I. SCIENTIFIC REVIEW BOOKS

1. R.Merzouki, A.K.Samantaray, M.Pathak and B. Ould-Bouamama. Intelligent Mechatronic Systems: Modelling, Control and Diagnosis. Springer Verlag, ISBN: 978-1-4471-4627-8, 943 pages, 2013.
2. B. Ould-Bouamama "Modélisation et supervision des systèmes en génie des procédés: approche bond graphs » , ISBN-13: 978-6131501845, Editions Universitaires Europeennes, 164 pages, 2010.
3. A.K. Samantaray and B. Ould Bouamama. Model-based Process Supervision. A Bond Graph Approach. Springer Verlag, Series: Advances in Industrial Control, 490 p. ISBN: 978-1-84800-158-9, Berlin, 2008.
4. J.U. Thoma[1] and B. Ould Bouamama. Modeling and Simulation in Thermal and Chemical Engineering: Bond Graph Approach. Springer Verlag, ISBN: 3540663886, 219 pages, 2000.

II. SCIENTIFIC BOOK CHAPTERS

1. B. Ould-Bouamama, N. Chatti and A.L. Gehin. “SBG for Health Monitoring of Fuel Cell System,” M.O. Hamdan et al. (eds) ICREGA’14, Renewable Energy: generation and Applications, Chap.7, p. 72-86 Springer International Publishing Switzerland 2014.
2. B. Ould-Bouamama. « Contrôle en ligne d'une installation de générateur de vapeur par Bond Graph. Techniques de l'Ingénieurs » AG3551. 28 pages 2014
3. B. Ould-Bouamama. « La conception intégrée pour la surveillance robuste des systemes. Approche Bond Graph ». Techniques de l'Ingénieurs AG3550. 24 pages 2013.
4. N. Chatti, A.L. Gehin and B. Ould-Bouamama.: “Robust Fault Decision: Application to an omnidirectional Mobile Robot” Chapter 8. e-book-Mechatronic & Innovative Applications, ISBN: 97816080544 pp. 147-167, 2012.
5. R. Loureiro, R. Merzouki and B. Ould-Bouamama. “Structural Reconfigurability Analysis for an Over-Actuated Electric Vehicle”. Chapter 7: e-book-Mechatronic & Innovative Applications, Bentham Science. ISBN : 9781608054404, e-book-Mechatronic & Innovative Applications, pp; 127-146, 2012.
6. S. Benmoussa, R. Merzouki and B. Ould-Bouamama.” Bond Graph Model-Based Fault detection and Isolation: Application to Intelligent Autonomous Vehicle” Chapter 6 e-book-Mechatronic & Innovative Applications, Bentham Science. ISBN : 9781608054404, pp. 111-126, 2012.
7. Y. Touati, R. Merzouki and B. Ould-Bouamama. “Robust Monitoring of an Omnidirectionnal Mobile Robot”. e-book-Mechatronic & Innovative Applications, Bentham Science. ISBN : 9781608054404, pp. 87-110,  2012.
8. B. Ould-Bouamama. « Diagnostic en ligne à base de modèle Bond graph ». REE Revue de l’Electricité et de l’Electronique, N° 2, pp. 111-117, février 2010.
9. M. A. Djeziri, B. Ould Bouamama, G. Dauphin-Tanguy. “LFT Bond Graph Model Based Robust Control and Diagnosis”. Book Chapter in Springer Verlag, ISBN: 978-1-4419-9367-0, pp.105-1035, 2011.
10. Q. Yang, A. Aitouche, B. Ould Bouamama. “Structural Analysis for Fault Detection and Isolation in Fuel Cell Stack System”. Sustainability in Energy & Buildings: pp. 239-254, Springer, Berlin Heidelberg, ISBN 9783642034541, 2009.
11. B. Ould Bouamama et G. Dauphin-Tanguy. « Modélisation par Bond Graph. Application aux systèmes énergétiques". Techniques de l'Ingénieurs, Vol. BE2° BE8281, 2006, 16 pages.
12. B. Ould Bouamama et G. Dauphin-Tanguy. « Modélisation par Bond Graph. Eléments de Base pour l'énergétique". Techniques de l'Ingénieurs, Vol. BE2, BE8280, 12 pages, 2006.
13. B. Ould Bouamama. et J. U. Thoma. « Les Bond Graphs Procédés thermodynamiques et chimiques ». Chap.6 pp. 236-277, Collection IC2 Systèmes Automatisés Informatique Commande et Communication, Edition Hermes, 383 pages, Paris, 2001.
14. B. Ould Bouamama., M. Staroswiecki et Litwak R. « Surveillance d'un générateur de vapeur ». chap. 6. pp. 168-199, Collection IC2 Edition Hermes, Paris 2001.
15. B. Ould Bouamama., M. Staroswiecki et Litwak.: "Surveillance d'un générateur de vapeur". chap. 6.  pp. 168-199, Collection IC2 Edition Hermes, 204 pages, Paris 2001.

III) INTERNATIONAL PEER-REVIEWED JOURNALS 

1. Aqib Khan; Mathieu Bressel; Arnaud Davigny; Dhaker Abbes; Belkacem Ould Bouamama Review: Comprehensive Review of Hybrid Energy Systems: Challenges, Applications, and Optimization Strategies.  10.3390/en18102612 , energies-2025,  vol. 18, Issue 10, 2612
2. Balyogi Mohan Dash, Belkacem Ould Bouamama, Mahdi Boukerdja, Komi Midzodzi Pekpe “Prior Knowledge-Infused Self-Supervised Learning and Explainable AI for Fault Detection and Isolation in PEM Electrolyzers Neurocomputing”   Neurocomputing, Volume 594, 2024, 127871, ISSN 0925-2312, https://doi.org/10.1016/j.neucom.2024.127871
3. Balyogi Mohan Dash, Belkacem Ould Bouamama, Mahdi Boukerdja, Komi Midzodzi Pekpe, « Bond Graph-CNN based hybrid fault diagnosis with minimum labeled data », Engineering Applications of Artificial Intelligence, Volume 131, 2024, 107734, ISSN 0952-1976, https://doi.org/10.1016/j.engappai.2023.107734
4. Badoud, A.E., Mekhilef, S. & Ould Bouamama “A Novel Hybrid MPPT Controller Based on Bond Graph and Fuzzy Logic in Proton Exchange Membrane Fuel Cell System: Experimental Validation” Arab J Sci Eng 47, 3201–3220 (2022).
5. Boukerdja, M., Chouder, A., Hassaine, L., B. Ould Bouamama, Issa, W., & Louassaa, K. (2020). H∞ 649 based control of a DC/DC buck converter feeding a constant power load in uncertain DC 650 microgrid system. ISA Transactions, 105, 278–295. doi.org/10.1016/j.isatra.2020.05.031 https://doi.org/10.1007/s13369-021-06096-3
6. Sood, Sumit & Prakash, Om & Boukerdja, Mahdi & Bressel, Mathieu & B. ould Bouamama & J.Y. Dieulot. (2022) Robust diagnosis of PEM electrolysers using LFT Bond Graph. International Journal of Hydrogen Energy. 47 2022) International Journal of Hydrogen Energy. 47. https://doi.org/10.1016/j.ijhydene.2022.08.007 .2022.08.007.
7. Manarshhjot Singh, Anne-Lise Gehin, Belkacem Ould-Boaumama, Robust Detection of Minute Faults in Uncertain Systems Using Energy Activity Processes, MDPI, 2021, 9 (10), pp.1801. ⟨10.3390/pr9101801⟩
8. F. Mekeleche, H. Haffaf and B. Ould Bouamama “Hypergraph model for wireless sensor networks supervision design”, in  International Journal of System of Systems Engineering, vol. 11, Issue 1, 2021
9. B. Six, B. Ould Bouamama and A.Gehin, , Model builder for diagnosis and simulation of hybrid dynamic systems: Application to railway rolling stock, SIMULATION. 2021;97(1):45-62. doi:10.1177/0037549720958399, 2021.
