Rajashekhara Shabadi

maître de conférences
CNU : SECTION 33 - CHIMIE DES MATERIAUX
229, Bat.C6, Cité Scientifique, 59650Villeneuve d'Ascq
no image

Rajashekhara Shabadi

maître de conférences

Publications

Article dans des revues

  • Devadas Bhat Panemangalore, Rajashekhara Shabadi, Manoj Gupta, Rajan Ambat, Gang Ji, et al.. Microstructure and Corrosion Behavior of Extruded Mg-Zn-Er Alloys. Materials Science Forum, Trans Tech Publications Inc., 2018, 941, pp.1766-1771. ⟨10.4028/www.scientific.net/MSF.941.1766⟩. ⟨hal-02053266⟩
  • Abdelhakim Dorbane, Georges Ayoub, Bilal Mansoor, R. Hamade, G. Kridli, et al.. Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets. Materials Science and Engineering: A, Elsevier, 2016, 649, pp.190-200. ⟨10.1016/j.msea.2015.09.097⟩. ⟨hal-01303443⟩
  • Svava Davíðsdóttir, Jean-Pierre Petit, Rajashekhara Shabadi, Stela Canulescu, Klaus P. Almtoft, et al.. Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2 coatings on aluminum substrate. physica status solidi (a), Wiley, 2015, 212 (12), pp.2805-2815. ⟨10.1002/pssa.201532238⟩. ⟨hal-01298385⟩
  • Svava Davíđsdóttir, Jean-Pierre Petit, Michel Mermoux, Rajashekhara Shabadi, Stela Canulescu, et al.. Interfacial Structure and Photocatalytic Activity of Magnetron Sputtered TiO2 on Conducting Metal Substrates. ACS Applied Materials & Interfaces, Washington, D.C. : American Chemical Society, 2014, 6 (24), pp.22224-22234. ⟨10.1021/am5059298⟩. ⟨hal-01121262⟩
  • R. Shabadi, M. Suery, A. Deschamps. Characterization of Joints Between Aluminum and Galvanized Steel Sheets. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2013, 44A (6), pp.2672-2682. ⟨10.1007/s11661-012-1605-7⟩. ⟨hal-00933876⟩
  • Rajashekhara Shabadi, Roland Taillard, Bertrand Radiguet, Jérémie de Baerdemaeker, Elke Leunis. Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys. Solid State Phenomena, 2011, 172-174, pp.297-302. ⟨10.4028/www.scientific.net/SSP.172-174.297⟩. ⟨hal-02176554⟩
  • Alexandre Mathieu, Shabadi Rajashekar, Alexis Deschamps, Michel Suéry, Simone Matteï, et al.. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire). Optics and Laser Technology, Elsevier, 2007, 39 (3), p. 652-661. ⟨10.1016/j.optlastec.2005.08.014⟩. ⟨hal-00453170⟩
  • A. Mathieu, R. Shabadi, A. Deschamps, M. Suéry, S. MatteÏ, et al.. Dissimilar material joining using laser (aluminium to steel using zinc-based filler wire). Optics and Laser Technology, Elsevier, 2007, 39, pp.652-661. ⟨hal-00197079⟩

Poster

  • Devadas Bhat Panemangalore, Rajashekhara Shabadi, Mahavir Gupta, R. Ambat, Ahmed Addad, et al.. Microstructure and corrosion behavior of extruded Mg-Zn-Er alloys. THERMEC 2018, Jul 2018, Paris, France. ⟨hal-01912056⟩

Publications in internationally reviewed journals

2019

  1. Biocompatible silica-based magnesium composites, Devadas Bhat Panemangalore, Rajashekhara Shabadi, David Tingaud, Matthieu Touzin, Gang Ji, Journal of Alloys and Compounds, Volume 772, 2019, Pages 49-57, ISSN 0925-8388, doi.org/10.1016/j.jallcom.2018.09.060.
  2. Effect of fluoride coatings on the corrosion behavior of Mg-Zn-Er alloys, Devadas Bhat Panemangalore, Rajashekhara Shabadi, Manoj Gupta, Gang Ji,  Surfaces and Interfaces, In press, accepted manuscript,  Available online 19 November 2018.

