic and electric equations with Finite Integration Technique (F.I.T) ", G. Albertier, Y. Le Menach, J-P Ducreux, F.Piriou, European Physical Journal Applied Physics, vol.30 no 1, pp 17-22, avril 2005.
  38. "3-D approaches to determine the end winding inductances of a permanent-magnet linear synchronous motor", A.Tounzi, T Henneron, Y. Le Menach, R. Askour, E. Dumetz, F. Piriou Magnetics, IEEE Transactions on Volume 40, Issue 2, March 2004 Page(s):758 – 761
  39. "3D Compatible Potential Formulations Coupled to Electrical Circuits", Y.Le Ménach, S.Clénet, F.Piriou, COMPEL, vol.13, no 3, pp 776-786, 2000
  40. "3D computation of a claw pole magnet machine using a scalar potential formulation" Y.Le Ménach, S.Clénet, F. Piriou, J.F.Létourneau, P.Viarouge, European Physical Journal Applied Physics, vol.12, no 3, pp 175-182, 2000.
  41. "Numerical model to discretize source fields in the 3D  finite elements method", Y.Le Ménach, S.Clénet, F.Piriou, IEEE Transactions Magnetics, pp 676-679, vol.36, no 4, July 2000.
  42. "Determination and utilization of the source field in 3D magnetostatic problems", Y.Le Ménach, S.Clénet, F.Piriou, IEEE Transactions Magnetics, pp 2509-2512, vol.34, no 5 september 1998.