10. Sood, Sumit; Prakash, Om; M. Boukerdja; Dieulot, J.Y.; B. Ould-Bouamama, B. Mathieu; G. Anne-Lise “Generic Dynamical Model of PEM Electrolyser under Intermittent Sources”, Sources. Energies 2020, 13, 6556, December 2020, 13, 6556, December 2020 https://doi.org/10.3390/en13246556
11. A. Termeche, B. Ould Bouamama, D. Benazouz and A. Ibrahim “Augmented analytical redundancy relations to improve the fault isolation”, September 2018, Mechatronics 55:129-140,DOI:  10.1016/j.mechatronics.2018.07.008
12. M. Bressel, M. Hilairet, D. Hissel, B. Ould Bouamama, “Model-based Aging Tolerant Control with Power Loss Prediction of Proton Exchange Membrane Fuel Cell”, International Journal of Hydrogen Energy, 2018, https://doi.org/10.1016/j.ijhydene.2018.11.219
13. M.S. jha, G. Dauphin-Tanguy  and B. Ould Bouamama Robust fault detection with Interval Valued Uncertainties in Bond Graph Framework”  Control Engineering Practice vol 71 (61-78), February 2018
14.  A. Ibrahim, A.L. Gehin and B. Ould Bouamama “On-line robust graphical diagnoser for hybrid dynamical systems”,  Journal of engineering applications of artificial intelligence, Volume 69, March 2018, Pages 36-49, 2017, https://doi.org/10.1016/j.engappai.2017.12.002
15. A. Ibrahim, A.L. Gehin  and B. Ould Bouamama , “Event Driven Hybrid Bond Graph for Hybrid Renewable Energy Systems”  Part I: Modelling and Operating Mode Management. International journal of hydrogen energy, December 2017, https://doi.org/10.1016/j.ijhydene.2017.10.144
16. P. Olivier, B. Ould Bouamama and  C. Bourasseau (2017) “Low-temperature electrolysis system modelling: a review in Renewable & Sustainable Energy Reviews Journal, vol. 78, p. 280-300, 2017
17. P. Olivier, B. Ould Bouamama and  C. Bourasseau (2016)  “Dynamic and multiphysic PEM electrolysis system modelling: A bond graph approach” International Journal of Hydrogen Energy 42(22)  https://doi.org/10.1016/j.ijhydene.2017.03.002
18. I. Abdesselam; H. Haffaf; B. Ould-Bouamama, “Bond-graphs and hyper-graphs in system of systems modelling” Int. J. of System of Systems Engineering ,  2016 Vol.7, No.4 ,  pp.313 – 338, 2016
19. M. S. JHA, M. Bressel, B. Ould-Bouamama, Genevieve Dauphin-Tanguy, M. Hilairet and D. Hissel, “Particle Filter Based Prognostics of PEM Fuel Cell Under Constant Load International” Journal of Renewable Energy Research-IJRER, Vol 6, No 2 (2016), pp. 644-657
20. M. S. JHA, M. Bressel, B. Ould-Bouamama, Genevieve Dauphin-Tanguy, M. Hilairet and D. Hissel, “Particle Filter Based Prognostics of PEM Fuel Cell Under Constant Load International” Journal of Renewable Energy Research-IJRER, Vol 6, No 2 (2016), pp. 644-657, , https://www.ijrer.org/ijrer/index.php/ijrer/article/view/3694
21. Jha, M. S., G. Dauphin-Tanguy and B. Ould-Bouamama (2016). "Particle filter based hybrid prognostics for health monitoring of uncertain systems in bond graph framework." Mechanical Systems and Signal Processing 75: 301-329. https://doi.org/10.1016/j.ymssp.2016.01.010
22. M. S. JHA, M. Bressel, B. Ould-Bouamama, Genevieve Dauphin-Tanguy, (2016), “Particle Filter Based Prognostics of PEM Fuel Cell Under Constant Load” International Journal of Renewable Energy Research-IJRER, Vol 6, No 2 (2016), pp. 644-657
23. M. Jouin,, M. Bressel,, S. Morando, R. Gouriveau,, D. Hissel, M.-Cecile Pera, N. Zerhouni, S. Jemei,, M. Hilairet, B. Ould Bouamama “Estimating the end-of-life of PEM fuel cells”: Guidelines and metrics  in Applied Energy 177, DOI: 10.1016/j.apenergy.2016.05.076
24. A. SallamI,   N. Zanzouri and B. Ould Bouamama “Robust Supervision of Industrials Systems by Bond Graph and External Models”, International Journal of Enhanced Research in Science Technology & Engineering ISSN: 23197463, Vol. 5 Issue 3, March 2016
25. M. Bressel, M. Hilairet, D. Hissel, B. Ould Bouamama, “Remaining Useful Life Prediction and Uncertainty Quantification of Proton Exchange Membrane Fuel Cell Under Variable Load”, IEEE  Transaction on Industrial Electronics, Vol. 63(4) 2016 2569 - 2577
26. M. I. Rahal, B. Ould bouamama,  a. Meghebbar, “Hybrid bond graph model based for robust fault detection and isolation” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. Vol. 230, No.2,  pp 145-163, February 2016  DOI: 10.1177/0959651815616026
27. M. Bressel, B. Ould Bouamama, D. Hissel, M. Hilairet, “A Review on Graphical Methods for Modeling a Proton Exchange Membrane Fuel Cell”, ASME - Journal of Fuel Cell Science and Technology, 2015, . Fuel Cell Sci. Technol 12(6), 060801 (Jan 20, 2016) (19 pages) Paper No: FC-14-1108; https://doi.org/10.1115/1.4032336
28. M. Bressel, M. Hilairet, D. Hissel, et B. Ould Bouamama « Extended Kalman Filter for prognostic of Proton Exchange Membrane Fuel Cell”, Journal of Applied Energy, Elsevier, Vol. 164, P. 220–227, 2015 https://doi.org/10.1016/j.apenergy.2015.11.071
29. B. Ould Bouamama, G. Biswas, R. Loureiro, R. Merzouki, Graphical methods for diagnosis of dynamic systems: Review, Annual Reviews in Control, Volume 38, Issue 2, 2014, Pages 199-219, ISSN 1367-788, https://doi.org/10.1016/j.arcontrol.2014.09.004.
30. N. Chatti, B. Ould Bouamama, A.L. Gehin and R. Merzouki. “Signed Bond Graph for multiple faults diagnosis” International Scientific Journal Engineering Applications of Artificial Intelligence. Vol. 36, pp. 134–147. Nov. 2014
31. Kumar P., Merzouki, R.; Conrard, B.; Coelen, V.; Ould Bouamama, B. "Multilevel Modeling of the Traffic Dynamic”, IEEE Transactions on Intelligent Transportation Systems, Vol. 15, n°3, pp.1066-1082, 2014.
32. R. Loureiro, S. Benmoussa, Y. Touati, R. Merzouki, B. Ould Bouamama. “Integration of fault diagnosis and fault tolerant control for healthy monitoring of class of MIMO Intelligent Autonomous vehicles”. IEEE Transaction on vehicular Technology Vol. 63, Issue 1, DOI 10.1109/TVT.2013.2274289, pp. 30-39, 2014.
33. S. Benmoussa, B. Ould-Bouamama, R. Merzouki. "Bond Graph Approach for Plant Fault Detection and Isolation: Application to Intelligent Autonomous Vehicle". Automation Science and Engineering, IEEE Transactions on, vol.11, no.2, pp.585-593, April 2014.