2018

3.       Pravir Kumar, Ashis Mallick, Milli Suchita Kujur, Khin Sandar Tun, Rajashekhara Shabadi, Manoj Gupta, Strength of Mg–3% Al alloy in presence of graphene nano-platelets as reinforcement, Materials Science and Technology 34, 9, 1086-1095 (2018) DOI: 10.1080/02670836.2018.1424380

4.       Nadimpalli Raghukiran, Ravindran Sujith, Harshal Agrawal, Rajashekhara Shabadi, Ravi Kumar, In situ age hardening and grain refinement in as-sprayed Al-Sc binary alloy deposits, Journal of Alloys and Compounds, 735, 1596-1602 (2018) DOI: 10.1016/j.jallcom.2017.11.224

5.       Sravya Tekumalla, Nitish Bibhanshu, Rajashekara Shabadi, Satyam Suwas, Thi Mai Hoa Ha, Manoj Gupta, Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite, Materials Science and Engineering A, 727, 61-69 (2018) DOI: 10.1016/j.msea.2018.04.101

 

2017

6.       Tekumalla, S., Shabadi, R., Yang, C., Seetharaman, S., Gupta, M., Strengthening due to the in-situ evolution of ß1′ Mg-Zn rich phase in a ZnO nanoparticles introduced Mg-Y alloy, (2017) Scripta Materialia, 133, pp. 29-32.

7.       Din, R.U., Nikogeorgos, N., Jellesen, M.S., Shabadi, R., Ambat, R., Influence of steam-based pre-treatment using acidic chemistries on the adhesion performance of powder coated aluminium alloy AA6060, (2017) International Journal of Adhesion and Adhesives, 74, pp. 167-176.

2016

 

8.       Tekumalla, S., Seetharaman, S., Quy Bau, N., Leong Eugene Wong, W., Sim Goh, C., Shabadi, R., Gupta, M., Influence of Cerium on the Deformation and Corrosion of Magnesium,(2016) Journal of Engineering Materials and Technology, Transactions of the ASME, 138 (3), art. no. 031011, .

9.       Sankaranarayanan, S., Nguyen, Q.B., Shabadi, R., Almajid, A.H., Gupta, M., Powder metallurgy hollow fly ash cenospheres’ particles reinforced magnesium composites,(2016) Powder Metallurgy, 59 (3), pp. 188-196.

10.    Awin, E.W., Sridar, S., Shabadi, R., Kumar, R., Structural, functional and mechanical properties of spark plasma sintered gadolinia (Gd2O3), (2016) Ceramics International, 42 (1), pp. 1384-1391.

11.    Tekumalla, S., Yang, C., Seetharaman, S., Wong, W.L.E., Goh, C.S., Shabadi, R., Gupta, M., Enhancing overall static/dynamic/damping/ignition response of magnesium through the addition of lower amounts (<2%) of yttrium, (2016) Journal of Alloys and Compounds, 689, pp. 350-358.

12.    Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R.F., Kridli, G., Shabadi, R., Imad, A., Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets, (2016) Materials Science and Engineering A, 649, pp. 190-200.

2015

 

13.    Davísdõttir, S., Petit, J.-P., Shabadi, R., Canulescu, S., Almtoft, K.P., Dirscherl, K., Andersen, I.H., Ambat, R., Effect of interfacial oxide thickness on the photocatalytic activity of magnetron-sputtered TiO2 coatings on aluminum substrate,(2015) Physica Status Solidi (A) Applications and Materials Science, 212 (12), pp. 2805-2815.

14.    Gudla, V.C., Jensen, F., Simar, A., Shabadi, R., Ambat, R.Friction stir processed Al-TiO2 surface composites: Anodising behaviour and optical appearance, (2015) Applied Surface Science, 324, pp. 554-562.

15.    Shabadi, R., Avettand-Fènoël, M.N., Simar, A., Taillard, R., Jain, P.K., Johnson, R., Thermal conductivity in yttria dispersed copper, (2015) Materials and Design, 65, pp. 869-877.

 

2014

16.    Davisdóttir, S., Shabadi, R., Galca, A.C., Andersen, I.H., Dirscherl, K., Ambat, R., Investigation of DC magnetron-sputtered TiO2 coatings: Effect of coating thickness, structure, and morphology on photocatalytic activity (2014) Applied Surface Science, 313, pp. 677-685.

17.    Gudla, V.C., Canulescu, S., Shabadi, R., Rechendorff, K., Schou, J., Ambat, R.,Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings,(2014) Light Metals 2014, pp. 369-373.

18.    Ji, G., Tan, Z., Shabadi, R., Li, Z., Grünewald, W., Addad, A., Schryvers, D., Zhang, D., Triple ion beam cutting of diamond/Al composites for interface characterization,(2014) Materials Characterization, 89, pp. 132-137.

19.    Shabadi, R., Ambat, R., Dwarakadasa, E.S.,AZ91C magnesium alloy modified by Cd,(2014) Materials and Design, 53, pp. 445-451.