34. Abd Essalam Badoud, Mabrouk Khemliche, Belkacem Ould Bouamama, Seddik Bacha Bond graph algorithms for fault detection and isolation in wind energy conversion, Arabian Journal for Science and Engineering, vol. 39, n 5, pp 4057-4076, Springer berlin Heidelberg , doi.org/10.1007
35. A Abd Essalam Badoud, Mabrouk Khemliche, Belkacem Ould Bouamama, Seddik Bacha, Luiz Fernando Lavado Villa. Bond graph modeling and optimization of photovoltaic pumping system: Simulation and experimental results Simulation Modelling Practice and Theory, Elsevier, 2013, 36, pp.84 - 103. ⟨10.1016/j.simpat.2013.05.001⟩
36. N. Chatti, A.L. Gehin, B. Ould Bouamama, R. Merzouki. “Functional and behavioural models for the supervision of an intelligent and autonomous system”, IEEE Transactions on Automation Science and Engineering, vol. 10 , Issue n°2, pp: 431–445,  2013
37. E. Tarasov, I. Gahlouz, C. Sueur and B. Ould Bouamama “Extended Unknown input observer”, Procedia Computer Science 00 (2014) 1–13
38. M.A. Djeziri, R. Merzouki, B. Ould Bouamama and M. Ouladsine. “Fault Diagnosis and Fault Tolerant Control of an electric vehicle over-actuated”. Vehicular Technology, IEEE Transactions. vol. 62. Issue 3, pp. 986-994, March 2013
39. Y. Touati, R. Merzouki and B. Ould Bouamama. “Robust Monitoring of an Omnidirectionnal Mobile Robot”. Mechatronic \& Innovative Applications journal, pp.111-126, 2012.
40. Y. Touati, R. Merzouki and B. Ould Bouamama. “Robust diagnosis to measurement uncertainties using bond graph approach: Application to intelligent autonomous vehicle”  Mechatronics, Publisher (Elsevier),  Vol. 22, Issue 8, pp. 1148-1160, Dec. 2012
41. B. Ould Bouamama, R. El Harabi, M.N. Abdelkrim and M.K. Bengayed “Bond Graphs for diagnosis of Chemical Processes”. Computers & Chemical Engineering, vol. 36, pp. 301-324, 2012.
42. T. K. Bera, R. Merzouki, B. Ould Bouamama and A.K. Samantaray. “Design and validation of a reconfiguration strategy for a redundantly actuated intelligent autonomous vehicle”. Journal of Systems and Control Engineering vol. 226, n°8, pp. 1060-1076, sept. 2012.
43.  T. K. Bera, R. Merzouki, B. Ould Bouamama and A.K. Samantaray “Force control in a parallel manipulator through virtual foundations” Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering (Impact Factor: 0.78). 08/2012; 226:1088-1106. DOI: 10.1177/0959651812442604
44. R. Loureiro, R. Merzouki and B. Ould Bouamama. “Bond Graph Model Based on Structural Diagnosability and Recoverability Analysis: Application to Intelligent Autonomous Vehicles".  IEEE Transactions on Vehicular Technology, vol. 61, N° 3, pp. 986-997, March 2012.
45. Zaidi, B. Ould Bouamama and M. Tagina. “Bayesain reliability models of Weibull systems: State of the art”. International Journal of Applied Mathematics and computer Science, vol. 22, Issue 3, pp. 585-600, sept. 2012.
46. Zaidi B. B. Ould Bouamama and M. Tagina. “Bond Graph and Bayesian Networks for Reliable Diagnosis”. International Journal of SIMULATION: Systems, Science & Technology, vol. 12, Issue 5. 2012
47. W. Khalil and R. Merzouki, B. Ould Bouamama and H. Hafid. “Hypergraph Models for System of Systems Supervision Design”. IEEE Transactions on Systems, Man, and Cybernetics, vol. 42, n° 4, pp. 1005-1012, 2012.
48. Aitouche Q. Yang and B. Ould Bouamama. “Fault Detection and Isolation of PEM Fuel Cell System based on Nonlinear Analytical Redundancy”. European Physical Journal Applied Physics, vol. 54, n° 2, 11 pages, may 2011.
49. Aitouche and B. Ould Bouamama. “Sensor location with respect to fault tolerance Properties”. International Journal of Automation and Control Inderscience Publishers, Vol.4, Issue 3, pp. 298-316, 2010.
50. K. Fawaz, R. Merzouki, and B. Ould-Bouamama “Hybrid Fault Diagnosis for Telerobotics System”, Mechatronics IFAC Journal, vol.20, Issue 7, pp. 729-738, 2010.
51. M. A. Djeziri, B. Ould Bouamama and R. Merzouki. “Modelling and Robust FDI of Steam Generator using Uncertain Bond Graph Model”, Journal of Process Control, Vol. 19, Issue 1, PP. 149-162, 2009.
52. M. A. Djeziri and B. Ould Bouamama. Reliability Analysis of Leak Detection and Isolation System. J. of Energy and Power Engineering” ISSN1934-8975, USA.2009
53. M. A. Djeziri, R. Merzouki and B. Ould Bouamama. “Robust Monitoring of Electric Vehicle with Structured and Unstructured Uncertainties”. IEEE Transaction on Vehicular Technology; Vol. 58. Number 9. ISSN0018-9545; pp. 4710-4719, 2009.
54. Aitouche and B. Ould Bouamama. “Detecting and Isolating Actuators Faults  of Steam Boiler”, International Journal of Sciences and Techniques of Automatic control & computer engineering , IJ-STA, Volume 2,  W 2,  pp. 764−775, 2008.
55. M. A. Djeziri, R. Merzouki, B. Ould Bouamama and G. Dauphin-Tanguy. “Robust Fault Diagnosis Using Bond Graph Approach”. Int. Journal of IEEE/ASME Transaction on Mechatronics, vol. 12, Issue 6, pp. 599-611, 2007.
56. A.K. Samantaray, A.K., Ghoshal, K., Medjaher and B. Ould Bouamama. “Reconfiguration of an industrial steam generator using bond graph”. Int. J. Modelling, Identification and Control, vol. 2, Issue 2, 2007.
57. R. Merzouki, B. Ould-Bouamama, M. A. Djeziri and M. Bouteldja. “Modelling and Estimation for Tire-Road System using Bond Graph Approach”. Mechatronics IFAC Journal, Vol. 17, Issue 2-3, pp 93-108, 2007.
58. R. Merzouki, K. Medjaher, B. Ould-Bouamama and M. A. Djeziri. “Backlash Fault Detection in Mechatronics System”, Mechatronics IFAC Journal, Vol. 17, Issue 2-3, 299-310, 2007.  
59. N. Fouquet; C. Doulet; C. Nouillant; G. Dauphin-Tanguy and B. Ould Bouamama. “Model based PEM fuel cell state-of-health monitoring via ac impedance measurements”. Journal of Power Sources, Vol.159, Issue 2, pp.905-913, 2006.
60. M. Khemliche, B. Ould Bouamama and H. Haffaf. “Sensor Placement for component diagnosability using Bond graph”, Sensor and Actuators Journal, Vol. 132, Issue 2, pp.547-556, 2006.
61. A.K.Samantaray, K. Medjaher and B. Ould Bouamama, M. Staroswiecki, and G. Dauphin-Tanguy. “Diagnostic Bond Graph for Online Fault Detection and Isolation", Simulation Modelling Practice and Theory SIMPAT, Vol. 14/3. pp. 237-262, 2006.
62. Haffaf H., B. Ould Bouamama and G. Dauphin-Tanguy. “Matroid Algorihm for Monitorability Analysis of Bond graphs”. Journal of Franklin Institute and Applied  Mathematics, Vol. 343, Issue 1, pp. 111-123, 2006.
63. K. Medjaher, A.K. Samantary, B. Ould Bouamama and M. Staroswiecki .”Supervision of an industrial steam generator. Part II: On line implementation”. Control Engineering Practice CEP, Vol 14/1 pp 85-96, 2006.
64. Ould Bouamama, K. Medjaher, A.K. Samantary and M. Staroswiecki. “Supervision of an industrial steam generator. Part I: Bond graph Modelling”. Control Engineering Practice, CEP, Vol 14/1 pp 71-83, 2006.
65. Ould Bouamama, A.K. Samantary, K. Medjaher, M. Staroswiecki and G. Dauphin-Tanguy. “Model builder using Functional and bond graph tools for FDI design”. Control Engineering Practice, Vol. 13/7, pp. 875-89, 2005.