20.    Gudla, V.C., Canulescu, S., Shabadi, R., Rechendorff, K., Dirscherl, K., Ambat, R., Structure of anodized Al-Zr sputter deposited coatings and effect on optical appearance,(2014) Applied Surface Science, 317, pp. 1113-1124.

21.    Avettand-Fènoël, M.-N., Simar, A., Shabadi, R., Taillard, R., de Meester, B., Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing, (2014) Materials and Design, 60, pp. 343-357.

22.    Davídsdóttir, S., Petit, J.-P., Mermoux, M., Shabadi, R., Canulescu, S., Almtoft, K.P., Dirscherl, K., Ambat, R., Interfacial structure and photocatalytic activity of magnetron sputtered TiO2 on conducting metal substrates, (2014) ACS Applied Materials and Interfaces, 6 (24), pp. 22224-22234.

 

2013

23.    Daviosdóttir, S., Dirscherl, K., Canulescu, S., Shabadi, R., Ambat, R., Nanoscale surface potential imaging of the photocatalytic TiO2 films on aluminium, (2013) RSC Advances, 3 (45), pp. 23296-23302.

24.    Shabadi, R., Suery, M., Deschamps, A., Characterization of joints between aluminum and galvanized steel sheets, (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2672-2682.

25.    Kumar, C.M.P., Venkatesha, T.V., Shabadi, R., Preparation and corrosion behavior of Ni and Ni-graphene composite coatings, (2013) Materials Research Bulletin, 48 (4), pp. 1477-1483.

26.    Housaer, F., Legris, A., Béclin, F., Touzin, M., Tingaud, D., Ji, G., Shabadi, R. Characterization of Al/MWCNTs composites prepared by powder metallurgy routes(2013) MATEC Web of Conferences, 7, art. no. 01002, .

27.    Daviosdóttir, S., Dirscherl, K., Canulescu, S., Shabadi, R., Ambata, R. Photocatalytic activity influenced by thickness of TiO2 measured in nano and macro scale(2013) Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013, 1, pp. 57-60.

2012

28.    Shabadi, R., Suwas, S., Kumar, S., Roven, H.J., Dwarkadasa, E.S. Texture and formability studies on AA7020 Al alloy sheets(2012) Materials Science and Engineering A, 558, pp. 439-445.

29.    Rehouma, K.M., Shabadi, R., Taillard, R., Bouabdallah, M., Imad, A.Effect of aging at 700°C on ferrite transformation in a 316L/308L weldment(2012) Materials and Manufacturing Processes, 27 (12), pp. 1370-1375.

 

2011

30.    Shabadi, R., Taillard, R., Radiguet, B., De Baerdemaeker, J., Leunis, E. Effect of Mn on the nanoprecipitation in binary Fe-Cu alloys(2011) Solid State Phenomena, 172-174, pp. 297-302.

 

2007

31.    Mathieu, A., Shabadi, R., Deschamps, A., Suery, M., Matteï, S., Grevey, D., Cicala, E. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)(2007) Optics and Laser Technology, 39 (3), pp. 652-661.

 

2004

32.    Shabadi, R., Kumar, S., Roven, H.J., Dwarakadasa, E.S. Effect of specimen condition, orientation and alloy composition on PLC band parameters (2004) Materials Science and Engineering A, 382 (1-2), pp. 203-208.

33.    Shabadi, R., Kumar, S., Dwarakadasa, E.S., Roven, H.J. Propagative plasticity in commercial aluminium alloys (2004) Transactions of the Indian Institute of Metals, 57 (1), pp. 61-69.

 

34.    Shabadi, R., Kumar, S., Roven, H.J., Dwarakadasa, E.S. Characterisation of PLC band parameters using laser speckle technique, (2004) Materials Science and Engineering A, 364 (1-2), pp. 140-150.

2003

35.    Kumar, S., Shabadi, R., Patel, M.M. Influence of precipitation on serrated flow in Al-5Zn-1Mg alloy (2003) Materials Science and Technology, 19 (10), pp. 1344-1348.

 

2002

36.    Shabadi, R., Roven, H.J., Kumar, S., Dwarakadasa, E.S. Assessing formability of sheet metals through advanced tensile and laser speckle analysis(2002) Materials Science Forum, 396-402 (3), pp. 1623-1628.

37.    Shabadi, R., Roven, H.J., Dwarakadasa, E.S., Kumar, S. Dynamic plasticity in solid solution: Observations and quantification (2002) Metallurgia Italiana, 94 (7-8), pp. 21-26.