66. B. Ould Bouamama, K. Medjaher, M. Bayart, A.K. Samantaray and B. Conrard. “FDI of Smart actuators using Bond Graphs and external models". Control Engineering Practice, vol. 13, n°2, pp. 159-175, 2005.
67. A.K.Samantaray, K. Medjaher, B. Ould Bouamama, M. Staroswiecki and G. and Dauphin-Tanguy. “Component Based Modelling of Thermofluid Systems for Sensor Placement and Fault Detection”. SIMULATION : Transactions of SCS, Vol. 80, Issue 7-8, pp. 381-398, 2004.
68. Habbi, H., M. Zelmat and B. Ould Bouamama. “A dynamic fuzzy model for a drum boiler-turbine system”. Automatica. vol. 39, n°7, pp. 1213-1219, 2003.
69. B. Ould Bouamama. “Bond Graph Approach as analysis tool in thermofluid model library conception”. Journal of Franklin Institute", vol. 340, n°1, pp. 1-23, 2003.
70. B. Ould Bouamama, M. Staroswiecki, B. Riera and E. Cherifi. “Multi-Modelling of Industrial steam Generator”. Control Engineering Practice, vol. 8, n° 11, pp. 1249-1260, 2000.
71. Aitouche A., F. Busson, B. Ould Bouamama and M. Staroswiecki. “Multiple Sensor Fault Detection of Steam Condensers”. Computers et Chemical Engineering, pp. 585-588, 1999.

IV. PLENARY CONFERENCES

1. B. Ould Bouamama “Green hydrogen: energy for the future ?”, 6th IEEE International Conference on Artificial Intelligence in Renewable Energetic Systems, Tamanghasset Algeria 20-22 nov. 2022    https://icaires.com/
2. B. Ould Bouamama ICSMO 2021 9th International Conference on System Modeling and Optimization will be held in Budapest, Hungary on February 3-5, 2021 “http://www.icsmo.org/speakers.html
3.  “Bond Graphs as mechatronic approach for supervision design of multisource renewable Energy System” 5th International Conference on Mechanics and Mechatronics Research (ICMMR 2018), Tokyo,19-21 July , http://www.icmmr.org/2018.html  
4. B. Ould Bouamama. “Coupled Bond graphs for  Modelling, for Diagnosis for petrochemical processes” International Conference on advanced engineering in petrochemical industry ICAEPI’17: Nov. 28 – 30/ 2017 Skikda Algérie.. http://ftech.univ-skikda.dz/icaepi2017/index.php/guest-speaker-s 
5. B. ould Bouamama “Graphical and Multiphysics Modelling, for Diagnosis and Integrated Design: Theory and Applications” 4th International Conference on Mechatronics and Robotics Engineering2018 6th International Conference on System Modeling and optimizat http://www.icsmo.org/Schedule-2018.pdf, Valenciennes, Februaray, 7-11 2018
6. B. ould Bouamama  “Event‐ Driven Bond Graphs for robust modelling of continuous and hybrid mechatronic systems” International Conference on Electronics, Control, Optimization and Computer Science (ICECOCS’18) http://www.uit.ac.ma/icecocs2018/  , Kenitra, Morocco , Dec. 5-6 2018.
7. B. Ould Bouamama “Supervision of Multi-sources Renewable Energy Systems”: Event Driven Hybrid Bond Graph approach.” IC-AIRES'2017 International Conference on Artificial Intelligence in Renewable Energetic Systems 22-24 Octobre 2017, Tipaza, Algeria https://www.archeditech.org/keynote-n-4-mustapha-hatti
8. B. Ould Bouamama “Event‐ Driven Bond Graphs for robust modelling of continuous and hybrid mechatronic systems”, International Conference on Electronics, Control, Optimization and Computer Science (ICECOCS’18) Kenitra Maroc, http://www.uit.ac.ma/icecocs2018/
9. B. Ould Bouamama “Model Builder for Supervision System Design” CODIT 2018” 5th International Conference on Control, Decision and Information Technologies,   http://codit2018.com/index.php/keynote-speakers    
10. B. Ould Bouamama “Hybrid Bond Graphs for Supervision of Renewable Energy Systems : Application to Power to X Technologies”  International Conference on Control, Automation and Diagnosis (ICCAD'19) , Grenoble July 1-4 2019 http://www.iccad-conf.com/Speakers.html
11. B. Ould Bouamama. “Bond Graphs Modelling” 1st International and 16th National Conference on machines and mechanism (iNaCoMM2013) Roorkee India 18-20 december 2013 “http://www.nacomm2013.org/confprogramme.html
12. B. Ould Bouamama. Integrated design of industrial diagnosis systems. Colloque international sur le monitoring des systèmes industriels CIMSI’2012 19-20 Décembre 2012 Marrakech, Maroc. http://www.ensa.ac.ma/cimsi2012/doc/ProgrammeCIMSI1.pdf
13. B. Ould Bouamama Bond Graphs: An Integrating Tool for Design of Mechatronic Systems. IEEE International Multi Conference on Systems, Signals & Devices SSD’2011.
14. B. Ould Bouamama Integrated Design of Supervision Systems: Theory and Practice. Plenary lecture. International Conference on Systems and Systems and Information Processing. ICSIP’09, May 2-4 2009, Guelma Algeria
15. B. Ould Bouamama. Supervision of Industrial processes. Plenary lecture. 1st Mediterranean Conference on Intelligent Systems and Automation (CISA'08), June 30, July 2, 2008, Annaba, Algeria. http://lsc.univ-evry.fr/cisa08/doku.php?id=plenary_speakers  
16. G. Dauphin-Tanguy, B. Ould Bouamama and C. Sueur. Bond Graphs for Modelling and Much More. Conference Plenary lecture. International Conference on Bond Graph Modelling and Simulation, ICBGM, New Orleans, USA, 2005.

V.   INTERNATIONAL PEER-REVIEWED JOURNALS 

1. C. Jung, A. K. A. Toguyeni and B. Ould. Bouamama, "Supervised machine learning from digital twin data for railway switch fault diagnosis," 2023 European Control Conference (ECC), Bucharest, Romania, 2023, pp. 1-7, doi: 10.23919/ECC57647.2023.10178257  .
2. B. M. Dash, B. O. Bouamama, M. Boukerdja and K. M. Pekpe, "A Comparison of Model-Based and Machine Learning Techniques for Fault Diagnosis," 2022 23rd International Middle East Power Systems Conference (MEPCON), Cairo, Egypt, 2022, pp. 1-7, doi: 10.1109/MEPCON55441.2022.10021712
3. Prakash, O., Sood, S., Boukerdja, M., Ould-Bouamama, B., Dieulot, J. Y., Gehin, A. L., & Bressel, M. (2021, June). A Model-based Prognosis approach to Proton Exchange Membrane Water Electrolysis System. In 2021 European Control Conference (ECC) (pp. 2133-2138). IEEE.
4. B. Mohan Dash, B. Ould Bouamama, K. Midzodzi Pekpe and M. Boukerdja, "FDI-X: An Occlusion-based Approach for Improving the Explainability of Deep Learning Models in Fault Detection and Isolation," 2023 International Conference on Control, Automation and Diagnosis (ICCAD), Rome, Italy, 2023, pp. 01-06, doi: 10.1109/ICCAD57653.2023.10152392.
5. Manarshhjot Singh, Anne-Lise Gehin, Belkacem Ould Bouamama, Prognosis and Health Management using Energy Activity IFAC-PapersOnLine, Elsevier, 2021, ⟨10.1016/j.ifacol.2020.12.2766⟩
6. Sumit  Sood, Belkacem Ould Bouamama, Jean-Yves DIEULOT, Mathieu  Bressel, XiaoHong Li,  Habib Ullah,and Adeline Loh. Bond Graph based Multiphysic Modelling  of Anion Exchange Membrane Water Electrolysis Cell.   In  2020 28th Mediterranean  Conference on Control  and Automation   (MED), pages 752–757, Saint- Rapha¨el,  France, September 2020. IEEE.   URL  : hal.archives-ouvertes.fr/hal-03077592,  doi10.1109/MED48518.2020.9183344.
7. M. Bressel, M. Hilairet, B. Ould Bouamama, D. Hissel, « Aging Tolerant Control of Proton Exchange Membrane Fuel Cell : a Model-Based Approach », Conference on Advanced Control & Diagnosis 2017, Bucarest, Romania, 15-16 November 2017
8. B. Six, B. Ould Bouamama, S. Lintz, A.L. Gehin , Automated model builder of hybrid bond graph: Application to a two level inverter, IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED 2017), 29 Aug.-1 Sept. 2017, Tinos, Greece, DOI: 10.1109/DEMPED.2017.8062375
9. B. Merainani, C. Rahmoune  D. Benazzouz B. Ould Bouamama, “Rolling bearing fault diagnosis based empirical wavelet transform using vibration signal”. DOI: 10.1109/ICMIC.2016.7804169, Conference: 2016 8th International Conference on Modelling, Identification and Control (ICMIC)
10. I. Abdallah,  A.L.  Gehin and B. Ould-Bouamama, Hybrid Bond Graph Modelling of Multi-Source System for Green Hydrogen Production, IEEE 25th Mediterranean Conference on Control and Automation (MED 2017), Valletta, Malta, July 03-06, 2017 DOI: 10.1109/MED.2017.7984314.
11. B. Six, B. Ould Bouamama and A.L. Gehin, “Railway direct braking system analysis using hybrid bond graph”, IEEE, conference CODIT, , DOI: 10.1109/CoDIT.2016.7593531, St. Julian's, Malta 2016.
12. N. Kaci, B. Ould Bouamama , I. Boussaada and A. Debianne “Structural diagnosability analysis. Application to an induction motor”, - 11th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, (SDEMPED), Aug 2017, Tinos, Greece. IEEE, 2017 IEEE, pp.1-7  DOI: 10.1109/DEMPED.2017.8062374
13. I. Abdallah, A.L. Gehin, B. Ould Bouamama – Event Driven Hybrid Bond Graph, European Control Conference, June 29 - July 1, 2016,  Aalborg, Denmark.
14. M. Bressel, M. S. Jha,  B. Ould-Bouamama, M. Hilairet and D. Hissel, Bond Graph for modelling and diagnostics of Proton Exchange Membrane Fuel Cell, International Conference on Bond Graph Modeling and Simulation, Montreal, Canada, 2016
15. B. Six, B. Ould Bouamama, S. Lintz and A.L. Gehin, “Railway direct braking system analysis using hybrid bond graph”, IEEE, conference CODIT, , DOI: 10.1109/CoDIT.2016.7593531, St. Julian's, Malta 2016.
16. M. I. Rahal, B. Ould bouamama,  and A. Meghebbar  « Hybrid Bond Graph for Robust Diagnosis to Measurement Uncertainties” proceedings of the International Conference on Systems and Control, ICSC'2016 Marrakech, Morocco, 25-27, May 2016.
17. M. Bressel, M. Hilairet, D. Hissel, B. Ould-Bouamama, Dynamical modeling of Proton Exchange Membrane Fuel Cell and parameters identification, 6th International Conference on "Fundamentals & Development of Fuel Cells", FDFC 2015, Toulouse, France, 03-05 February 2015
18. M. Bressel, M. Hilairet, D. Hissel, B. Ould Bouamama, Fuel Cells Remaining Useful Life estimation using an Extended Kalman Filter,  41st Annual Conference of the IEEE Industrial Electronic Society, IEEE IECON 2015, Yokohama, Japan, 9-12 November 2015 -  Best presentation recognition in the special session entitled  "Fault Detection, Diagnostics & Prognostics in Electromechanical Devices"
19. M.I. RAHAL, B. OULD BOUAMAMA, A. MEGHEBBAR,”Hybrid Bond Graph for Robust Diagnosis-Application to Hydraulic System,” 3rd International Conference on Systems and Control, IEEE 2013, Algiers, Algeria, 29-31 Otober 2013, disponible en ligne doi:  10.1109/ICoSC.2013.6750989.
20. M. Jha, G. Dauphin-Tanguy, B. Ould Bouamama, Robust FDI Based On LFT BG And Relative Activity At Junction, in: Control Conference (ECC), 2014 European, IEEE, 2014, pp. 938-943.
21.  M.S. Jha, G. Dauphin-Tanguy, B. Ould Bouamama, Integrated Diagnosis and Prognosis of Uncertain Systems: A Bond Graph Approach in: Second European Conference of the PHM Society 2014 European Conference of the PHM Society 2014 Proceedings, Nantes, France, 2014, pp. 391-400.
22.  M.S. Jha, G. Dauphin-Tanguy, B. Ould Bouamama, New Concept of Junction Activity in a Bond Graph Model: Application for Fault Identification, Conference: 11 th. International Conference on Bond Graph Modeling and Simulation., Monterey, California ,USA.
23.  M.S. Jha, Mathieu Bressel, Belkacem Ould-Bouamama, Genevieve Dauphin-Tanguy, Mickael Hilairet and Daniel Hissel, Particle Filter Based Prognostics of PEM Fuel Cell in Bond Graph Framework, Selected for Presentation and Publication in 3rd Conférence Internationale des Energies Renouvelables (CIER-2015), Sousse - Tunisie, Décembre 21-23, 2015
24. M.S.JHA, Dauphin-Tanguy, G, Ould Bouamama, B., Interval Approach for Robust Fault Diagnosis, International Conference on Integrated Modeling and Analysis in Applied Control and Automation, 2012, Volume 1, 2012, Pages 239-246.
25. E. Tarassov, C. Sueur, and B. Ould Bouamama. “UIO Approach for Estimation of Non Linear Components Behavior ", CDC conference, IEEE Control Systems Society, Los Angeles USA, 2014
26. P. Kumar, R. Merzouki, B. Conrard, and B. Ould Bouamama “Multilevel Reconfiguration Strategy for the System of Systems Engineering: Application to Platoon of Vehicles IFAC World Congress, Vol. 19 | Part. 1 19th IFAC world congress 24-29 August 2014. Cape Town, South Africa, 2014.
27. Tarasov, E.; Gahlouz, I.; Sueur, C.; Ould Bouamama, B., "Bond graph UIO approach for fault components monitoring", Control and Fault-Tolerant Systems (SysTol) Conference on, pp. 257-262,, 2013, Nice, France.
28. D.Yang, E.Tarasov, C.Sueur and B. OuldBouamama (2013) Unknown Input Observer for control design: a bond graph approach, IFAC Proceedings 5^th iFAC symposium on control, Grenoble 2013, Volume 46, Issue 2, 2013, Pages 611-616https://doi.org/10.3182/20130204-3-FR-2033.00051
29. K. Mammar and B. Ould-Bouamama « Analysis of Impedance for Water Management in Proton Exchange Membrane Fuel Cells Using Factorial Design of Experiment (DoE) Methodology », ASME 2013 Volume 6B: Energy, San Diego, California, USA, November 15–21, 2013
30. Tarasov, E. I. Gahlouz, C. Sueur and B. Ould Bouamama. State and unknown input observer: analysis and design.  7th International Conference on Integrated Modeling and Analysis in Applied Control and Automation, IMAACA, September 25-27, 2013, Athens, Greece (selected for publication on the Special Issue  of the "International Journal of Computational Sciences)
31. N. Chatti, B. Ould Bouamama, A.L Gehin et Merzouki. Signed Bond Graph for health monitoring of PEM fuel cell in Proceedings of the 5th International Conference of Development of Fuel Cells - 5th International Conference of Development of Fuel Cells, Karlsruhe, 2013.
32. P. Kumar, R. Merzouki,  B. Ould Bouamama ''Microscopic Traffic Dynamics and Platoon Control Based on Bond Graph Modeling'', 16th international IEEE conference on intelligent transport systems (ieee-itsc13),  The Hague, Netherlands, Oct. 2013
33. K. Mammar and B. Ould-Bouamama “Analysis of Impedance for Water Management in Proton Exchange Membrane Fuel Cells Using Factorial Design of Experiment (DoE) Methodology”, ASME 2013, ISBN: 978-0-7918-5629-1, Volume 6B: Energy, San Diego, California, USA, November 15–21, 2013.
34. N. Chatti, B. Ould Bouamama,  A.L. Gehin, R. Merzouki “Merging Bond-Graphs and Signed Directed Graphs to improve FDI procedure”, 12th biannual European Control Conference, ECC’2013, July 17-19, Zurich, Switzerland.
35. B. Ould. Bouamama, I. Gahlouz and C. Sueur. Model Based for Structural Component Diagnosability Analysis. 2nd IEEE International Conference on Systems and Control, Marrakesh, Morocco, June 20-22, 2012.
36. K. Kumar and B. Ould Bouamama and H. Hafid. “Communication aspect in ICT for Freight Transport System” , ISBN: 978-1-61208-203-5, pp. 370-375, Venice, Italy, 2012
37. M. Djeziri, S. Benmoussa, B. Ould. Bouamama, M. Ouladsine. “Wavelet Decomposition Applied to Fluid Leak Detection and Isolation in Presence of Disturbances”. The 20^th MED conference, Barcelona, 2012.
38. M. Jha, G. Dauphin-tanguy, B. Ould Bouamama “Interval Approach for Robust Fault Diagnosis” 6th International Conference on “Integrated Modeling and Analysis in Applied Control and Automation” IMAACA’12, part of I3M2012  “International Mediterranean and Latin American Modelling Multiconference”, Vienne, Autriche, September 2012.
39. N. Chatti, Y.Touati, A.-L. Gehin, B. Ould. Bouamama and R. Merzouki. “Bond Graph Model Based and Fuzzy Logic For Robust FDI of Mechatronic Systems”. Proceedings of the 8th IFAC International conference SAFEPROCESS, vol. 8, number 1, pp. 126-131, Mexico, 2012
40. R. Loureiro, R. Merzouki, and B. Ould. Bouamama. “Structural reconfiguration conditions based on bond graph approach: application to an intelligent autonomous vehicle”. 8th IFAC International conference SAFEPROCESS, vol. 8, number 1Mexico, 2012.
41. R. Loureiro, R. Merzouki, and B. Ould. Bouamama. “Extension of the bond graph causality inversion method for fault detection and isolation: application to a mechatronic system”. Proceedings of the 8th IFAC International conference SAFEPROCESS, pp. 958-963, pp. 150-155, Mexico, 2012.
42. R. Loureiro, S. Benmoussa, Y. Touati, R. Merzouki and B. Ould. Bouamama. “Graphical Approach for State Reconstruction and Monitoring Analysis”. The 7Th IEEE Conference on Industrial Electronics and Application Singapore 2012.
43. S. Benmoussa, R. Merzouki, B. Ould. Bouamama. “Plant Fault Diagnosis using Bond Graph Approach: Application to Intelligent Autonomous Vehicle”. Proceedings of the 8th IFAC International conference SAFEPROCESS, vol. 8, number 1, Mexico, 2012.
44. Y. Touati, B. Ould. Bouamama and R. Merzouki. “Bond Graph Model Based for Fault Estimation and Isolation”. Proceedings of the 8th IFAC International conference SAFEPROCESS, vol. 8, number 1, pp. 138-143, Mexico, 2012
45. Uzunova, M.; B. Ould. Bouamama M. Djemai. “Hybrid Bond Graphs for Diagnosis of Three Cells Converter”, Proceedings of the 8th IFAC International conference SAFEPROCESS, vol. 8, number 1, pp. 162-167, Mexico, 2012
46. Y. Touati, B. Ould. Bouamama and R. Merzouki. “Fault Estimation Using Bicausal Bond Graph and Linear Fractional Transformation”. ICIEA 2012, Singapour, 2012.
47. Y. Touati, R. Merzouki, B. Ould. Bouamama, R. Loureiro. “Detectability and Isolability Conditions in Presence of Measurement and Parameter Uncertainties Using Bond Graph”. 8th IFAC International conference SAFEPROCESS, vol. 8, number 1, pp. 958-963, Mexico, 2012.
48. Y. Touati, R. Merzouki, B. Ould. Bouamama. “Fault Estimation and Isolation Using Bond Graph Approach”. 8th IFAC SAFEPROCESS conference, vol. 8, number 1, pp. 138-143, Mexico, 2012.
49. Y.Touati, B. Ould. Bouamama, R. Merzouki. “Fault detection and isolation in presence of input and output uncertainties using bond graph approach” Proceedings of the 5th international conference on integrated modeling and analysis in applied control and automation, IMAACA’2011, pp. 221-227, 2011.
50. N. Chatti, A.-L. Gehin, B. Ould. Bouamama, R. Merzouki, “Online Supervision of Intelligent Vehicle using functional and behavioural models”, 11^th IEEE intelligent vehicle symposium , pp. 827--832, Germany, 2011.
51. N. Chatti, W. Khalil, A-L. Gehin, B. Ould. Bouamama, R. Merzouki, “Intelligent Supervision Of Autonomous Heavy Vehicles: Application To Maritime Area”., The 13th International Conference on Harbor, Maritime & Multimodal Logistics Modelling and Simulation, Rome, Italy, pages 33-37, September 12-15, 2011.
52. S. Benmoussa B. Ould. Bouamama and R. Merzouki. “Component fault detection and isolation: comparison between bond graph and algebraic approach”. IMMACA'2011, Roma, Italy, 2011.
53. Y.Touati, B. Ould. Bouamama, R. Merzouki, “Robust residuals generation and evaluation using bond graph and linear filtering”. IEEE International Conference on Robotics and Biomimetics (ROBIO), pp.2318-2323, 7-11 Dec. 2011. 
54. Q. Yang, A. Aitouche and B. Ould. Bouamama. “Fault detection and isolation of PEM fuel cell system by analytical redundancy”, 18th IEEE, MED conference, ISBN: 978-1-4244-8092-0, pp. 1371-1376, 2010.
55. S. Benmoussa, M.A. Djeziri, B. Ould. Bouamama and Merzouki, R. “Empirical mode decomposition applied to fluid leak detection and isolation in process engineering “, 18th IEEE, MED conference, ISBN: 978-1-4244-8092-0, pp. 1537–1542, 2010.
56. Zaidi, B. Ould. Bouamama and M. Tagina. “Reliability Data for improvement of Decision-Making in Analytical Redundancy Relations Bond Graph based Diagnosis”. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 790-795, July 2010.
57. M. A. Djeziri, B. Ould. Bouamama and R. Merzouki. “Optimal Sensor Placement For Fault Diagnosis”. 5th IEEE International Conference on Mechatronics, 2009.
58. M.A. Djeziri, R. Merzouki and B. Ould. Bouamama. “Integrated Supervision Approach Applied to an Electric Vehicle”, ECC Conference, Budapest, Hungary, 2009.
59. Q. Yang, A. Aitouche and B. Ould. Bouamama. “Residuals Generation based on Nonlinear Analytical Redundancy Applied to Air Supply Sub-System of Fuel Cell”. 7th Workshop on Advanced Control and Diagnosis, Zielona Góra, Poland 2009.
60. Q. Yang, B. Ould-Bouamama and A. Aitouche. Structural Diagonasibility of Fuel Cell Systems:  A Bond Graph Approach. 7th IFAC SAFEPROCESS, Barcelona, Spain, 30 June-3rd July, 2009.
61. R. El Harabi, B. Ould Bouamama, M. E. Ben Gayed, M.N. Abelkrim., "Pseudo Bond Graph for Fault Detection and Isolation of an Industrial Chemical Reactor, Part II: FDI System Design. 9th ICBGM Conference, ISBN: 978-1-4503-0069-8, Orlando 2010.
62. R. El Harabi, B. Ould. Bouamama, M. El. Ben Gayed and M.N. Abelkrim, "Pseudo Bond Graph for Fault Detection and Isolation of an Industrial Chemical Reactor, Part I: Bond Graph Modeling", 9^th ICBGM Conference ISBN:978145030069-8, Orlando, 2010.
63. R. Merzouki, M.A. Djeziri, B. Ould. Bouamama. Intelligent Monitoring of Electric Vehicle. IEEE/ASME Conference on Advanced Intelligent Mechatronics, pp. 797-804,  Singapore, 2009.
64. W. Khalil, R. Merzouki and B. Ould-Bouamama, “Dynamic Modelling of a Train of Intelligent Vehicles inside a Confined Space”', 12th IFAC Symposium on Control in Transportation, Redondo Beach, USA, pages 619-626, Sep. 2 - 4, 2009.
65. Djeziri, B. Ould. Bouamama and R. Merzouki. Robust Fault Diagnosis of Energetic System with Parameter Uncertainties. Proceedings of the 17th IFAC World Congress, Seoul, 2008.
66. K. Fawaz, R. Merzouki and B. Ould Bouamama. Fault detection of actuators and channel transmission using virtual simulation. 17th IFAC World Congress, Seoul, 2008.
67. K. Fawaz, R. Merzouki and B. Ould Bouamama. Telediagnosis of Transmission Channel and Actuators Faults on a Mobile Robot. 17th IFAC World Congress, Seoul, 2008.
68. K. Fawaz, R. Merzouki and B. Ould-Bouamama. Fault Detection of Actuators and Channel Transmission Using Virtual Simulation. Proceedings of the 17th IFAC World Congress, Seoul, 2008.
69. K. Fawaz, R. Merzouki, B.Ould Bouamama. Intelligent Monitoring of an Industrial Robot. 9th IFAC Workshop on Intelligent Manufacturing Systems. October 2008, Szczecin, Poland. 2008.
70. M. A. Djeziri, B. Ould Bouamama, R. Merzouki and G. Dauphin-Tanguy. Bond Graph Model Based Monitorability Analysis”, Proceeding 7th France-Japan Congres on mechatronics Annecy, France, 2008.
71. M. Pathak, R. Merzouki, A. K. Samantaray, B. Ould. Bouamama. Reconfiguration of Directional Handling of an Autonomous Vehicle”. IEEE Third International Conference on Industrial and Information Systems (ICIIS), Kharagpur, INDIA, 2008.
72. M. A. Djeziri, A. Aitouch and B. Ould Bouamama.. Sensor Fault Detection of Energetic System using Modified Parity Space Approach. Proceeding of the 2007 Control and Decision Conference, CDC'2007 New Orleans, Louisiana, USA, 2007.
73. M.A. Djeziri, R. Merzouki, B. Ould-Bouamama and G. Dauphin-Tanguy. Bond Graph Model Based For Robust Fault Diagnosis. Proceeding of the 2007 American Control Conference (ACC) New York City, USA. pp. 3017-3022, 2007.
74. Niesner C., A. Aitouche and B. Ould-Bouamama (2007). "Analytical Redundancy for Sensor Fault Detection of Steam Generator". Conference on Systems and Control (CSC'07). Marrakech, Morocco, 16-18 May 2007.
75. K. A. Redouane , B. Ould Bouamama and A. Nakrachi. Generic bond graphs procedure for chemical reactions modeling. IMACS-IEEE, Vol.1, pp. 412–417, Beijing, CHINE, 2006.
76. K. A. Redouane, B. Ould Bouamama B., Nakrachi A. Integrated model of chemical reactor. 20th European Conference on Modelling and Simulation, ECMS 2006, pp , 122-127 May 28th - 31st Bonn, Allemagne, 2006.
77. K. Medjaher, R. Merzouki, B. Ould-Bouamama. Model Based Fault Detection of Backlash in Mechatronic Test Bench", CDC'2006, Conference on Decision and Control, San Diego, USA, PP. 6561-6566, December 2006.
78. M.A. Djeziri, R. Merzouki, B. Ould-Bouamama, G. Dauphin-Tanguy. Fault Detection of Backlash Phenomenon in Mechatronic System with Parameter Uncertainties Using Bond Graph Approach", ICMA'2006, IEEE International Conference on Mechatronic and Automation, PP. 600-605, June 25-28, 2006.
79.  B. Ould Bouamama, M. Staroswiecki and A.K. Samantaray. Software for Supervision System Design In Process Engineering Industry. 6th IFAC, SAFEPROCESS, pp. 691-695.Beijing, China, 29-1 sept. 2006. DOI:10.1016/B978-008044485-7/50109-3
80. R. Merzouki, B. Ould-Bouamama, M. A. Djeziri, M. Bouteldja. Modelling and Estimation for Tire-Road System using Bond Graph Approach. Proceedings of the 2006 IEEE/RSJ Intl. Conference on Intelligent Robots and Systems IROS2006, pp 3785-3790, Beijing, 2006.
81. W. El Osta, C. Sueur et B. Ould Bouamama. Monitorability indexes for fault tolerance analysis using a bond graph approach. 6th IFAC, SAFEPROCESS, pp. 1555-1560, Beijing, 2006.
82. Aitouche et B. Ould Bouamama. Fault Tolerant Control with respect to actuator failures . Application to steam generator process. European Symposium on Computer Aided Process Engineering-15 (ESCAPE), in proceedings, Edited by L. Puigjaner and A. Espuna. vol. 20B, pp.1471-1476.Barcelona, 29May-1, June 2005.
83. W. El Osta, A. Achir, B. Ould Bouamama and C. Sueur (2005). Diagnosability Analysis Based on Transcendence Degrees and Bond graph Models. 2nd International Conference IMAACA, Marseille, 2005.
84. W. El Osta, B. Ould Bouamama et C. Sueur. "Flatness for actuators monitoring in process engineering". 16th IFAC World Congress on Automatic Control theory, technology and applications, Prague, July 4-8, 2005.
85. W. El Osta, B. Ould Bouamama et C. Sueur. Structural representation based on multienergy bond graph. 17th IMACS World Congress on Scientific Calculus, Applied Mathematics, and Simulation, 1 - 15 July, Paris, France, 2005.
86. W. El Osta, B. Ould Bouamama et C. Sueur.. "Sensor Placement for Diagnosability Analysis in Thermofluid Process". 44th IEEE ECC-CDC, Seville, 2005.
87. W. El Osta, B. Ould. Bouamama et C. Sueur. Sensor Placement for Diagnosability Analysis in Thermofluid Processes. 44th IEEE ECC-CDC, Seville, 2005.
88. Aitouche, A.M. Lienhardt, B. Ould Bouamama. Fault tolerance analysis of sensor/actuator sets applied to a thermal process. Proceedings 16th Int. Conf. on Systems Engineering, ICSE'2003, Coventry University, vol.1, pp. 12-17,.UK, 2004.
89. M. Khemliche, B. Ould Bouamama and H. Haffaf. Optimal sensor placement using bond-graph model for FDI design. 7th IFAC Symposium on Cost Oriented Automation, Preprints edited by M. Zaremba  et al. , pp. 91-96, Ottawa Canada, June 7-9, 2004.
90. M. Lienhardt, A. Aitouche et B. Ould Bouamama. Fault Tolerant Estimation for Multisensor Non linear Systems, International Mediterranean Modeling Multiconference (I3M), Proceedings edited by A. G Bruzzone et al.  vol.2 pp. 177-181, Genova 2004.
91. Ould. Bouamama., K. Medjaher, M. Staroswiecki and A.K. Samanatary. Design of Diagnosis Algorithms for Supervision Systems in Process Engineering. International IMS (Intelligent Manufacturing Systems), Forum, proceedings edited by M. Taisch et al., Part I, pp. 491-498, Villa Erba, Cernobbio (Italy) 17-19 May 2004.
92. Stancu, B. Ould Bouamama, J. Quevedo et V.Puig. Integrating Bond Graph and Interval Models in Fault Detection and Isolation. International Mediterranean Modeling Multiconference (I3M), vol.2 pp. 167-176, Genova, 2004.
93. W. El Osta, B. Ould Bouamama and C. Sueur. Monitoring of thermofluid system using linearized multienergy bond graph. 7th IFAC Symposium on Cost Oriented Automation, Preprints edited by M. Zaremba  et al. , pp. 121-126, Ottawa Canada, June 7-9, 2004.
94. B. Ould Bouamama, A.K. Samanatary, G. Dauphin-Tanguy et M. Staroswiecki. Causality Inversion Approach in Derivation of Analytical Redundancy Relations for Fault Detection and Isolation. International Conference on Bond Graph Modelling and Simulation, ICBGM'2003 Orlando, Florida, vol. 35, n°.2,pp. 104-109, january 2003.
95. B. Ould Bouamama, K. Medjaher, A.K. Samanatary and M. Staroswiecki. Model builder for Process Engineering diagnosis. 4th International Conference on Industrial Automation, Montréal (Canada), Proceedings ISBN2-9802946-3-2, June 9-11 2003.
96. R. Mrani Alaoui, B. Ould Bouamama, P. Taillibert. Empirical validation of a decision procedure based on temporal band sequences analysis for thermo-fluid processes. Proceedings of 5th IFAC SAFEPROCESS pp. 741-746, Washington,  June 9-11, 2003.
97. B. Ould Bouamama, M. Bayart, J. Quevedo, S. De Las Heras and K. Medjaher. "Bond Graph and External Modeling for FDI Design of Smart Actuators". IEEE-SMC, IMACS, Tunisia, 2002.
98. Khelassi, C. Bouyahiaoui, A. Maidi, A. Benhalla, M. Djellal and B . Ould Bouamama.. "Inter-play between equipment design and performances in distillation columns". 15th International Congress of Chemical and Process Engineering, 25-29 ISBN 80-86059-33-2, Praha,.2002.
99. Khelassi, C. Bouyahiaoui, A. Maidi, A. Benhalla, M. Djellal et B. Ould Bouamama.. Optimal Fuzzy Control to optimise Energy Consumption in Distillation Columns.15th IFAC World Congress, Barcelona, Spain, July 21-26, 2002.
100. M. Bayart, B. Ould Bouamama et B. Conrad. "FDI smart actuators using Bond Graphs and external models". World Congress on Automatic Control IFAC, Barcelona, 2002.
101. B. Ould Bouamama, M. Staroswiecki et G. Dauphin-Tanguy. "Actuator Fault Detection Using Bond Graph Approach". European Control Conference, ECC'2001, pp. 2735-2740, Porto, 2001.
102. B. Ould Bouamama, M. Staroswiecki, G. Dauphin-Tanguy, A. Khellassi, A. Benhalla et M. Zelmat. Monitoring ability analysis using bond graph approach. Application to distillation column 4th IFAC Workshop on "on-line fault detection and supervision in the chemical process industries", pp. 388-393, Jejudo, Korea, June 7-8 2001.
103. Ould Bouamama, A.L. Gehin and M. Staroswiecki. Alarm Filtering by Component Modelling and Bond Graph approach". 4th IFAC Workshop on "on-line fault detection and supervision in the chemical process industries", pp. 198-203, Jejudo, Korea, June 7-8 2001.
104. Ould Bouamama. Model builder for Thermo-fluid Systems Using a Bond Graph and Functional Modelling. 3th European Simulation Symposium ESS'01, pp. 822-826, Marseille 2001.
105. B. Ould Bouamama and J.P. Cassar. Integrated Bond graph modelling in Process Engineering linked with Economic System. European Simulation Multiconference ESM'2000, pp. 23-26, Ghent (Belgique), Mai 2000.
106. B. Ould Bouamama, F. Busson, G. Dauphin-Tanguy and M. Staroswiecki. Analysis of a structural properties of thermodynamics Systems. 4th IFAC SAFEPROCESS., pp. 1068-1073, vol.2, Budapest, 2000.
107. B. Ould Bouamama, G. Dauphin-Tanguy, M. Staroswiecki and D. Del Amo Bravo. Bond Graph Analysis of Structural FDI Properties in Mechatronics System. 1st IFAC Conference Mechatronic System, pp. 1057-1062, vol. 3, Dusseldorf, Sept. 2000.
108. F. Busson and B. Ould Bouamama.. "Monitoring of a Steam Generator using a Bond Graph Approach". IFAC Symposium on Power Plant and System control, pp. 318-323, Brussels, 2000.
109. B. Ould Bouamama, G. Dauphin-Tanguy, M. Staroswiecki and F. Busson. Bond Graph Technique as a Decision-Making Tool in Supervision Systems. Conference IEEE in Graph Thoretic and Entropy Methods, pp. 91-97, Canada, 1999.
110. S.Lamiri, B. Ould Bouamama et J.P. Richard. "Modelling of a Steam Generator Using Distributed Parameter Equations". 3rd World Multiconference  on Circuit Systems, Communications and Computers, IEEE, CSC'99 , pp. 217-222, Gréce, 1999.
111. B. Ould Bouamama et A. Nakrachi. "Bond Graph model of pervaporation process". IEEE-SMC, IMACS, pp. 547-551, Tunis, 1998.
112. B. Ould Bouamama, E. Cherifi, M. Staroswiecki et B. Riera.. "Supervision of Complex Systems Using Functional, Structural and Bond Graph Models. Application to a Steam Generator and its Environments". 3rd IFAC Workshop, Solaize Lyon, 4-5 june 1998.
113. B. Ould Bouamama, R. Litwak et M. Staroswiecki. "Detection and Isolation of Process Faults in an Industrial Boiler". 3rd IFAC Workshop, Solaize IFP Lyon,  4-5 june 1998.
114. Busson F., A. Aïtouche, B. Ould Bouamama et M. Staroswiecki... "Sensors Failures Detection in Steam Condensers". 3rd IFAC Workshop, on-line-Fault detection and supervision in the chemical process industries, Solaize Lyon, France, 4-5 june 1998.
115. B. Ould Bouamama., J. U. Thoma and J.P. Cassar.. "Bond graph modelisation of steam condensers". IEEE-SMC, IMACS, pp. 2490-2494, vol. 3, Olando,1997.
116. Rimaux S., B. Ould Bouamama et G. Dauphin-Tanguy. Bond Graph Model of the Shrink and Swell phenomenon in a PWR Nuclear Power Plant. IEEE-SMC IMACS, pp. 288-292, Lille, 1996.
117. B. Ould Bouamama. et G. Dauphin-Tanguy. "Bond Graph model of a steam generator process and its environment. European Simulation Multiconference pp. 238-242, Budapest, 1996.

VI  SOFTWARE DESIGN

The FDIPad software is an integrated design tool for on-line process monitoring systems. It was developed as part of the European CHEM project by Professors Belkacem Ould Bouamama and Marcel Staroswiecki of Polytech'Lille, and Arun Kumar Samantaray (programming) of the Indian Institute of Technology, Kharagpur (http://www.iitkgp.ac.in/), as a toolbox within the SYMBOLS2000 software. The user introduces the architectural model (Piping and Instrumentation Diagram) from a generic database composed of three classes: processes, sensors, and controllers displayed on the Human Machine Interface HMI. Users can create their own components. Each component is associated with a dynamic model of the faulty bond graph. The global model is then created by connecting the various components according to syntactic connection rules and introducing the instrumentation and control system. As output, the user generates : A formal dynamic model (in symbolic form) which can then be used for simulation, knowing the numerical values of the parameters. This model can be exported in XML or Simulink format, fault indicators in formal form (expression linking only known variables: measured and control) which will be used for real-time monitoring, and system monitorability (in the form of a monitorability matrix): components which can be monitored from a specification and from the existing instrumentation architecture which the user introduces on the HMI. If the specifications are not met, the user can then change the instrumentation architecture graphically (sensor placement) to improve process monitorability.